Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94’s with rear sight dovetail 4" forward of receiver. a
SPECS: Aluminum, black, matte finish. 8" (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.
Más...
Monta el Visor Sobre el Cañón para un Apuntado Rápido
Montura ligera al estilo Weaver que posiciona un visor de alivio ocular extendido delante del receptor para un apuntado rápido y con ambos ojos abiertos. La base al estilo Weaver cuenta con múltiples ranuras transversales para acoplar una amplia gama de visores electrónicos y ópticos. Se monta en los agujeros existentes y en la cola de milano de la mira trasera. Se ajusta de manera baja para permitir el uso de miras de hierro sin necesidad de retirar la montura. No requiere modificaciones en el rifle. Modelos Marlin disponibles para Guide Gun 1895, 1894 y rifles 336. Winchester es compatible con los Model 94 con cola de milano de la mira trasera 4" adelante del receptor. a
ESPECIFICACIONES: Aluminio, negro, acabado mate. 8" (20.3 cm) de largo. Incluye instrucciones, punzón de plástico, llave hexagonal y Loctite. Winchester también incluye compuesto de acoplamiento.
Más...
Evaluaciones de clientes para XS SIGHT SYSTEMS MARLIN 1895 SCOUT MOUNT
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,4
Deceptive product description(10/08/2013)
This mount will not fit a pre-64 M94. The description only says the rear sight dovetail must be 4" from the receiver. That's where the old M94 dovetail is, but the description doesn't mention the rear of the mount is attached to the receiver ring with screws. Only newer AE models have a factory drillled & tapped receiver ring. Also, the mount is designed to be permanently attached to the barrel with epoxy. There is no mention of thiis in the description. This is definetly not suitable for a collectible M94. The description should indicate the oinstallation is permanent and requires threaded mopunting holes in the receiver ring.
Scout Mounts are Great(05/12/2009)
I have mounted these on rifles for use of scopes and red dot sights. The ease of use and balance to the weapon makes it very fast, handy, and accurate.
Weaver spec recoil grooves :((02/01/2012)
Well built rail, that is easy to install. Be aware that the recoil grooves are weaver spec and quick detach mounts that are picatinny spec will not work (i.e. ADM T1-L).
To many variables, cause poor fitting(19/03/2014)
No one tells you how many variables need to be perfect for this to work. I hade to remove with a dremel over a 16th of metal from the barrel mount hole. After all that fitting and installation the hole mount was canted to the left with nothing that could be done to correct it
Mounted on Marlin 336BL(08/03/2016)
I put the scope mount on my Marlin 336BL. Yes, as other reviews state, it does require a degree of fitting. It even says that may be required in the instructions. In any event, I was able to mate the pillar block and the mount to the receiver in about 30-40 minutes. After that, the rest was simple to install with the supplied hardware. Looks good and is very solid at this point. In my opinion, I would rather fit the mount than it be oversize or out of spec in some other way to ensure it fits a variety of different guns without alteration...kind of like having it custom fit for my gun.
I would buy this product again and again(23/04/2010)
Simply perfect.
XS Scout Mount Marlin 1894 44 Mag. S/S(29/07/2011)
This mount is a Very GOOD" set up for this type rifle . The back of the Scope mount`s far enough forward so you can operate the hammer without the scope over the top of the hammer. The scope is far enough forward , where it won`t bust your eye from muzzel blast. it mount`s your scope Very low close to the barrel where it should be on this rifle. Mine is set up with a 2X7X28 MM scope , an Exlent Set Up on this 44 mag rifle for 100 too 200 yd. uses . The Con`s "... I Had to do a LOT" of grinding on the bottom of the mount with a Dremal tool to get the mount to fit right without Flexing when you tork the dang thing down , but FINELY" got it to fix Great" after about 3 hour`s work on it. That part NOT" , fun , but beside`s the extra work on the mount it`s self , it`s a Beautiful set up on the little 44 rifle and work`s Extreamley well with my scope set up. I Still give it 5 stars . My gun shoot`s Pretty Small Groups at 100 yds. now and 5 inch groups at 200 yds. I Love The XS Mount system on this rifle , It IS" , One Fine Set Up On the Rifle !
Excellent overall(14/06/2015)
Comes with everything you'll need and then some. They include a hard plastic punch for removing the dovetail sight. Mine came out with only a few light taps. They also include about 10x more threadlock than you actually need, and more is most always better. Mounting process is very simple and good instructions are included. Installation took all of ~10 minutes for me with only a light sanding of the bottom of the pillar block to fit in the dovetail slot. Now the 1 star off things are small, but somewhat relevant. The etched lettering on the side is fairly blurry, and I don't like that they smacked the patent number right on the side and still blurry. Also, the bolts don't line up with each other at all when torqued. Again that's small and insignificant overall, but I feel it would look much better if the flat head slots lined up. Besides that it is completely solid, and very easy to install.
