The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
SPECS: Color- Black, Flat Dark Earth, Gray, or O.D. Green. Material- Polymer.
Más...
El M-LOK MVG es un foregrip vertical ligero que se acopla directamente a guardamanos y antebrazos compatibles con M-LOK. El M-LOK MVG está fabricado con el mismo polímero de alta calidad que otros productos de Magpul y utiliza la nueva textura TSP de Magpul para un control positivo en todos los entornos. Con contornos redondeados y una longitud más corta, el M-LOK MVG ha sido optimizado para su uso con el método de disparo "thumb break" y también puede utilizarse como un foregrip vertical tradicional.
ESPECIFICACIONES: Color- Negro, Tierra Oscura Plana, Gris, o Verde O.D. Material- Polímero.
Más...
Evaluaciones de clientes para MAGPUL MVG VERTICAL GRIP M-LOK POLYMER BLACK
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,8
Good, If Limited, Option(14/03/2016)
The MLOK system allows for tighter drop-in handguards by letting you add or remove accessories without removing the guard. The system involves pairing screws with rectangular lock nuts set to a precise height (often found through trial and error) and inserting the complete assembly into the mounting slots. The two screws may share the same slot or bridge adjacent ones, offering flexibility on position. An allen wrench is then inserted through the bottom to actuate the screw heads and thereby turn the nuts about ninety degrees, hopefully clamping them to the interior plate and holding them as you continue tightening. Visual confirmation of nut position is important, but difficult in many positions. Once achieved, though, the mount is very tight and secure. The grip itself is somewhat narrower and arguably a touch shorter than its MOE forbear, and sports a rougher texture on the sides. The concave zone at the top is more pronounced, which combines with the narrower profile for a distinctly slimmer feel. I'd personally like to see a more "full-sized" version in the future, but for now this is the only MLOK vertical grip I can find. In any event, it works reasonably well for a variety of gripping styles, if not spectacularly for any one of them, so it's hard to complain.
Good for lightweight builds(30/06/2016)
A pain to install, it can and will damage poly handguards if one is not careful and tightens the screws too much. Lightweight, stable, and comfy though.
Awesome Vertical Grip(23/07/2017)
As of right now, this appears to be one of the only vertical grips that attatch directly to M-Lok compatible handguards. Installed easily into my V-Seven Weapon Systems M-Lok handguard. Very secure mounting system and slim enough to install under a low profile gas block. Looks very clean and fits flush with the handguard. The grip is fairly short, and aids in a thumb break grip and really helps with pulling the rifle into your shoulder during recoil. Very comfortable grip texture and lightweight at only 1.4oz in total. Great Magpul quality as usual. Thank you Brownells.
Mlok hardware junk (11/05/2018)
Followed the instructions grip was tighten on the mlok rail and it still had play. The vertical grip itself is fine it's the caming mlok t nuts that are junk. I'm switching them out with the standard reliable mount n slot hard ware.
Magpul M-Lok(21/06/2018)
I see guys on line doing video's for installing M-Lok items...Its super simple,adjust the screws like the instructions say...add a touch of blue lok-tight and tighten 15 foot pounds. Or remove the handguards and follow the instructions.
This grip is a little shorter than the Magpul non MOE...will leave your pinky finger wanting more room. But will do the job and will tighten down so well when you hit the ground, it will stay in place.*"*Plus the FACT standarf Magpul gear will not work on a weapon with Magpul MOE M-Lok slots...
The M-LoK slots on hand guards are bigger and wider than standard Magpul hand guards...FYI
N.º de producto: 100016130 MAGPUL MVG VERTICAL GRIP M-LOK POLYMER BLACK Ref Fabricante: MAG597-BLK873750004655 El M-LOK MVG es un foregrip vertical ligero que se acopla directamente a guardamanos y antebrazos compatibles con M-LOK. El M-LOK MVG está fabricado con el mismo polímero de alta calidad que otros productos de Magpul y utiliza la nueva textura TSP de Magpul para un control positivo en todos los entornos. Con contornos redondeados y una longitud más corta, el M-LOK MVG ha sido optimizado para su uso con el método de disparo "thumb break" y también puede utilizarse como un foregrip vertical tradicional.
33.9EUR96733,90 €
*
Plazo de entrega de aproximadamente 6-10 días. Más de 10 pcs. en el almacén de Europa
Attachment:
M-LOK
Color:
Black
Material:
Polymer
Peso de entrega: 0,064kgAltura de envío: 44mmAncho de envío: 76mmLongitud de envío: 165mm
UPC
: 873750004655
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
New
N.º de producto: 100016134 MAGPUL MVG VERTICAL GRIP M-LOK POLYMER FLAT DARK EARTH Ref Fabricante: MAG597-FDE873750004662 El M-LOK MVG es un foregrip vertical ligero que se acopla directamente a guardamanos y antebrazos compatibles con M-LOK. El M-LOK MVG está fabricado con el mismo polímero de alta calidad que otros productos de Magpul y utiliza la nueva textura TSP de Magpul para un control positivo en todos los entornos. Con contornos redondeados y una longitud más corta, el M-LOK MVG ha sido optimizado para su uso con el método de disparo "thumb break" y también puede utilizarse como un foregrip vertical tradicional.
