Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

ED BROWN
1911 TWO-PIECE GUIDE ROD

800732889009 087045889

Prevents Recoil Spring Bind; Makes Takedown Easier

Full-length, two piece design fully supports the recoil spring to help the pistol chamber, extract and cycle smoother. Helps prevent spring bind, makes slide takedown fast and simple. Long wearing, shock-resistant head and hardened stainless steel shaft stand up to both competition and duty use.

SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.

Más...

Previene el Atasco del Muelle Recuperador; Facilita el Desmontaje

Diseño completo de dos piezas que soporta totalmente el muelle recuperador para ayudar a que la pistola recámara, extrae y cicla de manera más suave. Ayuda a prevenir el atasco del muelle recuperador, facilitando el desmontaje de la corredera de forma rápida y sencilla. Cabeza resistente a impactos de larga duración y eje de acero inoxidable endurecido, diseñados para resistir tanto en competiciones como en uso profesional.

ESPECIFICACIONES: Acero inoxidable. Incluye tapón de varilla guía y llave Allen de 5/32".

Más...

Evaluaciones de clientes para ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"

Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,4

It may work with some machining (03/05/2010)

Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.

NOT TOO LONG FOR 4.25" COMMANDER (27/09/2012)

THIS IS VERY WELL MADE PART. DROPS RIGHT IN ON TRUE COMMANDERS. JUST MAKE SURE IT'S A 4.25" BARRELED COMMANDER. IF YOUR COMMANDER HAS A 4" BARREL IT WILL OBVIOUSLY BE A LITTLE LONG. I'VE PUT THEM IN COLTS & DAN WESSONS FOR CUSTOMERS & THEY WHERE VERY PLEASED!

Great product (01/09/2016)

This is a high quality product. It's sized perfectly for my Colt pistol.

Controls heavy recoil from +P loads (06/01/2012)

I wasn't really looking to upgrade my mil-spec guide rod until I test fired a friends 1911 with this product installed and I was amazed at the difference. Needless to say it is installed in my weapon and it truly tames those +P rounds. I wouldn't recommend firing super hot ammo all the time, but I like to practice with what I intend to use for self defense. I loved this product!

Good Rock Island1911 after alteration (25/02/2012)

I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.

Good after minor alteration (25/02/2012)

It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.

EASY UPGRADE (27/09/2012)

I'VE INSTALLED ALOT OF THESE IN CUSTOMERS GUNS. COLT, SPRINGFIELD, KIMBER, DAN WESSON, TAURUS, ETC.. ALL THE BENEFITS OF A 1-PIECE GUIDE ROD BUT MAKES IT MUCH EASIER TO DISASSEMBLE. I'VE NEVER HAD TO GRIND ON 1 OR MODIFIY IN ANY WAY. BEAUTIFUL FINISH, LOOKS LIKE ONE SOLID PIECE UNTIL YOU UNSREW IT.

Over All Good Drop In Upgrade (09/06/2014)

I installed this on my Ruger SR1911 and it was a perfect fit. The OAL was spot on. Very easy to install (if you can field strip your weapon you can install this part)and the included allen wrench actually fits. A bit of a rarity as far as included tools go these days, and it's not a soft steel wrench that rounds off easily. Not that you need a lot of torque on this. The spring cup to guide rod fit is surprisingly tight. Another advantage that is not in the description is a little added muzzle weight. Not enough to be a bother while sighting but helps to reduce muzzle rise just slightly. I also suspect the spring cup to be slightly thicker between the spring and barrel bushing. The new parts went in a little stiffer than the factory parts did. My pistol only had about a box of ammo through it before the upgrade.
The only thing I think I'll be doing to improve this part is a bit of polishing. I can feel the spring rub against the guide rod, but if I were more patient I'm sure the parts would smooth themselves out with a few trips to the range.
In conclusion I would recommend this as a simple upgrade to any level of 1911 shooter. I'll be ordering more for my other govt' models.

1911 TAURUS (30/06/2015)

Fits perfect on my taurus PT 1911

Leer 9 mas calificaciones en brownells.com

54.9 59.9 2 EUR

N.º de producto: 087045889
ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"
Ref Fabricante: 889 800732889009 Diseño completo de dos piezas que soporta totalmente el muelle recuperador para ayudar a que la pistola recámara, extrae y cicla de manera más suave. Ayuda a prevenir el atasco del muelle recuperador, facilitando el desmontaje de la corredera de forma rápida y sencilla. Cabeza resistente a impactos de larga duración y eje de acero inoxidable endurecido, diseñados para resistir tanto en competiciones como en uso profesional.

54.9 EUR 10 54,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911 Modelo: Government

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Diseño de dos piezas que soporta el muelle recuperador, mejorando el ciclo de la pistola y facilitando el desmontaje de la corredera.
Fabricado en acero inoxidable endurecido con cabeza resistente a impactos, ideal para competiciones y uso profesional.
Incluye tapón de varilla guía y llave Allen de 5/32".

Atributos

Hacer: 1911 Modelo: Government Peso de entrega: 0,064kg Altura de envío: 13mm Ancho de envío: 83mm Longitud de envío: 146mm UPC : 800732889009

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

N.º de producto: 087045890
ED BROWN TWO PIECE GUIDE ROD FITS COMMANDER 4 1/4"
Ref Fabricante: 889C 800732889023 Diseño completo de dos piezas que soporta totalmente el muelle recuperador para ayudar a que la pistola recámara, extrae y cicla de manera más suave. Ayuda a prevenir el atasco del muelle recuperador, facilitando el desmontaje de la corredera de forma rápida y sencilla. Cabeza resistente a impactos de larga duración y eje de acero inoxidable endurecido, diseñados para resistir tanto en competiciones como en uso profesional.

59.9 EUR 2 59,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Hacer: 1911 Modelo: Commander

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu 1911 con la guía de dos piezas de ED BROWN. 🛠️ Diseño resistente que facilita el desmontaje y mejora el rendimiento en competiciones.

Prevents Recoil Spring Bind; Makes Takedown Easier

SPECS: Stainless steel. Includes guide rod plug and 5/32" Allen wrench.

Más...

Previene el Atasco del Muelle Recuperador; Facilita el Desmontaje

ESPECIFICACIONES: Acero inoxidable. Incluye tapón de varilla guía y llave Allen de 5/32".

Más...

Evaluaciones de clientes para ED BROWN TWO PIECE GUIDE ROD FITS GOVT. 5"

Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 4,4

It may work with some machining (03/05/2010)

Easy to install - needs some work on it to look right, rod to long, sticks out 1/8 inch in front of barrel bushing.

NOT TOO LONG FOR 4.25" COMMANDER (27/09/2012)

Great product (01/09/2016)

This is a high quality product. It's sized perfectly for my Colt pistol.

Controls heavy recoil from +P loads (06/01/2012)

Good Rock Island1911 after alteration (25/02/2012)

I had to grind a little bit of material off of the round section of the back of the guid rod base. It was not letting the base site flush. I have a 2011 Rock Island full size 1911 A1FS GI.

Good after minor alteration (25/02/2012)

It requred some grinding of the round backing in order for it not to get stuck in a position that caued binding. I put it on a 2011 Rock Island 1922 A!FS.

EASY UPGRADE (27/09/2012)