Ready-to-drop-in parts put an ultra-smooth, clean breaking, professional quality trigger job in your 1911 Auto in only minutes. Fully prepared hammer and pre-ground, pre-polished sear, plus springs and fully-machined disconnector, will install into most models of 1911 Autos with little or no fitting required. Helps promote better trigger control and improved accuracy. Pro Match - features wire EDM’d hammer and sear that are double heat treated, then finish ground for outstanding durability - 3 1/2 lb. pull weight. Commander Match - Carry Defense Style! A professional 4 lb. trigger pull.
SPECS: Kit includes hammer, sear, sear spring, mainspring (hammer spring) and disconnector. Pro Match - Stainless Steel, Rc 50. Commander Match - Stainless, Machined tool steel hammer, polished sides, Rc 50.
Más...
Un trabajo de gatillo profesional sin el esfuerzo
Piezas listas para instalar que te permiten tener un trabajo de gatillo de calidad profesional, ultra suave y de disparo limpio en tu 1911 Auto en solo minutos. Martillo completamente preparado y fiador pre-lijado, pre-pulido, además de resortes y desconector completamente mecanizado, que se instalarán en la mayoría de los modelos de 1911 Autos con poca o ninguna adaptación necesaria. Ayuda a promover un mejor control del gatillo y una precisión mejorada. Pro Match - cuenta con martillo y fiador cortados por EDM alámbrico que son doblemente tratados térmicamente, luego acabados a muela para una durabilidad excepcional - peso de disparo de 3 1/2 lb. Commander Match - ¡Estilo Defensa Personal! Un peso de disparo de gatillo profesional de 4 lb.
ESPECIFICACIONES: El kit incluye martillo, fiador, resorte del fiador, muelle principal (resorte del martillo) y desconector. Pro Match - Acero inoxidable, Rc 50. Commander Match - Acero inoxidable, martillo de acero mecanizado, lados pulidos, Rc 50.
Más...
Evaluaciones de clientes para NOWLIN COMMANDER MATCH TRIGGER JOB
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4
Would buy again(31/08/2013)
Installed one in my Colt Gov. model last night . Install was easy .Just remember how the old parts came out and put the new ones in the same way . Now the trigger pull is right at 4 pounds and it breaks beautiful . Very happy .
More work than expected(20/05/2011)
The Pro trigger kit did what it claimed. It provided a safe, secure trigger that breaks at 31/2 lbs as advertised. However the trigger hook surfaces were quite rough and needed lots of stoning with a hard Arkansas stone to smooth it out.
This Knowlin kit does the job well(31/05/2011)
I replaced the hammer, sear, sear spring, diconnector, and main spring in my colt XSE. The colt had a 4 1/2 pound trigger pull, and after installation the trigger pull was clean, crisp, 3 1/4 pounds. I have fired about 12000 rounds since the installation and the trigger is still as good as it was upon installation.
well worth it(30/10/2011)
I bought the Nowlin Pro-Match trigger job for my Remington R1 1911. There were a couple of minor issues with the installation. I had to do a bit of filing on the sear to get the thumb safety to slide back in place. Also, The sear spring needed some minor adjustment to get the grip safety to function properly. This was the first 1911 pistol I'd taken apart. It's a bit surprising how small the parts are for a relatively large pistol. If you keep track of all the parts and watch the installation video on the Brownells website, there shouldn't be any problems. The bottom line for me is that the trigger pull on the my R1 is lighter and more consistent now.
The easest way to upgrade your 1911(22/11/2011)
I install this trigger job kit along with the 1911 AUTO ULTRALIGHT MATCH TRIGGER and it took my gun to a whole other level!!! Sweet, crisp and precise gun and really makes a difference at the range.
