Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

MAGPUL
REM 700 SA HUNTER STOCK ADJUSTABLE

840815100751 100016646

Made from reinforced polymer and a machine finished, anodized A380 cast aluminum bedding block, the Magpul Remington 700 Hunter Stock offers users enhanced ergonomics and optional adjustable length of pull and comb height with the Magpul SGA Recoil Pad Adapter and Magpul SGA Cheek Riser Kit, both sold seperately. Compatible with all Remington 700 Short Actions, this stock requires no bedding and is a true “drop-in” solution for the end user. This stock is also M-LOK compatible to accept a broad range of accessories. Also available seperately is the Bolt Action Magazine Well, which allows the rifle to be used with detachable box magazines without the need for custom inletting.

Más...

Fabricada con polímero reforzado y un bloque de anclaje de aluminio anodizado A380 acabado a máquina, la culata Magpul Remington 700 Hunter ofrece a los usuarios una ergonomía mejorada y la opción de ajustar la longitud de la culata y la altura del peine con el Magpul SGA Recoil Pad Adapter y el Magpul SGA Cheek Riser Kit, ambos se venden por separado. Compatible con todas las Acciones Cortas Remington 700, esta culata no requiere bedding y es una solución "drop-in" real para el usuario final. Esta culata también es compatible con M-LOK para aceptar una amplia gama de accesorios. También disponible por separado está el Bolt Action Magazine Well, que permite usar el rifle con cargadores extraíbles sin necesidad de inletting personalizado.

Más...

Evaluaciones de clientes para MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA ODG

Número de evaluaciones: 13
De brownells.com: 13
Evaluación media: 4,4

I Love O.D. Green (20/02/2017)

A good looking low cost replacement stock for heavy barrel Remington 700s. I first tried it with my Remington VTR and that was a mistake. The fat round target/varmint barrels fit and look real nice in this stock. I ended up using a new 700 Varmint ADL. The only issue or problem I found was the original action screws are short for this stock especially the front one. I ordered a new Remington factory rear action screw from Brownell's part # 767-000-051. The rear screw is the same thread pitch as the front one and is longer. I cut and filed it to fit which gave more thread contact and a more secure hold in the front near the recoil lug. Also If you plan to use an aftermarket trigger with this MAGPUL stock do yourself a favor and buy the one made by TriggerTech (Brownell's part # 100-018-029).

M-Lok device installs are a challege. (08/04/2018)

Installing M-Lok devices in this stock are a challenge due to the blind/trapped cavities in which they are placed. If the T-nuts arenât seated perfectly before tightening, they will spin and chew away at the cavity lip.

Perfect (29/03/2016)

This is a great upgrade to original Rem stock. Love the adjustable LOP and adjustable cheek riser. Very solid stock and do like the forend girth over the slim profile of the original. Great job Magpul!

Disappointed (25/01/2017)

First, let me say this is a very nice stock for a varmint or medium/heavy barrel Remington 700 SA. I purchased this stock in FDE to install on a .243 BDL with the standard contour sporter barrel. It was part of a kit with bottom metal and 10 round magazines. The action fit the stock but the action screws were too short. No problem. Ordered the longer action screws. The installed action left the sportier barrel with a very large gap between the barrel and fore end. I returned the unit. It would work fine on a heavy barrel SPS or the fluted barrel version. Just doesn't look right with the sporter barrel contour

Second the previous review (27/04/2018)

The previous review was spot on. Order a longer rear action screw and cut to length for the front. Also the barrel channel is for a heavy varmint contour barrel.

GOOD! (09/11/2015)

Got this product recently, install was a breeze. Saw this at the magpul booth at SHOTSHOW 2015 and fell in love. Good alternative to expensive magazine accepting chasis. Ill be receiving my magazine well part this thursday. This beats the garbage houge stock my Rem 700 came with. 0 feed problems so far.

Love it! (23/11/2015)

Love this stock! I installed it on a Remington 700 SPS tactical .308 (same rifle shown in the stock photo for the black stock). It doesn't specify in the description but the barrel is free-floated with this stock in addition to the aluminum action bedding block that's built in. It used the factory action screws for installation and feels rock solid. The stock feels great, looks great, and took all of 5 minutes to install. I'll be really excited once they finally ship the back-ordered bottom metal that accepts the AICS mags.

