Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

DOUBLE STAR
AR-15/M16 CHARGING HANDLE

841348103851 100004996

Slick Teflon~ Finish For Ultra-Smooth Operation

Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 67⁄8" (17.5cm) long. Fits mil-spec AR-15/M16 upper receivers.

Más...

Acabado Teflon~ para una Operación Ultra-Suave

Cicla cargas con facilidad utilizando este ensamblaje de palanca de carga estilo militar, completo y listo para instalar en cualquier receptor superior de especificaciones militares. Mecanizado con precisión a partir de aluminio 6061 T6, robusto y a la vez ligero, luego anodizado duro para una superficie resistente al desgaste que añade resistencia. Un recubrimiento final de Teflon® proporciona un acabado autolubricante y suave para una operación excepcionalmente fluida.

ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. 67⁄8" (17.5cm) de largo. Compatible con receptores superiores AR-15/M16 de especificaciones militares.

Más...

Evaluaciones de clientes para DOUBLE STAR CHARGING HANDLE ASSEMBLY

Número de evaluaciones: 12
De brownells.com: 12
Evaluación media: 1,8

you get what you pay for (27/08/2010)

i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it

Good price (19/04/2011)

It does the job and for a great price

Nice charging handle (12/05/2011)

Fit is good. Love the Double Star logo. A great value.

Too flexible (18/10/2013)

This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.

low quality control (02/11/2013)

Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...

Not compatible (21/11/2013)

This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.

no problems (25/01/2014)

a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues

not so hot (01/12/2014)

This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.

Get one that is made of 7075 aluminum.

It came as part of a kit, but I'll try to return it.

Buyer Beware! (18/06/2016)

Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.

[CAUTION] (01/09/2016)

Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.

Pure Junk (03/12/2016)

I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.

Binding up from the start (21/02/2017)

Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.

Leer 12 mas calificaciones en brownells.com

49.9 49.9 1 EUR

N.º de producto: 100004996
DOUBLE STAR CHARGING HANDLE ASSEMBLY
Ref Fabricante: AR460 841348103851 Cicla cargas con facilidad utilizando este ensamblaje de palanca de carga estilo militar, completo y listo para instalar en cualquier receptor superior de especificaciones militares. Mecanizado con precisión a partir de aluminio 6061 T6, robusto y a la vez ligero, luego anodizado duro para una superficie resistente al desgaste que añade resistencia. Un recubrimiento final de Teflon® proporciona un acabado autolubricante y suave para una operación excepcionalmente fluida.

49.9 EUR 0 49,90 € *

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Acabado: Matte Black Hacer: AR-15 Mano: Right

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Ensamblaje de palanca de carga estilo militar, listo para instalar en receptores superiores AR-15/M16 de especificaciones militares.
Mecanizado a partir de aluminio 6061 T6, anodizado duro y recubierto con Teflon® para una operación suave y resistente al desgaste.
Diseño robusto y ligero con acabado negro mate, compatible con mano derecha.

Atributos

Acabado: Matte Black Hacer: AR-15 Mano: Right Peso de entrega: 0,068kg Altura de envío: 38mm Ancho de envío: 124mm Longitud de envío: 251mm UPC : 841348103851

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Mejora tu AR-15 con el ensamblaje de palanca de carga DOUBLE STAR. 💪 Aluminio 6061 T6, acabado suave y resistente. ¡Instalación fácil!

Slick Teflon~ Finish For Ultra-Smooth Operation

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. 67⁄8" (17.5cm) long. Fits mil-spec AR-15/M16 upper receivers.

Más...

Acabado Teflon~ para una Operación Ultra-Suave

ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. 67⁄8" (17.5cm) de largo. Compatible con receptores superiores AR-15/M16 de especificaciones militares.

Más...

Evaluaciones de clientes para DOUBLE STAR CHARGING HANDLE ASSEMBLY

Número de evaluaciones: 12
De brownells.com: 12
Evaluación media: 1,8

you get what you pay for (27/08/2010)

Good price (19/04/2011)

It does the job and for a great price

Nice charging handle (12/05/2011)

Fit is good. Love the Double Star logo. A great value.

Too flexible (18/10/2013)

low quality control (02/11/2013)

Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...

Not compatible (21/11/2013)

no problems (25/01/2014)

a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues

not so hot (01/12/2014)

Buyer Beware! (18/06/2016)

[CAUTION] (01/09/2016)

Pure Junk (03/12/2016)

Binding up from the start (21/02/2017)

Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.

Leer 12 mas calificaciones en brownells.com