*** Be careful if you don't have a beaver tail on your 1911 because that will be something you will have to replace too ***
It's nice to buy American made products.(13/12/2011)
The first kit I received had a issue with the hammer. I contacted the company and the President contacted me back and shipped me a replacement which worked flawlessly. Great company/people to work with.
hammer/sear mis-match(06/05/2013)
installed in a caspian .45...hammer notch had only the center 1/3 in contact with full face sear. 1/3 of Rt and left hammer notch was missing. Hammer at full position would lock with sear due to rough interface and deap hammer notch.
N.º de producto: 654012111 NOWLIN COMMANDER MATCH TRIGGER JOB Ref Fabricante: 203C Piezas listas para instalar que te permiten tener un trabajo de gatillo de calidad profesional, ultra suave y de disparo limpio en tu 1911 Auto en solo minutos. Martillo completamente preparado y fiador pre-lijado, pre-pulido, además de resortes y desconector completamente mecanizado, que se instalarán en la mayoría de los modelos de 1911 Autos con poca o ninguna adaptación necesaria. Ayuda a promover un mejor control del gatillo y una precisión mejorada. Pro Match - cuenta con martillo y fiador cortados por EDM alámbrico que son doblemente tratados térmicamente, luego acabados a muela para una durabilidad excepcional - peso de disparo de 3 1/2 lb. Commander Match - ¡Estilo Defensa Personal! Un peso de disparo de gatillo profesional de 4 lb.
269.9EUR0269,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Kit de instalación rápida que mejora el control del gatillo y la precisión de la 1911 Auto, con piezas pre-lijadas y pre-pulidas.
Disponible en dos versiones: Pro Match con un peso de disparo de 3 1/2 lb y Commander Match con un peso de disparo de 4 lb.
Incluye martillo, fiador, resorte del fiador, muelle principal y desconector, todos fabricados en acero inoxidable de alta durabilidad.
Atributos
Peso de entrega: 0,068kgAltura de envío: 8mmAncho de envío: 127mmLongitud de envío: 226mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.c
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 654012110 NOWLIN PRO MATCH TRIGGER JOB Ref Fabricante: 203PRO085382301907 Piezas listas para instalar que te permiten tener un trabajo de gatillo de calidad profesional, ultra suave y de disparo limpio en tu 1911 Auto en solo minutos. Martillo completamente preparado y fiador pre-lijado, pre-pulido, además de resortes y desconector completamente mecanizado, que se instalarán en la mayoría de los modelos de 1911 Autos con poca o ninguna adaptación necesaria. Ayuda a promover un mejor control del gatillo y una precisión mejorada. Pro Match - cuenta con martillo y fiador cortados por EDM alámbrico que son doblemente tratados térmicamente, luego acabados a muela para una durabilidad excepcional - peso de disparo de 3 1/2 lb. Commander Match - ¡Estilo Defensa Personal! Un peso de disparo de gatillo profesional de 4 lb.
254.9EUR0254,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
N.º de producto: 654000062 NOWLIN SPEED DEMON II ACTION KIT-3LB PULL Ref Fabricante: 203SD085382301921 Piezas listas para instalar que te permiten tener un trabajo de gatillo de calidad profesional, ultra suave y de disparo limpio en tu 1911 Auto en solo minutos. Martillo completamente preparado y fiador pre-lijado, pre-pulido, además de resortes y desconector completamente mecanizado, que se instalarán en la mayoría de los modelos de 1911 Autos con poca o ninguna adaptación necesaria. Ayuda a promover un mejor control del gatillo y una precisión mejorada. Pro Match - cuenta con martillo y fiador cortados por EDM alámbrico que son doblemente tratados térmicamente, luego acabados a muela para una durabilidad excepcional - peso de disparo de 3 1/2 lb. Commander Match - ¡Estilo Defensa Personal! Un peso de disparo de gatillo profesional de 4 lb.
284.9EUR0284,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Ready-to-drop-in parts put an ultra-smooth, clean breaking, professional quality trigger job in your 1911 Auto in only minutes. Fully prepared hammer and pre-ground, pre-polished sear, plus springs and fully-machined disconnector, will install into most models of 1911 Autos with little or no fitting required. Helps promote better trigger control and improved accuracy. Pro Match - features wire EDM’d hammer and sear that are double heat treated, then finish ground for outstanding durability - 3 1/2 lb. pull weight. Commander Match - Carry Defense Style! A professional 4 lb. trigger pull.
