Su cesta está vacía.

Cesta

926-532900

Suscribirse al boletín

METALFORM
1911 9MM MAGAZINES

620009082

Traditional & Increased-Capacity Magazines For 1911 Colts, Copies & Compacts

Robust, high-quality U.S. made magazines in blued carbon steel and stainless steel for 1911 Auto pistols chambered in a variety of calibers. Choose from round or flat steel followers, both designed to give positive last-round feeding with all bullet types, including wadcutters. Safety orange nylon follower is concave to hold an additional round. Removable – Steel plate detaches for easy internal cleaning of mag; also accepts Bumper Pads.

SPECS: Blued carbon steel (Blue) or natural-finish stainless steel (Stnls). Approximately 5" (12.7cm) long. Followers – Stainless steel, natural silver or black finish, flat or round contour. Some magazines have concave safety orange nylon follower.

Más...

Cargadores Tradicionales y de Alta Capacidad Para Pistolas 1911 Colts, Réplicas y Compactas

Robustos cargadores de alta calidad fabricados en EE. UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para garantizar una alimentación positiva del último cartucho con todos los tipos de balas, incluidos los wadcutters. El seguidor de nailon naranja de seguridad es cóncavo para contener una ronda adicional. Extraíble – La placa de acero se desprende para una limpieza interna fácil del cargador; también acepta almohadillas de tope.

ESPECIFICACIONES: Acero al carbono azulado (Blue) o acero inoxidable de acabado natural (Stnls). Aproximadamente 5" (12.7cm) de largo. Seguidores – Acero inoxidable, acabado natural plateado o negro, contorno plano o redondo. Algunos cargadores tienen seguidor de nailon naranja de seguridad cóncavo.

Más...

Evaluaciones de clientes para METALFORM 9MM GOVT/COMM S/S 9 RD. FLAT FOLLOWER W/REMOVABLE BASE

Número de evaluaciones: 26
De brownells.com: 26
Evaluación media: 3,8

i need more of these (18/08/2009)

i got one of these to try and it has never missed a beat in my caspian slide/frame and Kart barrelled IDPA gun....i'm getting two more today......[*]

Go Bang every time. (26/11/2009)

I have been messing around with 1911 9mm for nearly 10 years in IDPA. I have tried them all, Wilson, Colt, and the "front dent" Metalforms and this without a doubt is the ONLY mag to use for ESP! The Metalform folks did it right.

best 9mm mag there is! (11/01/2010)

Have tried many but this is the best. Loads all 10 rounds easily and the bullets never "nose dive" causing a jam. Will order 2 more now!

Excellent Product (28/01/2010)

I have tried factory Para/Wilson Combat and one other mag. Nothing prevented the inevitable stovepipe of the first one to three rounds in my 1911. Got these mags and NOT ONE problem since. I cannot say enough good about these mags [...]

Flawless (31/01/2012)

Several hundred rounds through each of my three 10 round mags without a hiccup. Perfect for IDPA or IPSC. Seated happily every time, even during competition. Base is just the right height to keep the mag from hitting/breaking the ejector even on the hardest of reloads.

Great mag for the $$ (06/03/2012)

Surprised by these inexpensive mags. Not a single feed issue.
They are a bit hard on the fingers after feeding several mags.
The base pad is perfect for magwells.

Great Magazine, Will be buying more. (11/03/2012)

These magazines are great. Quality construction. i would buy again and again.

Disappointing magazine for a Dan Wesson (18/05/2012)

I have used three of these magazines in a Dan Wesson Pointman 9. I have had multiple feed problems using all three of the Metalform magazines. Used them in two USPSA competitions and defensive pistol classes. More misfeeds than I have ever had with any pistol/magazine combination, using Kimbers and Dan Wesson Pistols.

When fully inserted into the magwell, the magazine is loose with about a millimeter play. I have used Dan Wesson and Wilson Combat magazines without feed issues in the same pistol.

Based upon the other reviews of this product on this website, I'm guessing that it is a firearm manufacturer or caliber specific problem.

Would not recommend these magazines in this caliber for Dan Wesson products.

Tight fit in a Springfield Armory (24/04/2013)

I bought four of these for my new Springfield Armory 1911-A1 and none of them fit correctly. They were so tight in the gun that I had to force them out. The two factory mags dropped free and were even a little loose when seated. I returned them for exchange.

