Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails.
Reinforced, injection-molded polymer, Black, Dark Earth, or O.D. Green. Heights measured from top of rail to top of sight. Rear Sight - 1.5” (3.8cm) long deployed, 2.6” (6.8cm) long folded, 1.2” (3cm) wide, .5” (1.3cm) high folded, 1.6” (4cm) high extended. Large aperture, .185” (4.7mm) diameter. Small aperture, .070” (1.8mm) dia.
Más...
Miras de polímero montadas en perfil bajo para carril superior, se despliegan al instante con solo tocarlas con un dedo, proporcionando una mira de respaldo si falla una óptica principal. Sus contornos aerodinámicos evitan enganches con ramas, correas u otro equipo cuando están plegadas. Mecanismo de liberación ambidiestro con resorte permite presionar la pestaña ranurada a cualquiera de los lados de la mira para desplegarla y bloquearla en su lugar. Presionar las mismas pestañas retrae la mira cuando ya no se necesita. Utiliza menos de 1" de espacio en el riel receptor Picatinny MIL-STD 1913 y se bloquea de forma segura con el pasador transversal de acero incluido. Proporciona la misma altura sobre el eje que las miras de hierro estándar A2. La mira trasera ajustable para el viento tiene dos aperturas: una grande de .185" y una pequeña de .070". Diseñada para rifles y carabinas tipo AR, se adapta a cualquier arma con rieles Picatinny.
Polímero reforzado, moldeado por inyección, disponible en Negro, Tierra Oscura o Verde O.D. Las alturas se miden desde la parte superior del riel hasta la parte superior de la mira. Mira Trasera - Desplegada mide 1.5” (3.8cm) de largo, plegada 2.6” (6.8cm) de largo, 1.2” (3cm) de ancho, .5” (1.3cm) de alto plegada, 1.6” (4cm) de alto extendida. Apertura grande, .185” (4.7mm) de diámetro. Apertura pequeña, .070” (1.8mm) de diámetro.
Más...
Evaluaciones de clientes para MAGPUL MBUS REAR SIGHT FLIP-UP POLYMER FOR AR-15 STEALTH GRAY
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 3,6
MBUS GEN 2 REAR OD GREEN by MAGPUL(01/07/2011)
I use this on my 9mm AR low profile nice look and works as advertised a bit tight with the changing of the sight aperture and sighting in but works none the less.
Best tactical color BUIS(23/02/2013)
OD green is my favourite color in tactical type firearms. Black guns is more common while OD green is more stunning with tactical type rifles when coordinated properly with matching furniture. Magpul's MBUS is an excellent alternative to metal BUIS at the fraction of the price. However, care must be observe not to excert excessive force when tightening the assembly screw as it will crack the plastic material. The supplied front adjustment tool makes sight adjustment a breeze. Great design, easy to install and higly functional.
Decent Value, So-So Design(11/03/2016)
Technically speaking, there's nothing to complain about with the MBUS; they're easy to install, they zero simply enough, and the fast and flexible deployment options (just press the center or either of the side flanges) are a welcome feature. However, the idea of sights is to allow reasonably fast and accurate aiming in the field, and a couple of areas of the MBUS design don't lend themselves all that well to this purpose. Specific to the rear sight is the square profile of its "ring" - the holes are round, but the pieces into which they're drilled are square. While this may seem immaterial, in practice the shape clashes with the roundness of the hole, doesn't do as much to draw in the eye, and, thanks to the extra material at the corners, blocks more of the space around the target. For me, this makes aiming slower and clumsier at defensive ranges, at least when using the more accurate narrow aperture. The flip-up piece used to change aperture size isn't quite as fast as a traditional rotating head, though it does help minimize the sight's flipped-down profile for those who use large-lens optics. And this particular color (FDE) was found to reflect more light into the eye from the posts flanking the aperture, and this sometimes added to the element of distraction (although the contrast did help isolate the black center piece, so I guess it's a trade-off). So if you really just want an affordable but decent-quality backup unit, you could do a lot worse. But if your irons are more than just a last-ditch measure, I'll suggest springing for a nicer set.
Mmmmmmm.... bear claws!(24/03/2011)
I have both the original MBUS and the Gen 2 MBUS installed on my rifles and they are both reliable well made sights. While the Gen 2 is a bit lower profile and the retaining nut casing is a tad thicker, I really don't see a huge difference in the two products. For the money, a great BUS, I just don't see what all of the hoopla and the suspense was about. Well worth the money, though.