Yes - Drop-In Solution (01/12/2015)

Great stock!!! I was worried about the âtrue drop-in solutionâ but it really was. I had no problems at all. I also got the magazine well and magazine. It was a truly a âdrop-in solutionâ. Changed out the cheek piece and added an insert for my bipod.

Overall very pleased (13/01/2016)

Overall great stock but needed a little improvement. I purchased the stock, along with the magazine well and extra magazines, plus various M-Loc fittings for bipod mounting and quick detach sling swivels. My Remington 700 AAC-SD in .308 Winchester fit into it perfectly. The standard cheek piece seems perfect for using my Vortex 6-24X50 scope mounted with medium high rings.

The HARD rubber butt pad was very painful to use on the bench rest. Even at over 11 pounds total weight, the gun has more felt recoil than I expected. That, coupled with the very narrow footprint of the existing but plate, made an extended range session very painful. There is a solution. Brownells sells the adaptor to replace the adjustable butt plate with one designed to fit the Magpul stock for the Remington 870. This adapter accepts a standard ready fit recoil pad designed the fit the synthetic Remington factory stocks for the 870 and the 700. This adapter, Brownells 100-009-579, will fit the Hunter 700 stock. I installed the Limbsaver recoil pad which is very soft and has a much larger footprint to spread the recoil to the shoulder. Shooting the rifle is now much more pleasant. Other than the recoil pad, there is nothing about this stock that I do now like.

Great inexpensive alternative (19/01/2016)

Inexpensive alternative that works great! Easy to install and set up right out of the box. The ability to add the bottom metal to take magazines is outstanding. Also the M-Lock accessories that can be used with it are great. I put it on and went straight out in the woods of deepest darkest Fort Bragg with it, held up great.

The only draw back they could have put some rubber in the grip areas.

Great improvement over the factory stock (12/02/2016)

I received my stock along with new hardware and mag conversion as part of my order that I placed and installation was a ten minute or less operation. No fitting required and overall, I am please. The mag conversion kit fit with no issues and feeding rounds is smooth and consistent, which is an improvement over the previous kit that I had. Though I wanted the OD Green stock, I am please with the black and will order the OD Green one for a future build once it is available.

Remington 700 Hunter (30/08/2017)

I bought this stock for my Remington SPS Sport Tactical in.308 and also added the bottom metal to use 5 round mags because I didn't like the Hogue stock that came with my rifle. Installation was a very easy and needed no extra screws or parts. I took it to the range a week later and found that this stock out performed the old stock ð¯ %! I love it! If you're looking to upgrade your Remington 700 I would highly recommend buying this product. You can spend more money on others but you won't find anything better than this one!!! The only accessory that I added was the extra stud for my bipod and that also works great.

M-Lok device installs are a challenge (08/04/2018)

Leer 13 mas calificaciones en brownells.com

369.9 369.9 4 EUR

New

N.º de producto: 100016646
MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA ODG
Ref Fabricante: MAG495-ODG 840815100751 Fabricada con polímero reforzado y un bloque de anclaje de aluminio anodizado A380 acabado a máquina, la culata Magpul Remington 700 Hunter ofrece a los usuarios una ergonomía mejorada y la opción de ajustar la longitud de la culata y la altura del peine con el Magpul SGA Recoil Pad Adapter y el Magpul SGA Cheek Riser Kit, ambos se venden por separado. Compatible con todas las Acciones Cortas Remington 700, esta culata no requiere bedding y es una solución "drop-in" real para el usuario final. Esta culata también es compatible con M-LOK para aceptar una amplia gama de accesorios. También disponible por separado está el Bolt Action Magazine Well, que permite usar el rifle con cargadores extraíbles sin necesidad de inletting personalizado.

369.9 EUR 16 369,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: O.D. Green Estilo: Ajustable, Short Hacer: Remington Material: Polymer Modelo: 700 Tipo de accion: Short

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

La culata Magpul Remington 700 Hunter está hecha de polímero reforzado con un bloque de anclaje de aluminio anodizado.
Es compatible con todas las Acciones Cortas Remington 700 y no requiere bedding, siendo una solución "drop-in".
Ofrece la opción de ajustar la longitud de la culata y la altura del peine con accesorios vendidos por separado, y es compatible con M-LOK para múltiples accesorios.

