Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Más...
Sólido y Ligero para Montar Visores y Otros Ópticos
La guía para montaje de visores estilo Weaver se adapta al contorno superior de todos los modelos Mossberg 500/590 y 835 para una instalación duradera y sin espacios. Sujeta por cuatro tornillos de máquina de 8-40 tpi que resisten el retroceso sin deformarse ni desgastarse. Mecanizada a partir de aluminio extruido ligero y anodizado para coincidir con los receptores Mossberg anodizados o pintados de negro. Acepta todos los montajes y accesorios para visores estilo Weaver.
ESPECIFICACIONES: Aluminio, acabado anodizado negro. 5” (12.7cm) de largo. 2 oz. (56.6g) de peso. Incluye (4) tornillos de montaje de 8-40 tpi. La instalación requiere perforar y roscar en los modelos antiguos de Mossberg 500.
Más...
Evaluaciones de clientes para HAVLIN MOSSBERG SCOPE RAIL
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
Rail great - Mossberg receiver marginal(24/06/2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03/09/2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!
N.º de producto: 100002901 HAVLIN MOSSBERG SCOPE RAIL Ref Fabricante: M500R8 La guía para montaje de visores estilo Weaver se adapta al contorno superior de todos los modelos Mossberg 500/590 y 835 para una instalación duradera y sin espacios. Sujeta por cuatro tornillos de máquina de 8-40 tpi que resisten el retroceso sin deformarse ni desgastarse. Mecanizada a partir de aluminio extruido ligero y anodizado para coincidir con los receptores Mossberg anodizados o pintados de negro. Acepta todos los montajes y accesorios para visores estilo Weaver.
La guía para montaje de visores estilo Weaver se adapta a los modelos Mossberg 500/590 y 835, asegurando una instalación duradera.
Fabricada en aluminio extruido anodizado negro, es ligera y resistente al retroceso.
Incluye cuatro tornillos de montaje de 8-40 tpi y puede requerir perforación y roscado en modelos más antiguos de Mossberg 500.
Atributos
Color:
Black
Estilo:
Tactical Bases
Hacer:
Mossberg
Material:
Aluminio
Modelo:
500,590,835
Numero de bases:
1-Piece
Peso de entrega: 0,045kgAltura de envío: 13mmAncho de envío: 66mmLongitud de envío: 145mm
Detalles del artículo
Hecho en USA
Mejora tu escopeta con la MOSSBERG 500/590/835 Scope Rail 🛠️. Fabricada en aluminio anodizado, ideal para visores estilo Weaver.
Solid & Lightweight For Mounting Scopes & Other Optics
Weaver-style scope mounting rail matches the top contour on all Mossberg 500/590 and 835 models for a durable, no-gap installation. Held by four, 8-40 tpi machine screws that stand up to recoil without deformation or stripping. Machined from lightweight, extruded aluminum, and anodized to match the anodized or black painted Mossberg receivers. Accepts all Weaver-style scope mounts and accessories.
SPECS: Aluminum, black, anodized finish. 5” (12.7cm) long. 2 oz. (56.6g) wt. Includes (4), 8-40 tpi mounting screws. Installation requires drilling and tapping on early model Mossberg 500.
Más...
Sólido y Ligero para Montar Visores y Otros Ópticos
La guía para montaje de visores estilo Weaver se adapta al contorno superior de todos los modelos Mossberg 500/590 y 835 para una instalación duradera y sin espacios. Sujeta por cuatro tornillos de máquina de 8-40 tpi que resisten el retroceso sin deformarse ni desgastarse. Mecanizada a partir de aluminio extruido ligero y anodizado para coincidir con los receptores Mossberg anodizados o pintados de negro. Acepta todos los montajes y accesorios para visores estilo Weaver.
ESPECIFICACIONES: Aluminio, acabado anodizado negro. 5” (12.7cm) de largo. 2 oz. (56.6g) de peso. Incluye (4) tornillos de montaje de 8-40 tpi. La instalación requiere perforar y roscar en los modelos antiguos de Mossberg 500.
Más...
Evaluaciones de clientes para HAVLIN MOSSBERG SCOPE RAIL
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
Rail great - Mossberg receiver marginal(24/06/2010)
- I used this rail to mount a 1-4 scope on a Mossberg 535 receiver using the pre-drilled & tapped holes. The fit and finish of the rail couldn't be better. - However, a caution. The rail to receiver screws are going to require some serious 'Loctite'. After 7 3" rifled slugs, the impact point started to shift greatly. At 10, none were on the paper. - All four rail mounting screws (that had been carefully torqued to 15 in lbs) had shot loose from the aluminum alloy receiver.
Lives Up to the Manufactuer's Promise!!(03/09/2010)
Great Accessory, especially for the price!! I bought & recieved this product, pronto!! No complaints so far. I installed the rail right when I got it and it was a quick, easy install (**need benchrest or something to rest gun on**, makes it easier).
I threw a BSA red-dot scope on my Tactical Mossberg 500 and put 50 rounds thru shotgun without any problems, then put an EOTECH sight on it and put another 50 rounds downrange. HOLY, MOLY!!! No problems yet to date.
Just screw the screws in tight, I didn't need Loc-Tite and your good to go. Its a must buy, you will not be let down. I PROMISE!!!