The real deal(02/06/2011)
These sights are as tough as nails without adding extra weight. With all of the extra equipment on my M4, weight is an issue for extended periods of use. It is nice to add quality equipment with no change in weight, and the MBUS work great and stay out of the way until you need them. A must have if you have an M4.
Be Aware(02/02/2012)
This sight will NOT co-witness with a standard A2 front sight. If you have a Bushmaster Dissapator type rifle, look elsewere. I still haven't found a rear sight that will line up correctly with a permanent front sight. Good quality sight but needs an adapter to raise it up to the correct level.
I would by it again(04/03/2012)
Mounted this on my AR build and have had no problems. I only rated it 4 stars because the peep sight could be smaller for the long range shooting. Overall though very satisfied and will purchase again for my next build. Brownells has fast shipping to, withing three days I had my sight.
Okay but flimsy(30/01/2013)
This would probably hold up for a use or two, but the materials and the workmanship were , well, sort of flimsy, flexible and not confidence inspiring. For a very limited, occasional use product it might be okay, but for anything serious, it just won't make a person feel like it'll last or work. I returned this item.
Decent but not great(03/04/2013)
I'm a big fan of Magpul hardware, but this fold-down backup sight was a little underwhelming. It does not seem as sturdy as I would have liked. It is functional and works as advertised but I have reservations about the long-term usability of this item and whether or not it will stay in one piece and hold zero over the long term. It was very difficult to flip down the front peep aperture, so much that I almost broke it. I know Magpul's area of expertise is quality injection molded plastics, but sadly I have come to the conclusion that there is no substitute for quality all-metal sights.
N.º de producto: 100014406 MAGPUL MBUS REAR SIGHT FLIP-UP POLYMER FOR AR-15 STEALTH GRAY Ref Fabricante: MAG248-GRY873750011493 Miras de polímero montadas en perfil bajo para carril superior, se despliegan al instante con solo tocarlas con un dedo, proporcionando una mira de respaldo si falla una óptica principal. Sus contornos aerodinámicos evitan enganches con ramas, correas u otro equipo cuando están plegadas. Mecanismo de liberación ambidiestro con resorte permite presionar la pestaña ranurada a cualquiera de los lados de la mira para desplegarla y bloquearla en su lugar. Presionar las mismas pestañas retrae la mira cuando ya no se necesita. Utiliza menos de 1" de espacio en el riel receptor Picatinny MIL-STD 1913 y se bloquea de forma segura con el pasador transversal de acero incluido. Proporciona la misma altura sobre el eje que las miras de hierro estándar A2. La mira trasera ajustable para el viento tiene dos aperturas: una grande de .185" y una pequeña de .070". Diseñada para rifles y carabinas tipo AR, se adapta a cualquier arma con rieles Picatinny.
Miras de polímero de perfil bajo para carril superior, desplegables al instante con un solo toque.
Ajustable para el viento con dos aperturas: grande de .185" y pequeña de .070".
Compatible con rifles y carabinas tipo AR y cualquier arma con rieles Picatinny.
Atributos
Color:
Gray
Estilo:
Flip-Up
Hacer:
AR-15
Peso de entrega: 0,054kgAltura de envío: 25mmAncho de envío: 102mmLongitud de envío: 165mm
UPC
: 873750011493
Detalles del artículo
Hecho en USA
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
New
N.º de producto: 100006787 MAGPUL MBUS REAR SIGHT FLIP-UP POLYMER FOR AR-15 BLACK Ref Fabricante: MAG248-BLK873750004358 Miras de polímero montadas en perfil bajo para carril superior, se despliegan al instante con solo tocarlas con un dedo, proporcionando una mira de respaldo si falla una óptica principal. Sus contornos aerodinámicos evitan enganches con ramas, correas u otro equipo cuando están plegadas. Mecanismo de liberación ambidiestro con resorte permite presionar la pestaña ranurada a cualquiera de los lados de la mira para desplegarla y bloquearla en su lugar. Presionar las mismas pestañas retrae la mira cuando ya no se necesita. Utiliza menos de 1" de espacio en el riel receptor Picatinny MIL-STD 1913 y se bloquea de forma segura con el pasador transversal de acero incluido. Proporciona la misma altura sobre el eje que las miras de hierro estándar A2. La mira trasera ajustable para el viento tiene dos aperturas: una grande de .185" y una pequeña de .070". Diseñada para rifles y carabinas tipo AR, se adapta a cualquier arma con rieles Picatinny.
