Replacing the factory double spring with one of these Single springs eliminates binding, improves function and reliability. Supplied with extra power firing pin spring. For use with factory, recoil spring guide rod only.
SPECS: Factory standard is 22 lb. recoil spring.
Más...
Reemplazar el muelle doble de fábrica por uno de estos muelles individuales elimina el atasco, mejora la función y la fiabilidad. Se suministra con un muelle de percutor de extra potencia. Solo para uso con la guía de muelle recuperador de fábrica.
ESPECIFICACIONES: El estándar de fábrica es un muelle recuperador de 22 lb.
Más...
Evaluaciones de clientes para WOLFF 22 LB. OFFICERS ACP SPRING
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,5
Not for full length guide rods(16/02/2011)
I cannot attest to the spring itself since I cannot install it. Although it certainly appears sturdy. I had a Wilson guide install on my Colt Officer's (I don't know why other than it was a good idea at the time.) In any case the spring is designed to work with a standard Colt recoil spring guide. No guide rods.
does not fit/work(18/07/2010)
According to Wolff's website this spring should work on a Springfield Ultra Compact, it doesn't.
I bought this spring to replace the existing recoil spring. I took the spring off my guid rod and only the big end of this fits on the guide rod. This spring is longer that the stock spring. I then can't get the buffer to compress all the way on the spring because the small end is way to small and won't let the guide rod pass through it to get through the bushing.
Good parts, needed fitting thought(07/03/2011)
I have a Springfield 1911 V10UC-ported Officers model with bull barrel, the spring did not fit as a drop-in part. I had to do some fitting to make it fit the plunger, no big deal I don't like sloppy a fit anyway. Fired the gun several hundred times without any issues, its much stiffer than the original spring but that maybe because the new spring is about 1 1/2 coils longer.
Terrible Performance(14/05/2012)
I purchased this spring to replace the OEM spring in a Colt MK IV Series 80 Officers ACP which I recently inherited. Prior to replacing the spring, the gun was having a failure to feed about once in every 20 to 25 shots. After installing this spring, the gun is experiencing failures to feed or eject about every 4 or 5 rounds. Even had one fired round jammed back into the chamber backwards! Rounds are ejecting so fast that they bounce around in the range stall like a ball in a pinball machine. I am also noticing that there's a lot more powder residue blowing back onto the rear of the slide. I'm guessing what they call a "Standard" spring is not nearly strong enough. I'll be contacting customer service to see if I can exchange for the 24# spring they have listed.
N.º de producto: 969423220 WOLFF 22 LB. OFFICERS ACP SPRING Ref Fabricante: 42322 Reemplazar el muelle doble de fábrica por uno de estos muelles individuales elimina el atasco, mejora la función y la fiabilidad. Se suministra con un muelle de percutor de extra potencia. Solo para uso con la guía de muelle recuperador de fábrica.
Hacer:
1911
Modelo:
Officers
Pounds:
22 lbs
Peso de entrega: 0,014kgAltura de envío: 13mmAncho de envío: 86mmLongitud de envío: 224mm
Detalles del artículo
Hecho en USA
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 969423240 WOLFF 24 LB. OFFICERS ACP SPRING Ref Fabricante: 42324 Reemplazar el muelle doble de fábrica por uno de estos muelles individuales elimina el atasco, mejora la función y la fiabilidad. Se suministra con un muelle de percutor de extra potencia. Solo para uso con la guía de muelle recuperador de fábrica.
Replacing the factory double spring with one of these Single springs eliminates binding, improves function and reliability. Supplied with extra power firing pin spring. For use with factory, recoil spring guide rod only.
SPECS: Factory standard is 22 lb. recoil spring.
Más...
Reemplazar el muelle doble de fábrica por uno de estos muelles individuales elimina el atasco, mejora la función y la fiabilidad. Se suministra con un muelle de percutor de extra potencia. Solo para uso con la guía de muelle recuperador de fábrica.
ESPECIFICACIONES: El estándar de fábrica es un muelle recuperador de 22 lb.
Más...
Evaluaciones de clientes para WOLFF 22 LB. OFFICERS ACP SPRING
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 2,5
Not for full length guide rods(16/02/2011)
I cannot attest to the spring itself since I cannot install it. Although it certainly appears sturdy. I had a Wilson guide install on my Colt Officer's (I don't know why other than it was a good idea at the time.) In any case the spring is designed to work with a standard Colt recoil spring guide. No guide rods.
does not fit/work(18/07/2010)
According to Wolff's website this spring should work on a Springfield Ultra Compact, it doesn't.
I bought this spring to replace the existing recoil spring. I took the spring off my guid rod and only the big end of this fits on the guide rod. This spring is longer that the stock spring. I then can't get the buffer to compress all the way on the spring because the small end is way to small and won't let the guide rod pass through it to get through the bushing.
Good parts, needed fitting thought(07/03/2011)
I have a Springfield 1911 V10UC-ported Officers model with bull barrel, the spring did not fit as a drop-in part. I had to do some fitting to make it fit the plunger, no big deal I don't like sloppy a fit anyway. Fired the gun several hundred times without any issues, its much stiffer than the original spring but that maybe because the new spring is about 1 1/2 coils longer.
Terrible Performance(14/05/2012)
I purchased this spring to replace the OEM spring in a Colt MK IV Series 80 Officers ACP which I recently inherited. Prior to replacing the spring, the gun was having a failure to feed about once in every 20 to 25 shots. After installing this spring, the gun is experiencing failures to feed or eject about every 4 or 5 rounds. Even had one fired round jammed back into the chamber backwards! Rounds are ejecting so fast that they bounce around in the range stall like a ball in a pinball machine. I am also noticing that there's a lot more powder residue blowing back onto the rear of the slide. I'm guessing what they call a "Standard" spring is not nearly strong enough. I'll be contacting customer service to see if I can exchange for the 24# spring they have listed.