Más de 300,000 clientes - ¡les damos las gracias!

40,000+ productos para caza y deportes de tiro

878405004264 100022971
Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.

SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.

* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.

84.9 169.9 6 EUR
N.º de producto: 100022971
MESA TACTICAL PRODUCTS SURESHELL POLYMER CARRIER REM 870 1100 11-87 12GA 6 RD
Ref Fabricante: 94740 878405004264
84.9 EUR 7 84,90 € *
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas: Calibre: 12 Gauge Capacidad: 6-Round Estilo: Ammo Carrier

Atributos

Calibre: 12 Gauge Capacidad: 6-Round Estilo: Ammo Carrier Peso de entrega: 0,227kg Altura de envío: 25mm Ancho de envío: 102mm Longitud de envío: 318mm UPC : 878405004264

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es




N.º de producto: 100019757
MESA TACTICAL PRODUCTS SURESHELL POLYMER CARRIER & SADDLE REMINGTON 870 12 GA 6RD
Ref Fabricante: 94830 878405004356
169.9 EUR 3 169,90 € *
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas: Calibre: 12 Gauge Capacidad: 6-Round Estilo: Side Mount
N.º de producto: 100019760
MESA TACTICAL PRODUCTS SURESHELL POLYMER CARRIER & RAIL BENELLI M4 12GA 6RD
Ref Fabricante: 94930 878405004479
154.9 EUR 5 154,90 € *
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas: Calibre: 12 Gauge Capacidad: 6-Round Estilo: Side Mount
N.º de producto: 100019759
MESA TACTICAL PRODUCTS SURESHELL POLYMER CARRIER & RAIL BEN SUPERNOVA 12GA 6RD
Ref Fabricante: 94920 878405004462
134.9 EUR 2 134,90 € *
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas: Calibre: 12 Gauge Capacidad: 6-Round Estilo: Side Mount
N.º de producto: 100019755
MESA TACTICAL PRODUCTS SURESHELL POLYMER CARRIER MOSSBERG 930 12GA 6RD
Ref Fabricante: 94760 878405004288
99.9 EUR 0 99,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Calibre: 12 Gauge Capacidad: 6-Round Estilo: Side Mount
N.º de producto: 100019754
MESA TACTICAL PRODUCTS SURESHELL CARRIER MOSSBERG 500/590/MAVERICK 12GA 6RD POLYMER
Ref Fabricante: 94750 878405004271
114.9 EUR 0 114,90 € *
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas: Calibre: 12 Gauge Capacidad: 6-Round Estilo: Side Mount

¡Optimiza tu carga con el SURESHELL Polymer Shotshell Carrier! 🎯 Capacidad de 6 rondas para tu Rem 870, 1100 y 11-87 de 12GA.

Carry more ammunition “at the ready”: Professional operators who are unwilling to sacrifice quality, performance, and durability, will find Mesa Tactical’s polymer shotshell carriers to be an especially attractive and economical alternative to the low-cost consumer grade plastic shell holders offered by competitors. SureShell® Polymer Shotshell Carriers are made from durable, impact resistant polymer. This shotshell carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Some SureShell carriers include high temperature adhesive backed, die-cut rubber gaskets to protect the host shotgun’s finish. The Sureshell receiver mounting system for Remington 870, 1100 and 11-87 shotguns uses a combination of steel fasteners threaded into a steel pin (at the rear) and paired Chicago screws (up front) for more secure attachment to the shotgun without the risk of pinching the receiver. The mounting plate even features a window over the shotgun serial number location, to make it easier for armorers to inventory their weapons. Models are available with and without integral Picatinny rails for mounting optics. Like all SureShell carriers, the new polymer SureShell shotshell carriers work well in all climates and environments, and are designed to withstand the daily use and abuse to which arsenal weapons are commonly subjected. This system securely holds shells in place until needed at which time they are readily accessible and easily removed for rapid reloading.

SPECS: Injection molded from glass filled polymer, lightweight aluminum backplate, matte black. For 12 gauge only. All models include mounting hardware, rubber gasket, and installation instructions. Right Hand models only. Remington Sidemount fits models 870/1100/11-87 (may require modification to gun). Rem 6-Round Sidemount – 6¼” (15.8cm) long x 1½” high. 5.4 oz. (152g) wt. Rem 8-Round Sidemount – 7¾” (19.7) long x 1½” high. 7 oz. (200g) wt. Remington Picatinny fits models 870/1100/11-87 (may require modification to gun). 7” (15.8cm) long x 2½” (6.3cm) high. 7.6 oz. (215g) wt. Mossberg fits models 500/590. 6-round ony. 6-3⁄8" (16.2cm) long x 1-3⁄8" (3.5cm) high. 5.2 oz. (147g) wt.Benelli Sidemount fits M1/M2/M3. Benelli 6-Round Sidemount – 6” (15.2cm) long x 2½” high. 6.3 oz. (179g) wt. Benelli Picatinny available for M2 (requires drilling tapping receiver to fit M1), M4/M1014, and Supernova. Benelli M2 6-Round Picatinny – 6” long x 2 (5.1cm)” high. 7.4 oz. (210g) wt. Benelli M4/M1014 6-Round Picatinny – 6” long x 2” (5.1cm) high. 7.5 oz. (213g) wt.

* Requires use of shorter forend on Rem 870.
+ Requires minor forend alterations to fit Rem 1100/11-87.
** Requires drilling/tapping receiver to fit M1.

0
En stock
69,90 €
0
En stock
59,90 €
0
No disponible
21,90 €
0
Reordenado
16,90 €
Volver arriba