N.º de producto: 100006788 MAGPUL MBUS REAR SIGHT FLIP-UP POLYMER FOR AR-15 FDE Ref Fabricante: MAG248-FDE873750004365 Miras de polímero montadas en perfil bajo para carril superior, se despliegan al instante con solo tocarlas con un dedo, proporcionando una mira de respaldo si falla una óptica principal. Sus contornos aerodinámicos evitan enganches con ramas, correas u otro equipo cuando están plegadas. Mecanismo de liberación ambidiestro con resorte permite presionar la pestaña ranurada a cualquiera de los lados de la mira para desplegarla y bloquearla en su lugar. Presionar las mismas pestañas retrae la mira cuando ya no se necesita. Utiliza menos de 1" de espacio en el riel receptor Picatinny MIL-STD 1913 y se bloquea de forma segura con el pasador transversal de acero incluido. Proporciona la misma altura sobre el eje que las miras de hierro estándar A2. La mira trasera ajustable para el viento tiene dos aperturas: una grande de .185" y una pequeña de .070". Diseñada para rifles y carabinas tipo AR, se adapta a cualquier arma con rieles Picatinny.
74.9EUR21474,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Color: Dark EarthEstilo: Flip-UpHacer: AR-15
N.º de producto: 100006789 MAGPUL MBUS REAR SIGHT FLIP-UP POLYMER FOR AR-15 ODG Ref Fabricante: MAG248-ODG873750004372 Miras de polímero montadas en perfil bajo para carril superior, se despliegan al instante con solo tocarlas con un dedo, proporcionando una mira de respaldo si falla una óptica principal. Sus contornos aerodinámicos evitan enganches con ramas, correas u otro equipo cuando están plegadas. Mecanismo de liberación ambidiestro con resorte permite presionar la pestaña ranurada a cualquiera de los lados de la mira para desplegarla y bloquearla en su lugar. Presionar las mismas pestañas retrae la mira cuando ya no se necesita. Utiliza menos de 1" de espacio en el riel receptor Picatinny MIL-STD 1913 y se bloquea de forma segura con el pasador transversal de acero incluido. Proporciona la misma altura sobre el eje que las miras de hierro estándar A2. La mira trasera ajustable para el viento tiene dos aperturas: una grande de .185" y una pequeña de .070". Diseñada para rifles y carabinas tipo AR, se adapta a cualquier arma con rieles Picatinny.
Low-profile, flattop-mounted, polymer sights deploy instantly at the touch of a finger to provide backup sighting if a primary optic fails. Streamlined contours mean there’s nothing to snag on brush, sling, or other gear when folded. Spring-loaded ambidextrous release mechanism lets you hit the grooved tab on either side of the sight to deploy, and lock it in place. Hitting the same tabs retract the sight when you’re done. Uses less than 1" of MIL-STD 1913 Picatinny receiver rail space and locks securely in place with the included steel crossbolt. Provides the same height over bore as standard A2 iron sights. Windage-adjustable rear sight has two apertures: a large, .185" peep and a .070" peep. Designed for AR-type rifles and carbines, fits any weapon with Picatinny rails.
Reinforced, injection-molded polymer, Black, Dark Earth, or O.D. Green. Heights measured from top of rail to top of sight. Rear Sight - 1.5” (3.8cm) long deployed, 2.6” (6.8cm) long folded, 1.2” (3cm) wide, .5” (1.3cm) high folded, 1.6” (4cm) high extended. Large aperture, .185” (4.7mm) diameter. Small aperture, .070” (1.8mm) dia.
Más...
Miras de polímero montadas en perfil bajo para carril superior, se despliegan al instante con solo tocarlas con un dedo, proporcionando una mira de respaldo si falla una óptica principal. Sus contornos aerodinámicos evitan enganches con ramas, correas u otro equipo cuando están plegadas. Mecanismo de liberación ambidiestro con resorte permite presionar la pestaña ranurada a cualquiera de los lados de la mira para desplegarla y bloquearla en su lugar. Presionar las mismas pestañas retrae la mira cuando ya no se necesita. Utiliza menos de 1" de espacio en el riel receptor Picatinny MIL-STD 1913 y se bloquea de forma segura con el pasador transversal de acero incluido. Proporciona la misma altura sobre el eje que las miras de hierro estándar A2. La mira trasera ajustable para el viento tiene dos aperturas: una grande de .185" y una pequeña de .070". Diseñada para rifles y carabinas tipo AR, se adapta a cualquier arma con rieles Picatinny.