Great mazazines (27/04/2013)

My wife and I both have Springfield 9MM 1911 A1s and I origionally tried 4 magazines. We both use the magazines and have absolutely no problems! They are not too tight & drop right out of the gun. We have had no malfunctions. I was so pleased I ordered another 4 magazines. We both have other 1911 .45 handguns and have had various success with both the OEM magazines and other non OEM magazines so I was pleased these magazines have worked out so well.

ORDER WILSON COMBAT (12/08/2013)

NONE of these dropped from from the gun when released. One had to be forced INTO position. Unfortunately, becuase otherwise the materials and construction are solid.

Poor Fit (26/04/2014)

Will not fit Taurus 1911 9mm. Factory mags glide in and out. This mag did not fit at all at fist. There was a high spot in the Taurus the kept the factory mags from rattling. After filing down the high spot slightly the mag made it to the mag catch and stopped. I needed to press the mag relies to get the mag filly seated. Then the mag would get caught up on something else on the way out. I don't know if this is a testament to Taurus quality or Metalform.

Great Magazine !!!! (15/06/2015)

Built a Custom 1911 in 9mm for myself and these magazines function and fit perfect. Not much to say these mags work.

Will be buying more!!!!

Great product (03/01/2016)

This magazine works flawlessly in my Colt 9mm XSE. Very easy to load all 10 rounds in this magazine (even the 10th round!). I have not experienced any misfeeds, or any malfunctions of any type.

Generally fails to lock SA RO Champion (17/02/2016)

I bought two of these needing 10 rounders for an upcoming match and no one had other major manufacturers in stock.

The good: they hold 10 rounds and fed all the rounds reliably with no jamming/misfeeds etc.

The bad:

One always fails to lock back on empty, the other fails 50% of the time. The issue is the follower slips up past the slide stop rather than pushing up the slide stop.

The additional downside of this is the magazine then won't drop free without a tug as the follower condition results in lateral pressure from the slide stop against the side of the follower holding the magazine in the gun.

I thought perhaps it was increased spring pressure of the 10 round magazines but I measured the force of the spring pressure using my trigger gauge and when empty, it actually has 3/4 to a full pound LESS spring pressure than the stock SA magazines.

I can replicate the behavior even just inserting an empty magazine into the gun and the follower slips past the slide stop.

None of my other magazines have any issues.

I suppose I'll keep them (and mark them) for malfunction practice, but I don't recommend them.

Great Performance, better than stock mag (09/08/2014)

I have a Dan Wesson Guardian 1911 9mm. I bought this Metalform mag to try. I shot 238 rounds out of it today - FLAWLESS performance. I prefer this over the Checkmate stock mags which required some 'tweaking' to work properly. However, out of the package the Metalform was perfect. I was able to load a full 9 rounds + 1 in the chamber and the feeding is smooth.

Perfect for my PARA 9mm (16/03/2015)

These mags work great in my 9mm PARA Expert, model 96749. I plan on ordering a couple more, although I would rather just as soon have the less expensive blued mags which were out of stock when I ordered these.

Oustanding performance (15/03/2017)

I bought three for my Taurus 1911 9mm and after +600 rounds... the performance was excellent.

Best regards

I would buy this magazine again (07/02/2011)

I have been using these Metalform 9mm magazines for years in my Colt 1911 9mm, I would say that anyone that needs a 9mm magazine for their 1911 that is one to buy. I have never had any issues with feeding with these magazines at all.

Great replacement mag (11/10/2012)

I have tried other mags that claimed to work in the STI Duty One 9mm. They all had problems with fit, feed or eject. This one works great. No problems whatsoever. It works better than the original and looks better in the weapon. I am VERY happy I found it.

metalform 1911 magazine 9mm (28/01/2013)

Bought 6 of these for my 1911 Les Baer. NONE of them function in my gun. Springs are to weak to eject from gun. Garbage!!!