Warning!(15/06/2010)
Warning! Will not fit octagon barreled cowboy guns. This should be made known in advance but it is not. Otherwise they work good but are made of soft aluminum and marr up real easy.
What a let down..(06/11/2014)
Received the scout mount for my brand new Marlin 1895G 45-70 and found the rail section to be of such poor quality and lightweight construction that it was curved along its length with a slight warp. The scope sits angled on the mount, regardless of the adjustments made at the dovetail left and right. XS has really dropped the ball with their QC process. Additionally, the screws and dovetail bolt are cheap aluminum that you'll be lucky to mount without damaging. I would have paid quite a bit more for a quality mount instead of this cheap piece of junk.
N.º de producto: 006000020 XS SIGHT SYSTEMS MARLIN 1895 SCOUT MOUNT Ref Fabricante: ML-6000R-N647533042482 Montura ligera al estilo Weaver que posiciona un visor de alivio ocular extendido delante del receptor para un apuntado rápido y con ambos ojos abiertos. La base al estilo Weaver cuenta con múltiples ranuras transversales para acoplar una amplia gama de visores electrónicos y ópticos. Se monta en los agujeros existentes y en la cola de milano de la mira trasera. Se ajusta de manera baja para permitir el uso de miras de hierro sin necesidad de retirar la montura. No requiere modificaciones en el rifle. Modelos Marlin disponibles para Guide Gun 1895, 1894 y rifles 336. Winchester es compatible con los Model 94 con cola de milano de la mira trasera 4" adelante del receptor. a
114.9EUR0114,90 €
*
No disponible.
Caracteristicas:Color: Matte BlackEstilo: WeaverHacer: MarlinMaterial: AluminioModelo: 1895Numero de bases: 1-Piece
Montura ligera estilo Weaver para visores de alivio ocular extendido, permitiendo apuntado rápido con ambos ojos abiertos.
Compatible con rifles Marlin 1895 Guide Gun, 1894 y 336, y modelos Winchester 94 con cola de milano del alza trasera a 4" delante del receptor.
Fabricada en aluminio con acabado mate negro, incluye instrucciones, punzón de plástico, llave hexagonal y Loctite.
Atributos
Color:
Matte Black
Estilo:
Weaver
Hacer:
Marlin
Material:
Aluminio
Modelo:
1895
Numero de bases:
1-Piece
Peso de entrega: 0,113kgAltura de envío: 30mmAncho de envío: 130mmLongitud de envío: 239mm
UPC
: 647533042482
Detalles del artículo
Hecho en USA
N.º de producto: 006000035 XS SIGHT SYSTEMS WINCHESTER 94 SCOUT MOUNT Ref Fabricante: WI-6000R-N647533042512 Montura ligera al estilo Weaver que posiciona un visor de alivio ocular extendido delante del receptor para un apuntado rápido y con ambos ojos abiertos. La base al estilo Weaver cuenta con múltiples ranuras transversales para acoplar una amplia gama de visores electrónicos y ópticos. Se monta en los agujeros existentes y en la cola de milano de la mira trasera. Se ajusta de manera baja para permitir el uso de miras de hierro sin necesidad de retirar la montura. No requiere modificaciones en el rifle. Modelos Marlin disponibles para Guide Gun 1895, 1894 y rifles 336. Winchester es compatible con los Model 94 con cola de milano de la mira trasera 4" adelante del receptor. a
124.9EUR0124,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas:Color: Matte BlackEstilo: WeaverHacer: WinchesterMaterial: AluminioModelo: 94Numero de bases: 1-Piece
Montura ligera estilo Weaver que permite un apuntado rápido con ambos ojos abiertos, compatible con visores electrónicos y ópticos.
Se monta en los agujeros existentes y permite el uso de miras de hierro sin retirar la montura, sin necesidad de modificar el rifle.
Especificaciones: Aluminio, negro, acabado mate, 8" de largo, incluye instrucciones, punzón de plástico, llave hexagonal y Loctite.
Atributos
Color:
Matte Black
Estilo:
Weaver
Hacer:
Winchester
Material:
Aluminio
Modelo:
94
Numero de bases:
1-Piece
Peso de entrega: 0,227kgAltura de envío: 36mmAncho de envío: 132mmLongitud de envío: 251mm
UPC
: 647533042512
Detalles del artículo
Hecho en USA
N.º de producto: 006000031 XS SIGHT SYSTEMS MARLIN 1894 SCOUT MOUNT Ref Fabricante: ML-6002R-N647533042505 Montura ligera al estilo Weaver que posiciona un visor de alivio ocular extendido delante del receptor para un apuntado rápido y con ambos ojos abiertos. La base al estilo Weaver cuenta con múltiples ranuras transversales para acoplar una amplia gama de visores electrónicos y ópticos. Se monta en los agujeros existentes y en la cola de milano de la mira trasera. Se ajusta de manera baja para permitir el uso de miras de hierro sin necesidad de retirar la montura. No requiere modificaciones en el rifle. Modelos Marlin disponibles para Guide Gun 1895, 1894 y rifles 336. Winchester es compatible con los Model 94 con cola de milano de la mira trasera 4" adelante del receptor. a
124.9EUR0124,90 €
*
No disponible.
