Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

BROWNELLS
BROWNING AUTO-5 SCREWDRIVER SET

050806006133 080000440

Self-Storing, Carry Along For 'Smiths & Shooters

On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four, slotted, thin bits precisely matched to fit all the Auto-5 s external screws.

SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.

Más...

Autoguardado, Para Llevar Contigo Tanto para 'Armeros' como para Tiradores

Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier lugar. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para proporcionarte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, mango hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas delgadas y ranuradas combinadas con precisión para encajar en todos los tornillos externos del Auto-5.

ESPECIFICACIONES: 8" (20.3cm) de largo en total. Diámetro del mango de 1¼" (3.2cm).

Más...

Evaluaciones de clientes para BROWNELLS BROWNING AUTO-5 SCREWDRIVER SET

Número de evaluaciones: 13
De brownells.com: 13
Evaluación media: 3,5

A must for people who work on the A-5 (04/05/2010)

This is the very best screw driver set for ths A-5 Browning. They won't crack or chip if used properly. The steel is of high grade and fit the A-5 screw heads perfectly. Like the rating says doesn't get any better than this. Thanks for a great product.
Randy Nuschler

Exactly Designed (25/04/2014)

I've used three of the bits so far on an Auto-5 built in 1947 (no schematics I've found with the trigger safety at the front of the trigger guard), yet to disassemble the trigger group. All fit precisely, variable screw head diameters but all slots are 0.025" wide.
Not included is a bit small enough to remove the three small screws holding the shell stop and carrier latch. A 1/8" pocket-type flat blade handles those. Most of you will have the roll pins anyway. I wish you well with that.

Broken Bit (30/09/2015)

I recently purchased a Browning A5 shotgun and didn't have the correct screwdriver bits to remove the stock or action of the gun.

I ordered this bit kit and the bits fit perfectly. I tightened the stock screw back up and snapped the bit right off. I called service to complain but realized after speaking to the very helpful rep that the bits are designed to snap off if too much torque is applied to prevent rounding off the gun screws.

I am a maintenance supervisor and agree that this is a great design and did probably protect the screw as I have a habit of "overtightening" screws and bolts.

Brownell's replaced the bit at no charge and I will be more careful in the future to torque them to spec.

Thanks for the great service.

Exactly what you need, but......... (27/06/2016)

I have no idea how you would disassemble an Auto-5 without these. These bits are ground super thin so that they fit all the browning flat head screws. The offshoot of that though, is that they are ground SUPER THIN!!! This makes them very delicate, but there is simply no other way to get the bits thin enough to fit the screws. On my particular Browning, it hadn't been field stripped in decades. I twisted the two smallest bits, which also damaged the two corresponding factory screws. No problem though, Brownells sells the screws and they replaced the bits free of charge. I wouldn't hesitate to buy these again though, definitely the right tools for the job!

Excellent product (27/03/2018)

Excellent product. Bits fit every screw perfect.

Right size, too fragile (27/08/2018)

These are what you need to work on an auto 5. Just that browning seems to think it's a good idea to apply more torque than should physically exist to all of their screws so you end up breaking these constantly. I order these in sets of 3 or 5 at a time because I know they won't last through more than 2 or 3 jobs at best.

Not a 1 star because it actually fits and is the right size.

Grrrrrrrrrrr........... (03/03/2011)

This was my first Brownell's purchase in many years. When I unpacked the tool, it was immediately noticeable that the white screw on cap was cross threaded. I removed the 4 tips and worked with the cap to finally get the threads to properly mesh. Upon putting the 4 tips back in the storage compartment, the cap once again cross threaded. At that point I noticed that with 4 tips in the storage handle there was not enough "head room" for the cap to screw on and the result was the cap cross threading before it bottomed out. Disappointed.

Browning Screwdriver Set (30/12/2011)

I didn't buy the handle, so I didn't have the problem the other reviewer had. But the blades on these bits are perfect for a Browning Auto-5 and better than the other gunsmith bits I have for most other firearms. The Auto-5 has a LOT of screws and if you're going to take one apart you'd better have the proper tools.

Superb kit for any A5 owner (24/05/2012)

I used this set to take down two seperate Browning Auto 5's and I have no complaints. I didn't mangle any of the screws and I find the fit of the bits to the screws to be excellent. If you have a A5, you should own this kit. For the price, there's no reason not to.

Bit Broke Immidiately... (21/04/2015)

The small bit used to loosen lock screws broke immediately when very moderate pressure was applied. These bits are much too weak to handle the job.

Small tip 210-1 broke pretty quickly. (13/02/2016)

Thin blade used to loosen screw that hasn't been turned in years will break. Next time I will start with heat. You really have to have this set or you WILL damage the screw heads. These are the right tools for the A5. At this price I just bought a couple sets which I do recommend.

WASTE OF MONEY (14/03/2017)

It doesn't come with a flathead for the small locking screws! And they are poorly designed, so they bend and or break.

UNNECESSARY & OVER-RATED (06/12/2017)

I bought this set with plans on using it to fully disassemble and reassemble a Browning A5 12-Gauge Magnum, thinking it would be almost be a "requirement". Wrong! I completed the entire job with just ONE of the four screwdriver bits included in this set, and that one bit was easily bent with even a modest amount of force applied to it. Consequently, I wouldn't buy into the hype about this set being unique to the Model A5, nor would I recommend this set to anyone. Its completely unnecessary. You'll do just fine with almost any thin, small, flathead screwdriver.

Leer 13 mas calificaciones en brownells.com

26.9 45.9 2 EUR

N.º de producto: 080000440
BROWNELLS BROWNING AUTO-5 SCREWDRIVER SET 050806006133 Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier lugar. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para proporcionarte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, mango hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas delgadas y ranuradas combinadas con precisión para encajar en todos los tornillos externos del Auto-5.

45.9 EUR 52 45,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Estilo: 4-Bits Hacer: Browning Manejo: 84 Hollow Modelo: Auto-5

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El set incluye puntas Magna-Tip® precisas para un ajuste perfecto con los tornillos del Browning Auto-5.
El mango hueco y el casquillo magnético facilitan el almacenamiento y uso de las puntas.
Diseñado tanto para el taller como para el campo, es compacto y fácil de transportar.

Atributos

Estilo: 4-Bits Hacer: Browning Manejo: 84 Hollow Modelo: Auto-5 Peso de entrega: 0,136kg Altura de envío: 10mm Ancho de envío: 25mm Longitud de envío: 155mm UPC : 050806006133

Detalles del artículo

Hecho en USA

N.º de producto: 080000446
BROWNELLS BROWNING AUTO-5 SCREWDRIVER BITS ONLY 050806006164 Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier lugar. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para proporcionarte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, mango hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas delgadas y ranuradas combinadas con precisión para encajar en todos los tornillos externos del Auto-5.

26.9 EUR 101 26,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: Browning Modelo: Auto-5

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El set incluye puntas Magna-Tip® precisas que se ajustan perfectamente a los tornillos del Browning Auto-5.
Incluye un casquillo magnético y un mango hueco para almacenar las puntas fácilmente.
Cuatro puntas delgadas y ranuradas diseñadas específicamente para encajar en todos los tornillos externos del Auto-5.