Poor magazine (17/06/2013)

I bought 2 of these for my RIA 9mm. First of all, neither would fit in the gun. One would insert, but became very tight and had to be forcibly removed from the gun. The other wouldn't insert at all. Got about 1/2 way in and stopped dead. Liberal use of sanding on high points eventually got them to fit, but function was spotty. Rounds nose dive into the feed ramp and jam the pistol. Especially if loaded to capacity. Misfeeds. And one of them won't lock the slide open on the last round. The spring appears to be week and won't hold the slide stop up. Every other brand of magazine I've tried in the gun work perfectly, with Cobra mags being the best of the lot.

I will buy more of these!!! :) (19/09/2013)

I have a rare Springfield Armory 1911-A1 and only had one original mag for it. I saw poor ratings for these but took a chance and ordered two anyway. They fit right out of the package, functioned flawless and last shot hold open worked on both. I will be picking up more next pay day. I can't speak for every model 9mm 1911 but my Springfield armory loved them. Great product gentlemen! :)

slight problem releasing (23/03/2014)

i bought 3 of these for my RIA 1911. when i first used them they wouldn't drop free when released. i found that they bound slightly against the release button, so i tapped the throat with a plastic mallet to remove a slight flare and they work perfectly now.

For Colt Series 70 -- Works Nice (01/06/2014)

My father gave me his 1911 Colt MK IV / Series 70 Government Model 9mm and I wanted to start shooting it, but I needed magazines as it came with only one. I looked high and low and found these. I bought 15 and the range time is great. Not Colt brand, but work nice. Now if only I could finjd some power to reload.

Does not fit a bumper pad (31/10/2017)

Bought two blued magazines for my new Springfield Range Officer 9mm along with bumper pads to help with proper magazine seating in competition shooting. The two holes on the removable base of the magazine are not in the same location to allow the bumper pad to fit with the bottom. The holes are drilled 1/8" too far forward. In addition, the bottom plate is not completely flat so the bumper pad does not fit solidly when screwed on.

The standard 1911 mags for the Springfield fit the bumper pad fine. The MetalForm magazine holes need to be re-drilled in the proper location in the bottom plate for a proper fit. The removal of the bottom plate for cleaning is also a definate challenge, as the parts do not fit well together with the spring base plate.

I will be attempting to return them to Brownell's without even trying them with my Springfield.

<img width="500" src='/userdocs/reviewimages/49263e6d-2e77-409f-ac68-070ae66141a3.jpg' alt=''>

Leer 26 mas calificaciones en brownells.com

49.9 69.9 3 EUR

N.º de producto: 620009082
METALFORM 9MM GOVT/COMM S/S 9 RD. FLAT FOLLOWER W/REMOVABLE BASE
Ref Fabricante: 9773 Robustos cargadores de alta calidad fabricados en EE. UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para garantizar una alimentación positiva del último cartucho con todos los tipos de balas, incluidos los wadcutters. El seguidor de nailon naranja de seguridad es cóncavo para contener una ronda adicional. Extraíble – La placa de acero se desprende para una limpieza interna fácil del cargador; también acepta almohadillas de tope.

49.9 EUR 50 49,90 € *

Plazo de entrega de aproximadamente 14-21 días.
Más de 10 pcs. en almacén de EE.UU.

Caracteristicas: Acabado: Silver Capacidad: 9-Round Cartucho: 9 mm Luger Hacer: 1911 Material: Stainless Steel Modelo: Government, Commander Cantidad: 1

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Cargadores robustos de alta calidad fabricados en EE. UU. en acero inoxidable, diseñados para pistolas 1911 Auto en calibre 9 mm Luger.
Disponible con seguidores de acero redondos o planos, y seguidor de nailon naranja de seguridad cóncavo para contener una ronda adicional.
Placa de acero extraíble para facilitar la limpieza interna del cargador y aceptar almohadillas de tope.

Atributos

Acabado: Silver Capacidad: 9-Round Cartucho: 9 mm Luger Hacer: 1911 Material: Stainless Steel Modelo: Commander,Government Peso de entrega: 0,068kg Altura de envío: 10mm Ancho de envío: 51mm Longitud de envío: 152mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

N.º de producto: 620009081
METALFORM 9MM GOVT/COMM BLUE 9 RD. FLAT FOLLOWER W/REMOVABLE BASE
Ref Fabricante: 9273 Robustos cargadores de alta calidad fabricados en EE. UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para garantizar una alimentación positiva del último cartucho con todos los tipos de balas, incluidos los wadcutters. El seguidor de nailon naranja de seguridad es cóncavo para contener una ronda adicional. Extraíble – La placa de acero se desprende para una limpieza interna fácil del cargador; también acepta almohadillas de tope.