Caracteristicas:Color: Matte BlackEstilo: WeaverHacer: MarlinMaterial: AluminioModelo: 1894Numero de bases: 1-Piece
Montura ligera estilo Weaver para visores de alivio ocular extendido, permitiendo apuntar con ambos ojos abiertos.
Compatible con rifles Marlin 1895 Guide Gun, 1894 y 336, así como con Winchester 94 con cola de milano del alza trasera a 4" del receptor.
Fabricada en aluminio con acabado mate negro, incluye instrucciones, punzón de plástico, llave hexagonal y Loctite.
Atributos
Color:
Matte Black
Estilo:
Weaver
Hacer:
Marlin
Material:
Aluminio
Modelo:
1894
Numero de bases:
1-Piece
Peso de entrega: 0,136kgAltura de envío: 25mmAncho de envío: 130mmLongitud de envío: 234mm
UPC
: 647533042505
Detalles del artículo
Hecho en USA
N.º de producto: 006000032 XS SIGHT SYSTEMS MARLIN 336 SCOUT MOUNT Ref Fabricante: ML-6001R-N647533042499 Montura ligera al estilo Weaver que posiciona un visor de alivio ocular extendido delante del receptor para un apuntado rápido y con ambos ojos abiertos. La base al estilo Weaver cuenta con múltiples ranuras transversales para acoplar una amplia gama de visores electrónicos y ópticos. Se monta en los agujeros existentes y en la cola de milano de la mira trasera. Se ajusta de manera baja para permitir el uso de miras de hierro sin necesidad de retirar la montura. No requiere modificaciones en el rifle. Modelos Marlin disponibles para Guide Gun 1895, 1894 y rifles 336. Winchester es compatible con los Model 94 con cola de milano de la mira trasera 4" adelante del receptor. a
124.9EUR0124,90 €
*
No disponible.
Caracteristicas:Color: Matte BlackEstilo: WeaverHacer: MarlinMaterial: AluminioModelo: 336Numero de bases: 1-Piece
Montura ligera estilo Weaver para visores de alivio ocular extendido, compatible con rifles Marlin 1895 Guide Gun, 1894 y 336.
Se monta en agujeros existentes y permite el uso de miras de hierro sin retirar la montura, sin necesidad de modificaciones en el rifle.
Incluye accesorios: instrucciones, punzón de plástico, llave hexagonal y Loctite; modelos Winchester incluyen compuesto de ajuste.
Atributos
Color:
Matte Black
Estilo:
Weaver
Hacer:
Marlin
Material:
Aluminio
Modelo:
336
Numero de bases:
1-Piece
Peso de entrega: 0,159kgAltura de envío: 25mmAncho de envío: 130mmLongitud de envío: 239mm
UPC
: 647533042499
Detalles del artículo
Hecho en USA
Descubre la Montura Scout XS para Marlin 1895. Ideal para un apuntado rápido con ambos ojos abiertos. 🏹 Compatible y fácil de instalar.
Lightweight, Weaver-style mount positions an extended eye relief scope forward of the receiver for quick, both-eyes-open sighting. Weaver-style base features multiple cross slots for attaching a wide range of electronic and optical sights. Mounts to existing holes and rear sight dovetail. Sets low to allow use of iron sights without removing mount. Requires no modifications to rifle. Marlin models available for 1895 Guide Gun, 1894 and 336 rifles. Winchester fits Model 94’s with rear sight dovetail 4" forward of receiver. a
SPECS: Aluminum, black, matte finish. 8" (20.3cm) long. Includes instructions, plastic punch, hex wrench and Loctite. Winchester also includes bedding compound.
Más...
Monta el Visor Sobre el Cañón para un Apuntado Rápido
Montura ligera al estilo Weaver que posiciona un visor de alivio ocular extendido delante del receptor para un apuntado rápido y con ambos ojos abiertos. La base al estilo Weaver cuenta con múltiples ranuras transversales para acoplar una amplia gama de visores electrónicos y ópticos. Se monta en los agujeros existentes y en la cola de milano de la mira trasera. Se ajusta de manera baja para permitir el uso de miras de hierro sin necesidad de retirar la montura. No requiere modificaciones en el rifle. Modelos Marlin disponibles para Guide Gun 1895, 1894 y rifles 336. Winchester es compatible con los Model 94 con cola de milano de la mira trasera 4" adelante del receptor. a
ESPECIFICACIONES: Aluminio, negro, acabado mate. 8" (20.3 cm) de largo. Incluye instrucciones, punzón de plástico, llave hexagonal y Loctite. Winchester también incluye compuesto de acoplamiento.
