MARBLE ARMS
RIFLE SHORT BULLSEYE REAR SIGHT

871373003987 579000163

For Fast Target Acquisition & Improved Accuracy

Barrel-mounted, dovetail Bullseye sight gets you on target fast with perfect alignment for improved accuracy. Steel, double-ring peep design ensures consistent sight alignment and helps improve shooting form. The moment the rear sight is misaligned, the front sight drifts out of the center ring, telling the shooter to re-align. Replaces standard 3⁄8" dovetail rear sights on many rifles. For use with bead-type or traditional blade front sights. Adjustable models are available with a short or long base and six-position step elevator that’s adjustable in .030" increments for precise elevation settings.

SPECS: Steel, blue, polished finish. Fits nominal 3⁄8" (9.5mm) dovetail. Outside Ring O.D. - 9⁄16" (1.4cm). Inside Ring I.D. - .15” (3.8mm). Adjustable - .338”-.535” (8.6mm - 13.5mm) elevation adjustment in six, .030” (.76mm) increments. OAL from rear of dovetail - Long: 2½” (6.3cm). Short - 1½” (3.8cm). Elevator is included.

Más...

Para Adquisición Rápida del Objetivo y Mayor Precisión

Mira Bullseye montada en el cañón y con cola de milano que te permite apuntar rápidamente con una alineación perfecta para mejorar la precisión. Acero, diseño de doble anillo tipo peep que asegura una alineación constante de la mira y ayuda a mejorar la forma de disparo. En el momento en que la mira trasera se desalinea, la mira delantera se sale del anillo central, indicándole al tirador que debe realinear. Reemplaza las miras traseras de cola de milano estándar de 3⁄8" en muchos rifles. Para su uso con miras delanteras tipo bead o tradicionales de hoja. Los modelos ajustables están disponibles con una base corta o larga y un elevador de seis posiciones ajustable en incrementos de .030" para configuraciones de elevación precisas.

ESPECIFICACIONES: Acero, acabado pulido azul. Se ajusta a cola de milano nominal de 3⁄8" (9.5mm). Diámetro exterior del anillo - 9⁄16" (1.4cm). Diámetro interior del anillo - .15” (3.8mm). Ajustable - .338”-.535” (8.6mm - 13.5mm) ajuste de elevación en seis incrementos de .030” (.76mm). Largo total desde la parte trasera de la cola de milano - Largo: 2½” (6.3cm). Corto - 1½” (3.8cm). Incluye elevador.

Más...

Evaluaciones de clientes para MARBLE ARMS RIFLE ADJUSTABLE PEEP SHORT BULLSEYE REAR SIGHT BLACK

Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,8

Works for me! (13/02/2010)

I mounted the short bulls eye sight on my Marlin 60 [the long sight *will* also work for the 60] because my eyes don't work so great anymore with the typical factory open sights. I had also replaced the front sight with a fiber optic sight. I found that I can shoot slightly tighter groups with the factory blade sight, but I come on target much faster with this sight (I had to really work for the tighter groups with the factory open sight). I will probably keep this sight on my rifle. Installation was easy: the sight only needed a few passes with a triangle file to fit in the 3/8" dovetail slot. It seems rugged and well made with a nice blued finish. My sight had some ripples on the rings, like something dragged across the metal before the sight was finished, but I don't notice the ripples in use. I stands pretty tall from the barrel (about 3/4" above the barrel on the lowest setting), so this *might* be an issue to look at if you scope your rifle. While not the most precise sighting system for alignment, it gives a fast sight picture and is suprisingly usable even in low light. I'm satisfied with what it does, I'm happy with its construction, I'm *very* happy with the price, and I'll be buying another one (the fixed one) for my Ruger 10/22.

Great addition to the Henry H001 .22LR (21/02/2011)

I was looking for a sight that my middle age eyes could tolerate and be comfortable with. I installed this bullseye and my accuracy improved trifold. Easy to see and quick to get on target. Do yourself a favor and buy this sight! The short version is the one you want for the Henry rifles. I might add that it really improves the appearance of the rifle as I have many peiople at the range asking about it. Minor fitting may be required but just slightly, if any.

Worked well on Remington 514Y (20/12/2012)

I replaced the stock sheet metal sight on this rifle. Installation was fairly simple, but did require a lot of filing. Thank goodness it shot just a touch high at 25 yards, since you can't lower impact. I needed just a couple of taps to get windage right on target. I shot several groups under a dime with this. Not bad for an old guy with bad eyes.

This sight is well worth the money! (02/10/2018)

My Model 94 32 spl carbine was assembled during the lost period of '42-'46; barrel was made in '38 and dovetailed for the short spring buckhorn, but it was assembled with a long spring buckhorn that we could never keep together with the ramp: the thumb beavertail had to be cut off to get the sight to work at all. When I found this short bulls-eye and discovered that it would work on my gun, I ordered it. I chose 'slow-boat' mail shipping (cheapest), but it still took only 5 days. It installed easily, if with a bit of barrel scarring from a sight pusher that didn't work perfectly with the tapered Winchester barrel. I like the look and I especially like that the (included) ramp is "trapped" and can't get lost. Laser bore sighting indicates that the gun will be easier to get shooting close. It was almost impossible with the long spring sight. Considering that I've never taken a shot further away than about 170 yards, this bulls-eye sight should be a BUNCH easier to hunt with!

Leer 4 mas calificaciones en brownells.com

42.9 42.9 1 EUR

N.º de producto: 579000163
MARBLE ARMS RIFLE ADJUSTABLE PEEP SHORT BULLSEYE REAR SIGHT BLACK
Ref Fabricante: 006950 871373003987 Mira Bullseye montada en el cañón y con cola de milano que te permite apuntar rápidamente con una alineación perfecta para mejorar la precisión. Acero, diseño de doble anillo tipo peep que asegura una alineación constante de la mira y ayuda a mejorar la forma de disparo. En el momento en que la mira trasera se desalinea, la mira delantera se sale del anillo central, indicándole al tirador que debe realinear. Reemplaza las miras traseras de cola de milano estándar de 3⁄8" en muchos rifles. Para su uso con miras delanteras tipo bead o tradicionales de hoja. Los modelos ajustables están disponibles con una base corta o larga y un elevador de seis posiciones ajustable en incrementos de .030" para configuraciones de elevación precisas.

42.9 EUR 13 42,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Ajustable, Peep Hacer: Universal Rifles

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

La mira Bullseye de Marble Arms se monta en el cañón y se ajusta a la cola de milano estándar de 3⁄8", mejorando la precisión y alineación del disparo.
El diseño de doble anillo tipo peep asegura una alineación constante y ayuda a perfeccionar la forma de disparo, notificando al tirador si la mira delantera se desalinea.
Incluye un elevador ajustable en seis posiciones con incrementos de .030", permitiendo configuraciones de elevación precisas para diferentes rifles universales.

Atributos

Color: Black Estilo: Ajustable,Peep Hacer: Universal Rifles Peso de entrega: 0,005kg Altura de envío: 1mm Ancho de envío: 83mm Longitud de envío: 146mm UPC : 871373003987