59.9 EUR 0 59,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Acabado: Black Capacidad: 9-Round Cartucho: 9 mm Luger Hacer: 1911 Material: Steel Modelo: Government, Commander Cantidad: 1

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

N.º de producto: 620000013
METALFORM 9MM GOVT/COMM S/S 10 RD. FLAT FOLLOWER W/ REMOVABLE BASE
Ref Fabricante: 9743 Robustos cargadores de alta calidad fabricados en EE. UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para garantizar una alimentación positiva del último cartucho con todos los tipos de balas, incluidos los wadcutters. El seguidor de nailon naranja de seguridad es cóncavo para contener una ronda adicional. Extraíble – La placa de acero se desprende para una limpieza interna fácil del cargador; también acepta almohadillas de tope.

69.9 EUR 0 69,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Acabado: Silver Capacidad: 10-Round Cartucho: 9 mm Luger Hacer: 1911 Material: Stainless Steel Modelo: Government, Commander Cantidad: 1

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Descubre los cargadores 1911 9MM de METALFORM. Fabricados en acero inoxidable, capacidad de 9 rondas y base removible para fácil limpieza. ¡Compra ahora! 🔫✨

Traditional & Increased-Capacity Magazines For 1911 Colts, Copies & Compacts

Más...

Cargadores Tradicionales y de Alta Capacidad Para Pistolas 1911 Colts, Réplicas y Compactas

Más...

Evaluaciones de clientes para METALFORM 9MM GOVT/COMM S/S 9 RD. FLAT FOLLOWER W/REMOVABLE BASE

Número de evaluaciones: 26
De brownells.com: 26
Evaluación media: 3,8

i need more of these (18/08/2009)

i got one of these to try and it has never missed a beat in my caspian slide/frame and Kart barrelled IDPA gun....i'm getting two more today......[*]

Go Bang every time. (26/11/2009)

best 9mm mag there is! (11/01/2010)

Have tried many but this is the best. Loads all 10 rounds easily and the bullets never "nose dive" causing a jam. Will order 2 more now!

Excellent Product (28/01/2010)

Flawless (31/01/2012)

Great mag for the $$ (06/03/2012)

Surprised by these inexpensive mags. Not a single feed issue.
They are a bit hard on the fingers after feeding several mags.
The base pad is perfect for magwells.

Great Magazine, Will be buying more. (11/03/2012)

These magazines are great. Quality construction. i would buy again and again.

Disappointing magazine for a Dan Wesson (18/05/2012)

Tight fit in a Springfield Armory (24/04/2013)

Great mazazines (27/04/2013)

ORDER WILSON COMBAT (12/08/2013)

NONE of these dropped from from the gun when released. One had to be forced INTO position. Unfortunately, becuase otherwise the materials and construction are solid.

Poor Fit (26/04/2014)

Great Magazine !!!! (15/06/2015)

Built a Custom 1911 in 9mm for myself and these magazines function and fit perfect. Not much to say these mags work.

Will be buying more!!!!

Great product (03/01/2016)

This magazine works flawlessly in my Colt 9mm XSE. Very easy to load all 10 rounds in this magazine (even the 10th round!). I have not experienced any misfeeds, or any malfunctions of any type.

Generally fails to lock SA RO Champion (17/02/2016)

Great Performance, better than stock mag (09/08/2014)

Perfect for my PARA 9mm (16/03/2015)

Oustanding performance (15/03/2017)

I bought three for my Taurus 1911 9mm and after +600 rounds... the performance was excellent.

Best regards

I would buy this magazine again (07/02/2011)

Great replacement mag (11/10/2012)

metalform 1911 magazine 9mm (28/01/2013)

Bought 6 of these for my 1911 Les Baer. NONE of them function in my gun. Springs are to weak to eject from gun. Garbage!!!

