Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

EGW
1911 GRIP SCREW BUSHINGS

841370101917 296000140

Whether you’re building a custom 1911 or just upgrading grips, these high-quality, economical replacement grip bushings will provide a secure, neat-looking installation.

SPECS: Carbon steel, blued, or stainless steel (SS), natural finish. Sold in 4-paks. Bushings - .236"-60 tpi exterior threads, .150"-50 tpi interior threads.

Más...

Tanto si estás construyendo una 1911 personalizada como si solo estás actualizando los agarres, estos casquillos de reemplazo de alta calidad y económicos proporcionarán una instalación segura y de aspecto ordenado.

ESPECIFICACIONES: Acero al carbono, azulado, o acero inoxidable (SS), acabado natural. Se venden en paquetes de 4. Casquillos - roscas exteriores de .236"-60 tpi, roscas interiores de .150"-50 tpi.

Más...

Evaluaciones de clientes para EGW GRIP SCREW BUSHINGS, BLUED

Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 4,7

Excellent (19/11/2011)

Bushing just slightly too long. I needed to file each one down just a little to keep it from protruding into the magazine well. Not a problem as most M1911A1 parts need to be fitted.

Bushings Made the Way they Should Be (05/02/2013)

Bushing holes in the Frame must be chamferred on the inside for proper swaging. The EGW bushings are made slightly longer so that they will have enough length to flare properly into the inside hole chamfers. Unless these holes are chamferred on the inside, the bushing will not flare out for a proper and secure fastening. Using a bushing swaging/flaring tool without first chamferring the inside Frame holes is a waste of time! Also, to avoid chipping the heads of any bushing, always use a tap to clean up the Frame hole threads and make sure that the interior of the bushing installation bit is not worn. NEVER use a screwdriver to install a bushing, as this is a sure way to chip the head of any make of Bushing! It is unfair to criticize these parts because the user does not know how to install them properly! I always use EGW parts for customer's and my own personal pistols, because they are simply the best!!

Quality Product & Easy to Install (02/01/2014)

I messed up a screw and bushing attempting to install a Pachmayr Finger Groove grip on my Colt Government 38 Super. I ordered a set of the stainless bushings along with the matching hex screws.

Taking the advise of one of the reviewers I also ordered a bushing tool which made the removal and installation of the new bushings a snap.

These looked and functioned so well I removed all the three good bushings and used this complete set of bushings and screws.

I would highly recommend the stainless bushing & hex screws and certainly add one of those bushing tools to your order if you do not have one.

Leer 3 mas calificaciones en brownells.com

18.9 18.9 2 EUR

N.º de producto: 296000140
EGW GRIP SCREW BUSHINGS, BLUED
Ref Fabricante: 11383 841370101917 Tanto si estás construyendo una 1911 personalizada como si solo estás actualizando los agarres, estos casquillos de reemplazo de alta calidad y económicos proporcionarán una instalación segura y de aspecto ordenado.

18.9 EUR 33 18,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911 Modelo: Government, Commander, Officers

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Hacer: 1911 Modelo: Commander,Government,Officers Peso de entrega: 0,009kg Ancho de envío: 83mm Longitud de envío: 146mm UPC : 841370101917

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

N.º de producto: 296000141
EGW GRIP SCREW BUSHINGS, STAINLESS
Ref Fabricante: 11381 841370101894 Tanto si estás construyendo una 1911 personalizada como si solo estás actualizando los agarres, estos casquillos de reemplazo de alta calidad y económicos proporcionarán una instalación segura y de aspecto ordenado.

18.9 EUR 16 18,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911 Modelo: Government, Commander, Officers

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Actualiza tu 1911 con los casquillos de agarre EGW. 🔩 Alta calidad y fácil instalación para un acabado seguro y atractivo.

Whether you’re building a custom 1911 or just upgrading grips, these high-quality, economical replacement grip bushings will provide a secure, neat-looking installation.

SPECS: Carbon steel, blued, or stainless steel (SS), natural finish. Sold in 4-paks. Bushings - .236"-60 tpi exterior threads, .150"-50 tpi interior threads.

Más...

ESPECIFICACIONES: Acero al carbono, azulado, o acero inoxidable (SS), acabado natural. Se venden en paquetes de 4. Casquillos - roscas exteriores de .236"-60 tpi, roscas interiores de .150"-50 tpi.

Más...

Evaluaciones de clientes para EGW GRIP SCREW BUSHINGS, BLUED

Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 4,7

Excellent (19/11/2011)

Bushing just slightly too long. I needed to file each one down just a little to keep it from protruding into the magazine well. Not a problem as most M1911A1 parts need to be fitted.

Bushings Made the Way they Should Be (05/02/2013)