Más...
Evaluaciones de clientes para XS SIGHT SYSTEMS MARLIN 1895 SCOUT MOUNT
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,4
Deceptive product description(10/08/2013)
This mount will not fit a pre-64 M94. The description only says the rear sight dovetail must be 4" from the receiver. That's where the old M94 dovetail is, but the description doesn't mention the rear of the mount is attached to the receiver ring with screws. Only newer AE models have a factory drillled & tapped receiver ring. Also, the mount is designed to be permanently attached to the barrel with epoxy. There is no mention of thiis in the description. This is definetly not suitable for a collectible M94. The description should indicate the oinstallation is permanent and requires threaded mopunting holes in the receiver ring.
Scout Mounts are Great(05/12/2009)
I have mounted these on rifles for use of scopes and red dot sights. The ease of use and balance to the weapon makes it very fast, handy, and accurate.
Weaver spec recoil grooves :((02/01/2012)
Well built rail, that is easy to install. Be aware that the recoil grooves are weaver spec and quick detach mounts that are picatinny spec will not work (i.e. ADM T1-L).
To many variables, cause poor fitting(19/03/2014)
No one tells you how many variables need to be perfect for this to work. I hade to remove with a dremel over a 16th of metal from the barrel mount hole. After all that fitting and installation the hole mount was canted to the left with nothing that could be done to correct it
Mounted on Marlin 336BL(08/03/2016)
I put the scope mount on my Marlin 336BL. Yes, as other reviews state, it does require a degree of fitting. It even says that may be required in the instructions. In any event, I was able to mate the pillar block and the mount to the receiver in about 30-40 minutes. After that, the rest was simple to install with the supplied hardware. Looks good and is very solid at this point. In my opinion, I would rather fit the mount than it be oversize or out of spec in some other way to ensure it fits a variety of different guns without alteration...kind of like having it custom fit for my gun.
I would buy this product again and again(23/04/2010)
Simply perfect.
XS Scout Mount Marlin 1894 44 Mag. S/S(29/07/2011)
This mount is a Very GOOD" set up for this type rifle . The back of the Scope mount`s far enough forward so you can operate the hammer without the scope over the top of the hammer. The scope is far enough forward , where it won`t bust your eye from muzzel blast. it mount`s your scope Very low close to the barrel where it should be on this rifle. Mine is set up with a 2X7X28 MM scope , an Exlent Set Up on this 44 mag rifle for 100 too 200 yd. uses . The Con`s "... I Had to do a LOT" of grinding on the bottom of the mount with a Dremal tool to get the mount to fit right without Flexing when you tork the dang thing down , but FINELY" got it to fix Great" after about 3 hour`s work on it. That part NOT" , fun , but beside`s the extra work on the mount it`s self , it`s a Beautiful set up on the little 44 rifle and work`s Extreamley well with my scope set up. I Still give it 5 stars . My gun shoot`s Pretty Small Groups at 100 yds. now and 5 inch groups at 200 yds. I Love The XS Mount system on this rifle , It IS" , One Fine Set Up On the Rifle !
Excellent overall(14/06/2015)
Comes with everything you'll need and then some. They include a hard plastic punch for removing the dovetail sight. Mine came out with only a few light taps. They also include about 10x more threadlock than you actually need, and more is most always better. Mounting process is very simple and good instructions are included. Installation took all of ~10 minutes for me with only a light sanding of the bottom of the pillar block to fit in the dovetail slot. Now the 1 star off things are small, but somewhat relevant. The etched lettering on the side is fairly blurry, and I don't like that they smacked the patent number right on the side and still blurry. Also, the bolts don't line up with each other at all when torqued. Again that's small and insignificant overall, but I feel it would look much better if the flat head slots lined up. Besides that it is completely solid, and very easy to install.
Warning!(15/06/2010)
Warning! Will not fit octagon barreled cowboy guns. This should be made known in advance but it is not. Otherwise they work good but are made of soft aluminum and marr up real easy.
What a let down..(06/11/2014)
Received the scout mount for my brand new Marlin 1895G 45-70 and found the rail section to be of such poor quality and lightweight construction that it was curved along its length with a slight warp. The scope sits angled on the mount, regardless of the adjustments made at the dovetail left and right. XS has really dropped the ball with their QC process. Additionally, the screws and dovetail bolt are cheap aluminum that you'll be lucky to mount without damaging. I would have paid quite a bit more for a quality mount instead of this cheap piece of junk.