Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

JENTRA
GRIP PLUG for GLOCK®

820103357203 463100017

Keeps Dirt Out of Grip Frame

Snaps into the opening at the rear of the Glock® grip frame for a cleaner appearance, plus keeps dust, dirt, snow and water out of the gun. Creates a perfect location for adding extra weight to competition guns or to counter recoil on light, carry guns. Easily removed, does not alter gun. See specs for proper fit to your model of Glock.

SPECS: JP-1 Fits Gen 3 models: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Fits Gen 3 models: 26, 27, 33.

Más...

Evita la Entrada de Suciedad en el Marco del Agarre

Se encaja en la abertura en la parte trasera del marco del agarre de la Glock® para una apariencia más limpia, además de evitar que el polvo, la suciedad, la nieve y el agua entren en el arma. Crea una ubicación perfecta para añadir peso extra en armas de competición o para contrarrestar el retroceso en armas ligeras de llevar. Se puede quitar fácilmente, no altera el arma. Consulta las especificaciones para el ajuste correcto a tu modelo de Glock.

ESPECIFICACIONES: JP-1 Compatible con modelos Gen 3: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Compatible con modelos Gen 3: 26, 27, 33.

Más...

Evaluaciones de clientes para JENTRA FITS GLOCK®

Número de evaluaciones: 19
De brownells.com: 19
Evaluación media: 4,2

Gen 4 Grip plug (19/02/2015)

After three month on my hip, the grip on my Gen4 G23 had a substantial amount of lint filling the rear void behind the magazine. I installed the grip plug to keep foreign matter out of the trigger mechanism and it seems to be working nicely. If there were anything negative about filling this void, it might be that this plug could slow an emergency reload, creating delays if the magazine failed to drop free as the pre-plug void in the grip allows my thumb to securely grab the magazine and strip it free; this is especially true during type 3 malfunction drills. However, in normal use my G23 has never failed to freely drop magazines... so I'll keep the plug and take my chances.

Must Have (29/01/2017)

glock 21 "SF" (08/07/2010)

SF stands for small frame. It doesn't fit a 3rd generation model 21. Its too small.

Does NOT fit 21 SF (31/03/2012)

this plug did not fit my 21 SF. Pushed into grip and the button engaged the lanyard hole but was not flush with grip bottom. At least 1/8" from going in all the way.

Waste of money (11/09/2017)

Plug does not fit flush on the bottom of the 21SF grip. Do NOT buy.

Fits that hole PERFECTLY (18/11/2009)

This plug fit the Glock 34 peerfectly. Now it looks like a "real" gun.
picture does not do it justice.

Great Fit (06/08/2010)

Agreed picture doesn't do the item justice, this is a definite buy for anyone packing a Glock for CCW

Excellent!!! (03/09/2010)

Plug is easy to snap in and looks great on any glock, does not add much weight, well worth [$]

Hole is plugged. (26/07/2011)

Fit my 21 perfectly.

looks great!! (30/07/2012)

fit like a glove, very easy to put in, a must have for a good price!

Fits like it was made by GLOCK (24/02/2013)

Fit my G22 perfectly!

Perfect Fit (23/08/2013)

Looks and fits like a factory part

Does not fit in Glock 20SF (19/03/2014)

This did not fit in my Glock 20SF unfortunately. However, I have used these grip plugs before in other Glocks and they work great so I still give it 5 stars.

Stays put (04/09/2016)

I bought 3 of them for my guns, one 2nd generation and two 3rd generation. They don't add any length, look good and fit tightly in all models without getting in the way of the magazine. Easy to put in and take out.

perfect addition (11/10/2009)

just enough to fill the hand out, but still keeps it's low profile for perfect concealment.