Polímero reforzado, moldeado por inyección, disponible en Negro, Tierra Oscura o Verde O.D. Las alturas se miden desde la parte superior del riel hasta la parte superior de la mira. Mira Trasera - Desplegada mide 1.5” (3.8cm) de largo, plegada 2.6” (6.8cm) de largo, 1.2” (3cm) de ancho, .5” (1.3cm) de alto plegada, 1.6” (4cm) de alto extendida. Apertura grande, .185” (4.7mm) de diámetro. Apertura pequeña, .070” (1.8mm) de diámetro.
Más...
Evaluaciones de clientes para MAGPUL MBUS REAR SIGHT FLIP-UP POLYMER FOR AR-15 STEALTH GRAY
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 3,6
MBUS GEN 2 REAR OD GREEN by MAGPUL(01/07/2011)
I use this on my 9mm AR low profile nice look and works as advertised a bit tight with the changing of the sight aperture and sighting in but works none the less.
Best tactical color BUIS(23/02/2013)
OD green is my favourite color in tactical type firearms. Black guns is more common while OD green is more stunning with tactical type rifles when coordinated properly with matching furniture. Magpul's MBUS is an excellent alternative to metal BUIS at the fraction of the price. However, care must be observe not to excert excessive force when tightening the assembly screw as it will crack the plastic material. The supplied front adjustment tool makes sight adjustment a breeze. Great design, easy to install and higly functional.
Decent Value, So-So Design(11/03/2016)
Technically speaking, there's nothing to complain about with the MBUS; they're easy to install, they zero simply enough, and the fast and flexible deployment options (just press the center or either of the side flanges) are a welcome feature. However, the idea of sights is to allow reasonably fast and accurate aiming in the field, and a couple of areas of the MBUS design don't lend themselves all that well to this purpose. Specific to the rear sight is the square profile of its "ring" - the holes are round, but the pieces into which they're drilled are square. While this may seem immaterial, in practice the shape clashes with the roundness of the hole, doesn't do as much to draw in the eye, and, thanks to the extra material at the corners, blocks more of the space around the target. For me, this makes aiming slower and clumsier at defensive ranges, at least when using the more accurate narrow aperture. The flip-up piece used to change aperture size isn't quite as fast as a traditional rotating head, though it does help minimize the sight's flipped-down profile for those who use large-lens optics. And this particular color (FDE) was found to reflect more light into the eye from the posts flanking the aperture, and this sometimes added to the element of distraction (although the contrast did help isolate the black center piece, so I guess it's a trade-off). So if you really just want an affordable but decent-quality backup unit, you could do a lot worse. But if your irons are more than just a last-ditch measure, I'll suggest springing for a nicer set.
Mmmmmmm.... bear claws!(24/03/2011)
I have both the original MBUS and the Gen 2 MBUS installed on my rifles and they are both reliable well made sights. While the Gen 2 is a bit lower profile and the retaining nut casing is a tad thicker, I really don't see a huge difference in the two products. For the money, a great BUS, I just don't see what all of the hoopla and the suspense was about. Well worth the money, though.
The real deal(02/06/2011)
These sights are as tough as nails without adding extra weight. With all of the extra equipment on my M4, weight is an issue for extended periods of use. It is nice to add quality equipment with no change in weight, and the MBUS work great and stay out of the way until you need them. A must have if you have an M4.
Be Aware(02/02/2012)
This sight will NOT co-witness with a standard A2 front sight. If you have a Bushmaster Dissapator type rifle, look elsewere. I still haven't found a rear sight that will line up correctly with a permanent front sight. Good quality sight but needs an adapter to raise it up to the correct level.
I would by it again(04/03/2012)
Mounted this on my AR build and have had no problems. I only rated it 4 stars because the peep sight could be smaller for the long range shooting. Overall though very satisfied and will purchase again for my next build. Brownells has fast shipping to, withing three days I had my sight.
Okay but flimsy(30/01/2013)
This would probably hold up for a use or two, but the materials and the workmanship were , well, sort of flimsy, flexible and not confidence inspiring. For a very limited, occasional use product it might be okay, but for anything serious, it just won't make a person feel like it'll last or work. I returned this item.
Decent but not great(03/04/2013)
I'm a big fan of Magpul hardware, but this fold-down backup sight was a little underwhelming. It does not seem as sturdy as I would have liked. It is functional and works as advertised but I have reservations about the long-term usability of this item and whether or not it will stay in one piece and hold zero over the long term. It was very difficult to flip down the front peep aperture, so much that I almost broke it. I know Magpul's area of expertise is quality injection molded plastics, but sadly I have come to the conclusion that there is no substitute for quality all-metal sights.