CYLINDER & SLIDE
1911 TACTICAL SEAR

000000000116 206039002

Hardened-Alloy Steel For Durability & Long Life

Specifically designed for durability and extra-long service life. EDM, wire cut, then CNC, finish machined from A-2 tool steel and hardened to Rc 48-52 so they hold a finely-stoned edge for thousands and thousands of rounds without failure. Pre-prepped hooks and sear face require only final stoning to achieve a clean, crisp trigger pull. Plus, the sear features the proper relief cut so the hammer resets firmly during cycling. All parts checked for proper hardness.

SPECS: A-2 tool steel, in-the-white or Stainless Steel, Rc 48-52.

Más...

Acero Aleado Endurecido Para Durabilidad y Larga Vida

Diseñado específicamente para durabilidad y una larga vida útil. Fabricado por EDM, cortado con alambre y luego mecanizado CNC a partir de acero de herramienta A-2 y endurecido a Rc 48-52 para que mantengan un filo finamente afilado durante miles y miles de disparos sin fallar. Los ganchos pre-preparados y la cara del sear solo requieren un afilado final para lograr un disparo limpio y nítido. Además, el sear cuenta con el corte de alivio adecuado para que el martillo se reinicie firmemente durante el ciclo. Todas las piezas están verificadas para asegurar la dureza adecuada.

ESPECIFICACIONES: Acero de herramienta A-2, sin acabado o Acero Inoxidable, Rc 48-52.

Más...

Evaluaciones de clientes para CYLINDER & SLIDE TACTICAL SEAR

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,8

Great performance from C&S! (06/01/2012)

As stated, the sear did require minimal stoning with the finest ceramic stone to polish up the contact surfaces. My trigger breaks right at 4.5 ounces and feels just like breaking that "Glass" rod. If you aren't familiar with ignition system parts then please don't try to install this on your own!

Perfect! (22/11/2012)

Simply it works perfectly!

Great product (13/01/2012)

I ordered this sear along with the Tactical II hammer. Wow! Trigger pull is crisp and smooth as glass without any modification to the engagement surfaces. Final finish is excellent and looks as tough as nails. Installation is very simple but slight fitting to your thumb safety may be required to ensure it engages properly.

CS011 1911 AUTO TACTICAL SEAR (22/01/2012)

I used this sear with a Cylinder & Slide CS202 Tactical II Hammer #206-039-003, and the sear required a more positive primary angle then was on the sear and a very small secondary angle then I normally cut and polish with EGW, Wilson and Brown sears and hammers. The hooks were pre cut, squared and well polished at .020" which is within normal competition height. The sear has held its cut and polished edge for well over 10000 rounds and still breaks at 2 Lbs 12 oz with no follow or other problems. Sear is hard high quality steel and very well prepped.

Crisper is nicer (11/02/2012)

I'm a satisfied customer. I haven't bought enough stuff for my 1911 to be a truly picky purchaser; maybe in the future, but right now, the products I have bought have produced the results I have been hoping for with a minimum of fuss and bother. The sear only needed (did it really or did I just need to do it?) a couple of strokes with the polishing stone before installation. Much crisper on the break. With the old, I could "feel" the break coming. With this it's like you always read...definitely surprise with no clue of when it's going to break. I love it.

Leer 5 mas calificaciones en brownells.com

64.9 64.9 1 EUR

N.º de producto: 206039002
CYLINDER & SLIDE TACTICAL SEAR
Ref Fabricante: CS0011 000000000116 Diseñado específicamente para durabilidad y una larga vida útil. Fabricado por EDM, cortado con alambre y luego mecanizado CNC a partir de acero de herramienta A-2 y endurecido a Rc 48-52 para que mantengan un filo finamente afilado durante miles y miles de disparos sin fallar. Los ganchos pre-preparados y la cara del sear solo requieren un afilado final para lograr un disparo limpio y nítido. Además, el sear cuenta con el corte de alivio adecuado para que el martillo se reinicie firmemente durante el ciclo. Todas las piezas están verificadas para asegurar la dureza adecuada.

64.9 EUR 4 64,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911 Modelo: Government, Commander, Officers

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Fabricado con acero de herramienta A-2 y endurecido a Rc 48-52 para durabilidad y larga vida útil.
Los ganchos pre-preparados y la cara del sear solo requieren un afilado final para un disparo limpio y nítido.
Cuenta con el corte de alivio adecuado para que el martillo se reinicie firmemente durante el ciclo.

Atributos

Hacer: 1911 Modelo: Commander,Government,Officers Peso de entrega: 0,009kg Ancho de envío: 83mm Longitud de envío: 146mm UPC : 000000000116