Poor magazine (17/06/2013)

I will buy more of these!!! :) (19/09/2013)

slight problem releasing (23/03/2014)

For Colt Series 70 -- Works Nice (01/06/2014)

Does not fit a bumper pad (31/10/2017)

Leer 26 mas calificaciones en brownells.com

Los clientes compraron
Alternativas

MTM CASE-GARD FLIP TOP PISTOL AMMO BOX 9MM-380 ACP 100 ROUND BLUE
FLIP TOP PISTOL AMMO BOXES

MTM CASE-GARD

En stock

11,90 € * 11,90 € - 13,90 €*

Cajas de municion arma larga

WILSON COMBAT 1911 OVERSIZED MAGAZINE RELEASE, SS
1911 OVERSIZED MAGAZINE RELEASE

WILSON COMBAT

Reordenado

79,90 € *

Magazine Releases

4,7

BROWNELLS 22 CALIBER DOUBLE-TUFF BRONZE RIFLE BRUSH 3 PACK
DOUBLE-TUFF™ BORE BRUSH

BROWNELLS

En stock

19,90 € * 16,90 € - 64,90 €*

Gratas

4,5

CARLSONS TRU-CHOKE THINWALL 12GA EXTRA FULL SS
12GAUGE TRU-CHOKE THINWALL CHOKE TUBES

CARLSONS

En stock

35,90 € * 35,90 € - 42,90 €*

Choke Tubes

ISMI 18 LB. S/S RECOIL SPRING
1911 GOVERNMENT RECOIL SPRINGS

ISMI

Reordenado

28,90 € *

Recoil Springs

3,3

METALFORM 9MM GOVT/COMM BLUE 9 RD. FLAT FOLLOWER W/REMOVABLE BASE
1911 9MM MAGAZINES

METALFORM

Reordenado

59,90 € * 49,90 € - 69,90 €*

Cargadores

3,8

METALFORM STANDARD MAG
1911 SPRINGFIELD STYLE 9RD 9MM MAGAZINES

METALFORM

En stock

41,90 € * 41,90 € - 59,90 €*

Cargadores

3,5

COLT 1911 9MM GOVERNMENT SS MAGAZINE ASSEMBLY
1911 9RD 9MM MAGAZINES

COLT

Reordenado

69,90 € *

Cargadores

CHECK-MATE INDUSTRIES 9MM MAGAZINE, 9-RD
1911 9RD 9MM MAGAZINES

CHECK-MATE INDUSTRIES

Reordenado

42,90 € *

Cargadores

Identificarse

¿Ha olvidado su contraseña?
Registrarse

Todos los productos de nuestra web estan en el almacen de Brownells USA, dependiendo del dia de la semana que haga el pedido este puede tardar en llegar entre 15 y 20 dias, nosotros nos encargamos de traer estos productos desde USA y de toda la documentación necesaria para la importacion (transportes, Dua, licencias de importacion y todo el papeleo necesario) los precios llevan incluido los gastos de transporte, aduanas y demas gastos que puedan generar los envios, solamente se les cobrara los gastos de envio desde nuestro almacen a su domicilio.

Redes Sociales

Navegacion

Categorias

Ordering

Servicio al cliente

¡Bienvenido!

Bienvenido a Brownells, la principal Armeria de accesorios de armas de fuego, piezas de armas y herramientas para armeros en España. En nuestra web podrá encontrar todo tipo de accesorios y repuestos para sus rifles, carabinas, escopetas o armas cortas. Si le gusta la caza o el tiro de precisión esta es su web.

La promesa de Brownells España

La promesa Brownells para nuestros clientes: TU SATISFACIÓN ESTÁ GARANTIZADA. Si por cualquier motivo no estás 100% satisfecho con cualquiera de los productos comprados a nosotros, se lo devolvemos o cambiamos.

Nuestra oferta

Si te gusta disparar, trabajar con armas como negocio o hobby, o simplemente poseer un arma, este es tu lugar. Durante más de 75 años, tiradores, armeros profesionales, aficionados, cuerpos de defensa y especialistas en armas han venido a Brownells.es por la alta calidad en sus piezas de armas y en los repuestos que ellos necesitan.

Encontrarás más de 90,000 incluyendo exclusivas piezas de armas, accesorios, herramientas para armeros, munición y otros productos para el manteniminto, reparación y mejora de tus pistolas.

Su equipo Brownells España

Armeria A. Izquierdo (B-13309356)