Bad Design - Causes magazines to snag (21/01/2014)

The JP-3 plug is a poor design. It install easily enough, but creates a ledge with the bottom of the magazine well which will cause the back end of your magazine to snag during reloading. A Glock grip plug should create a smooth snag-free surface to facilitate reloads. A little extra plastic bevel is all that is needed. This model stinks.

great fit and good price (10/09/2016)

Will tell glock here in Mesa where to get them

Great buy (08/12/2011)

Installs in seconds with a perfect fit for the G26. It keeps the gun sealed up so lint and dirt etc. will not get to the action or anything. I use the gun as a carry gun and got sick of cleaning crud out of the grip on a weekly basis and this does the trick. For the price you can't go wrong and will pay for it's self in no time at all. Just from not having to clean it out all the time and cleaning supplies

Glock plug (07/01/2012)

One of the best investments a Glock owner can make.

Leer 19 mas calificaciones en brownells.com

13.9 13.9 1 EUR

N.º de producto: 463100017
JENTRA FITS GLOCK®
Ref Fabricante: JP-1 820103357203 Se encaja en la abertura en la parte trasera del marco del agarre de la Glock® para una apariencia más limpia, además de evitar que el polvo, la suciedad, la nieve y el agua entren en el arma. Crea una ubicación perfecta para añadir peso extra en armas de competición o para contrarrestar el retroceso en armas ligeras de llevar. Se puede quitar fácilmente, no altera el arma. Consulta las especificaciones para el ajuste correcto a tu modelo de Glock.

13.9 EUR 0 13,90 € *

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Hacer: Glock Modelo: 21, 20, 17, 19, 22, 23, 24, 25, 34, 35, 31, 32

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Encaja en la parte trasera del marco del agarre de la Glock® para una apariencia más limpia y protección contra elementos externos.
Ideal para añadir peso extra en armas de competición o contrarrestar el retroceso en armas ligeras.
Compatible con modelos Gen 3 específicos; consulta las especificaciones para el ajuste correcto.

Atributos

Hacer: Glock Modelo: 17,19,20,21,22,23,24,25,31,32,34,35 Peso de entrega: 0,005kg Ancho de envío: 83mm Longitud de envío: 146mm UPC : 820103357203

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1

Mejora tu Glock® con el GRIP PLUG de JENTRA. 🛡️ Mantén la limpieza y añade peso para un mejor rendimiento en competición.

Keeps Dirt Out of Grip Frame

SPECS: JP-1 Fits Gen 3 models: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Fits Gen 3 models: 26, 27, 33.

Más...

Evita la Entrada de Suciedad en el Marco del Agarre

ESPECIFICACIONES: JP-1 Compatible con modelos Gen 3: 17, 19, 22, 23, 31, 32, 34, 35. JP-2 Compatible con modelos Gen 3: 26, 27, 33.

Más...

Evaluaciones de clientes para JENTRA FITS GLOCK®

Número de evaluaciones: 19
De brownells.com: 19
Evaluación media: 4,2

Gen 4 Grip plug (19/02/2015)

Must Have (29/01/2017)

glock 21 "SF" (08/07/2010)

SF stands for small frame. It doesn't fit a 3rd generation model 21. Its too small.

Does NOT fit 21 SF (31/03/2012)

this plug did not fit my 21 SF. Pushed into grip and the button engaged the lanyard hole but was not flush with grip bottom. At least 1/8" from going in all the way.

Waste of money (11/09/2017)

Plug does not fit flush on the bottom of the 21SF grip. Do NOT buy.

Fits that hole PERFECTLY (18/11/2009)

This plug fit the Glock 34 peerfectly. Now it looks like a "real" gun.
picture does not do it justice.

Great Fit (06/08/2010)

Agreed picture doesn't do the item justice, this is a definite buy for anyone packing a Glock for CCW

Excellent!!! (03/09/2010)

Plug is easy to snap in and looks great on any glock, does not add much weight, well worth [$]

Hole is plugged. (26/07/2011)

Fit my 21 perfectly.

looks great!! (30/07/2012)

fit like a glove, very easy to put in, a must have for a good price!

Fits like it was made by GLOCK (24/02/2013)

Fit my G22 perfectly!

Perfect Fit (23/08/2013)

Looks and fits like a factory part

Does not fit in Glock 20SF (19/03/2014)

This did not fit in my Glock 20SF unfortunately. However, I have used these grip plugs before in other Glocks and they work great so I still give it 5 stars.

Stays put (04/09/2016)