SPECS: Kit includes hammer, sear, sear spring, mainspring (hammer spring) and disconnector. Pro Match - Stainless Steel, Rc 50. Commander Match - Stainless, Machined tool steel hammer, polished sides, Rc 50.
Más...
Un trabajo de gatillo profesional sin el esfuerzo
Piezas listas para instalar que te permiten tener un trabajo de gatillo de calidad profesional, ultra suave y de disparo limpio en tu 1911 Auto en solo minutos. Martillo completamente preparado y fiador pre-lijado, pre-pulido, además de resortes y desconector completamente mecanizado, que se instalarán en la mayoría de los modelos de 1911 Autos con poca o ninguna adaptación necesaria. Ayuda a promover un mejor control del gatillo y una precisión mejorada. Pro Match - cuenta con martillo y fiador cortados por EDM alámbrico que son doblemente tratados térmicamente, luego acabados a muela para una durabilidad excepcional - peso de disparo de 3 1/2 lb. Commander Match - ¡Estilo Defensa Personal! Un peso de disparo de gatillo profesional de 4 lb.
ESPECIFICACIONES: El kit incluye martillo, fiador, resorte del fiador, muelle principal (resorte del martillo) y desconector. Pro Match - Acero inoxidable, Rc 50. Commander Match - Acero inoxidable, martillo de acero mecanizado, lados pulidos, Rc 50.
Más...
Evaluaciones de clientes para NOWLIN COMMANDER MATCH TRIGGER JOB
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 4
Would buy again(31/08/2013)
Installed one in my Colt Gov. model last night . Install was easy .Just remember how the old parts came out and put the new ones in the same way . Now the trigger pull is right at 4 pounds and it breaks beautiful . Very happy .
More work than expected(20/05/2011)
The Pro trigger kit did what it claimed. It provided a safe, secure trigger that breaks at 31/2 lbs as advertised. However the trigger hook surfaces were quite rough and needed lots of stoning with a hard Arkansas stone to smooth it out.
This Knowlin kit does the job well(31/05/2011)
I replaced the hammer, sear, sear spring, diconnector, and main spring in my colt XSE. The colt had a 4 1/2 pound trigger pull, and after installation the trigger pull was clean, crisp, 3 1/4 pounds. I have fired about 12000 rounds since the installation and the trigger is still as good as it was upon installation.
well worth it(30/10/2011)
I bought the Nowlin Pro-Match trigger job for my Remington R1 1911. There were a couple of minor issues with the installation. I had to do a bit of filing on the sear to get the thumb safety to slide back in place. Also, The sear spring needed some minor adjustment to get the grip safety to function properly. This was the first 1911 pistol I'd taken apart. It's a bit surprising how small the parts are for a relatively large pistol. If you keep track of all the parts and watch the installation video on the Brownells website, there shouldn't be any problems. The bottom line for me is that the trigger pull on the my R1 is lighter and more consistent now.
The easest way to upgrade your 1911(22/11/2011)
I install this trigger job kit along with the 1911 AUTO ULTRALIGHT MATCH TRIGGER and it took my gun to a whole other level!!! Sweet, crisp and precise gun and really makes a difference at the range.
*** Be careful if you don't have a beaver tail on your 1911 because that will be something you will have to replace too ***
It's nice to buy American made products.(13/12/2011)
The first kit I received had a issue with the hammer. I contacted the company and the President contacted me back and shipped me a replacement which worked flawlessly. Great company/people to work with.
hammer/sear mis-match(06/05/2013)
installed in a caspian .45...hammer notch had only the center 1/3 in contact with full face sear. 1/3 of Rt and left hammer notch was missing. Hammer at full position would lock with sear due to rough interface and deap hammer notch.