Atributos

Color: O.D. Green Estilo: Ajustable,Short Hacer: Remington Material: Polymer Modelo: 700 Tipo de Acción: Short Peso de entrega: 1,905kg Altura de envío: 76mm Ancho de envío: 165mm Longitud de envío: 919mm UPC : 840815100751

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1

New

N.º de producto: 100016643
MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA BLACK
Ref Fabricante: MAG495-BLK 840815100720 Fabricada con polímero reforzado y un bloque de anclaje de aluminio anodizado A380 acabado a máquina, la culata Magpul Remington 700 Hunter ofrece a los usuarios una ergonomía mejorada y la opción de ajustar la longitud de la culata y la altura del peine con el Magpul SGA Recoil Pad Adapter y el Magpul SGA Cheek Riser Kit, ambos se venden por separado. Compatible con todas las Acciones Cortas Remington 700, esta culata no requiere bedding y es una solución "drop-in" real para el usuario final. Esta culata también es compatible con M-LOK para aceptar una amplia gama de accesorios. También disponible por separado está el Bolt Action Magazine Well, que permite usar el rifle con cargadores extraíbles sin necesidad de inletting personalizado.

369.9 EUR 18 369,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Ajustable, Short Hacer: Remington Material: Polymer Modelo: 700 Tipo de accion: Short

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

New

N.º de producto: 100016644
MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA FDE
Ref Fabricante: MAG495-FDE 840815100737 Fabricada con polímero reforzado y un bloque de anclaje de aluminio anodizado A380 acabado a máquina, la culata Magpul Remington 700 Hunter ofrece a los usuarios una ergonomía mejorada y la opción de ajustar la longitud de la culata y la altura del peine con el Magpul SGA Recoil Pad Adapter y el Magpul SGA Cheek Riser Kit, ambos se venden por separado. Compatible con todas las Acciones Cortas Remington 700, esta culata no requiere bedding y es una solución "drop-in" real para el usuario final. Esta culata también es compatible con M-LOK para aceptar una amplia gama de accesorios. También disponible por separado está el Bolt Action Magazine Well, que permite usar el rifle con cargadores extraíbles sin necesidad de inletting personalizado.

369.9 EUR 17 369,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Flat Dark Earth Estilo: Ajustable, Short Hacer: Remington Material: Polymer Modelo: 700 Tipo de accion: Short

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

New

N.º de producto: 100016645
MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA GRAY
Ref Fabricante: MAG495-GRY 840815100744 Fabricada con polímero reforzado y un bloque de anclaje de aluminio anodizado A380 acabado a máquina, la culata Magpul Remington 700 Hunter ofrece a los usuarios una ergonomía mejorada y la opción de ajustar la longitud de la culata y la altura del peine con el Magpul SGA Recoil Pad Adapter y el Magpul SGA Cheek Riser Kit, ambos se venden por separado. Compatible con todas las Acciones Cortas Remington 700, esta culata no requiere bedding y es una solución "drop-in" real para el usuario final. Esta culata también es compatible con M-LOK para aceptar una amplia gama de accesorios. También disponible por separado está el Bolt Action Magazine Well, que permite usar el rifle con cargadores extraíbles sin necesidad de inletting personalizado.

369.9 EUR 6 369,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Gray Estilo: Ajustable, Short Hacer: Remington Material: Polymer Modelo: 700 Tipo de accion: Short

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu experiencia de tiro con la culata ajustable Magpul Hunter 700 para Remington 700 SA. 🛠️ Ergonomía y personalización al alcance.

Más...

Evaluaciones de clientes para MAGPUL HUNTER 700 ADJUSTABLE STOCK FOR REMINGTON 700 SA ODG

Número de evaluaciones: 13
De brownells.com: 13
Evaluación media: 4,4

I Love O.D. Green (20/02/2017)

M-Lok device installs are a challege. (08/04/2018)

Perfect (29/03/2016)

Disappointed (25/01/2017)

Second the previous review (27/04/2018)

The previous review was spot on. Order a longer rear action screw and cut to length for the front. Also the barrel channel is for a heavy varmint contour barrel.

GOOD! (09/11/2015)