Extra Power For Hardball & Heavy Loads In Kimber Compact & Pro-Carry
Fine-tunes recoil for smooth cycling in Kimber Compact and Pro-Carry 4" pistols. Includes extra-power firing pin spring to keep the firing pin stop in place, prevent firing pin float , and to offset the increased slide thrust.
SPECS: Steel spring, 20 lb. Factory original spring averages 18 lb.
Más...
Potencia Extra Para Balas Duras y Cargas Pesadas en Kimber Compact & Pro-Carry
Ajusta la retroceso para un ciclo suave en pistolas Kimber Compact y Pro-Carry de 4". Incluye un muelle extra potente para el percutor para mantener el tope del percutor en su lugar, evitar el movimiento flotante del percutor y compensar el aumento de empuje de la corredera.
ESPECIFICACIONES: Muelle de acero, 20 lb. El muelle original de fábrica tiene un promedio de 18 lb.
Más...
Evaluaciones de clientes para WOLFF X-POWER RECOIL & FIRING PIN SPRING
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 5
No More FTRB(05/02/2012)
After 500 rounds my Kimber Compact was continuing to have FTRB. After installation of these springs the problem has dissapeared. Brownells had them on hand where Wolff doesn't.
way better than factory(17/08/2012)
I have a Kimber Pro Carry and the factory spring is so weak that after 1 or 2 range sessions of 150 rounds, the spring weakens to the point where brass starts hitting me in the face. This spring has fixed the problem and so far, lasted for 3 lengthly range sessions with no sign of weakening. I HIGHLY Recommend.
A must for 4(04/03/2013)
Many thousands of 45 acp rounds have proven these are THE BEST recoil springs for the pro carry Kimbers. You MUST, repeat MUST give up those eight round magazines for the seven rounders when you use this spring The extra strength in the recoil spring will last well past the stock piece which had to be made "lighter" to feed from the eight round magazines. With this recoil spring the eight round magazine spring is not strong enough to get the rounds in place before the slide comes back to battery. So this spring and seven round magazines, or stock spring and eight round magazine and change recoil spring every 350 to 500 rounds. BTW, The full size 1911 does not have this issue, the 3 1/2" 1911's do have the same issue.
Great replacement Parts(08/12/2014)
Great springs, Stopped Brass from hitting me in the face .easy Fix for a low cost .
N.º de producto: 969000137 WOLFF X-POWER RECOIL & FIRING PIN SPRING Ref Fabricante: 32725 Ajusta la retroceso para un ciclo suave en pistolas Kimber Compact y Pro-Carry de 4". Incluye un muelle extra potente para el percutor para mantener el tope del percutor en su lugar, evitar el movimiento flotante del percutor y compensar el aumento de empuje de la corredera.
13.9EUR613,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Hacer: KimberModelo: Compact, Pro CarryPounds: 20 lbs
Extra Power For Hardball & Heavy Loads In Kimber Compact & Pro-Carry
Fine-tunes recoil for smooth cycling in Kimber Compact and Pro-Carry 4" pistols. Includes extra-power firing pin spring to keep the firing pin stop in place, prevent firing pin float , and to offset the increased slide thrust.
SPECS: Steel spring, 20 lb. Factory original spring averages 18 lb.
Más...
Potencia Extra Para Balas Duras y Cargas Pesadas en Kimber Compact & Pro-Carry
Ajusta la retroceso para un ciclo suave en pistolas Kimber Compact y Pro-Carry de 4". Incluye un muelle extra potente para el percutor para mantener el tope del percutor en su lugar, evitar el movimiento flotante del percutor y compensar el aumento de empuje de la corredera.
ESPECIFICACIONES: Muelle de acero, 20 lb. El muelle original de fábrica tiene un promedio de 18 lb.
Más...
Evaluaciones de clientes para WOLFF X-POWER RECOIL & FIRING PIN SPRING
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 5
No More FTRB(05/02/2012)
After 500 rounds my Kimber Compact was continuing to have FTRB. After installation of these springs the problem has dissapeared. Brownells had them on hand where Wolff doesn't.
way better than factory(17/08/2012)
I have a Kimber Pro Carry and the factory spring is so weak that after 1 or 2 range sessions of 150 rounds, the spring weakens to the point where brass starts hitting me in the face. This spring has fixed the problem and so far, lasted for 3 lengthly range sessions with no sign of weakening. I HIGHLY Recommend.
A must for 4(04/03/2013)
Many thousands of 45 acp rounds have proven these are THE BEST recoil springs for the pro carry Kimbers. You MUST, repeat MUST give up those eight round magazines for the seven rounders when you use this spring The extra strength in the recoil spring will last well past the stock piece which had to be made "lighter" to feed from the eight round magazines. With this recoil spring the eight round magazine spring is not strong enough to get the rounds in place before the slide comes back to battery. So this spring and seven round magazines, or stock spring and eight round magazine and change recoil spring every 350 to 500 rounds. BTW, The full size 1911 does not have this issue, the 3 1/2" 1911's do have the same issue.
Great replacement Parts(08/12/2014)
Great springs, Stopped Brass from hitting me in the face .easy Fix for a low cost .