33.9EUR4633,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Attachment: M-LOKColor: Flat Dark EarthMaterial: Polymer
N.º de producto: 100016136 MAGPUL MVG VERTICAL GRIP M-LOK POLYMER STEALTH GRAY Ref Fabricante: MAG597-GRY873750004679 El M-LOK MVG es un foregrip vertical ligero que se acopla directamente a guardamanos y antebrazos compatibles con M-LOK. El M-LOK MVG está fabricado con el mismo polímero de alta calidad que otros productos de Magpul y utiliza la nueva textura TSP de Magpul para un control positivo en todos los entornos. Con contornos redondeados y una longitud más corta, el M-LOK MVG ha sido optimizado para su uso con el método de disparo "thumb break" y también puede utilizarse como un foregrip vertical tradicional.
N.º de producto: 100016139 MAGPUL MVG VERTICAL GRIP M-LOK POLYMER O.D. GREEN Ref Fabricante: MAG597-ODG873750004686 El M-LOK MVG es un foregrip vertical ligero que se acopla directamente a guardamanos y antebrazos compatibles con M-LOK. El M-LOK MVG está fabricado con el mismo polímero de alta calidad que otros productos de Magpul y utiliza la nueva textura TSP de Magpul para un control positivo en todos los entornos. Con contornos redondeados y una longitud más corta, el M-LOK MVG ha sido optimizado para su uso con el método de disparo "thumb break" y también puede utilizarse como un foregrip vertical tradicional.
The M-LOK MVG is a light weight vertical foregrip that attaches directly to M-LOK compatible hand guards and forends. The M-LOK MVG is made from the same high quality polymer as other Magpul products, and uses the new Magpul TSP texture for positive control in all environments. With rounded contours and a shorter length, the M-LOK MVG has been optimized for use with the “thumb break method” of shooting and can also be used as a traditional vertical foregrip.
SPECS: Color- Black, Flat Dark Earth, Gray, or O.D. Green. Material- Polymer.
Más...
El M-LOK MVG es un foregrip vertical ligero que se acopla directamente a guardamanos y antebrazos compatibles con M-LOK. El M-LOK MVG está fabricado con el mismo polímero de alta calidad que otros productos de Magpul y utiliza la nueva textura TSP de Magpul para un control positivo en todos los entornos. Con contornos redondeados y una longitud más corta, el M-LOK MVG ha sido optimizado para su uso con el método de disparo "thumb break" y también puede utilizarse como un foregrip vertical tradicional.
ESPECIFICACIONES: Color- Negro, Tierra Oscura Plana, Gris, o Verde O.D. Material- Polímero.
Más...
Evaluaciones de clientes para MAGPUL MVG VERTICAL GRIP M-LOK POLYMER BLACK
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,8
Good, If Limited, Option(14/03/2016)
The MLOK system allows for tighter drop-in handguards by letting you add or remove accessories without removing the guard. The system involves pairing screws with rectangular lock nuts set to a precise height (often found through trial and error) and inserting the complete assembly into the mounting slots. The two screws may share the same slot or bridge adjacent ones, offering flexibility on position. An allen wrench is then inserted through the bottom to actuate the screw heads and thereby turn the nuts about ninety degrees, hopefully clamping them to the interior plate and holding them as you continue tightening. Visual confirmation of nut position is important, but difficult in many positions. Once achieved, though, the mount is very tight and secure. The grip itself is somewhat narrower and arguably a touch shorter than its MOE forbear, and sports a rougher texture on the sides. The concave zone at the top is more pronounced, which combines with the narrower profile for a distinctly slimmer feel. I'd personally like to see a more "full-sized" version in the future, but for now this is the only MLOK vertical grip I can find. In any event, it works reasonably well for a variety of gripping styles, if not spectacularly for any one of them, so it's hard to complain.
Good for lightweight builds(30/06/2016)
A pain to install, it can and will damage poly handguards if one is not careful and tightens the screws too much. Lightweight, stable, and comfy though.
Awesome Vertical Grip(23/07/2017)
As of right now, this appears to be one of the only vertical grips that attatch directly to M-Lok compatible handguards. Installed easily into my V-Seven Weapon Systems M-Lok handguard. Very secure mounting system and slim enough to install under a low profile gas block. Looks very clean and fits flush with the handguard. The grip is fairly short, and aids in a thumb break grip and really helps with pulling the rifle into your shoulder during recoil. Very comfortable grip texture and lightweight at only 1.4oz in total. Great Magpul quality as usual. Thank you Brownells.
Mlok hardware junk (11/05/2018)
Followed the instructions grip was tighten on the mlok rail and it still had play. The vertical grip itself is fine it's the caming mlok t nuts that are junk. I'm switching them out with the standard reliable mount n slot hard ware.
Magpul M-Lok(21/06/2018)
I see guys on line doing video's for installing M-Lok items...Its super simple,adjust the screws like the instructions say...add a touch of blue lok-tight and tighten 15 foot pounds. Or remove the handguards and follow the instructions.
This grip is a little shorter than the Magpul non MOE...will leave your pinky finger wanting more room. But will do the job and will tighten down so well when you hit the ground, it will stay in place.*"*Plus the FACT standarf Magpul gear will not work on a weapon with Magpul MOE M-Lok slots...
The M-LoK slots on hand guards are bigger and wider than standard Magpul hand guards...FYI