Applies More Pressure To Follower For Smooth Feeding From Extended Magazines
Extra-length magazine spring replaces factory-supplied spring for use with aftermarket magazine extenders and extended base pads that increase round capacity. Gives follower up to 10% more power for smooth, reliable feeding of rounds. Made of certified aerospace-spec chrome silicon wire, then heat-treated and stress-relieved to ISO 9000 standards.
SPECS: Chrome silicon steel wire. Fits S&W M&P pistols chambered in 9mm, .40 S&W, and .357 SIG.
Más...
Aplica Más Presión Al Seguidor Para Una Alimentación Suave Desde Cargadores Extendidos
El muelle del cargador de longitud extra reemplaza el muelle suministrado de fábrica para su uso con extensores de cargador de terceros y almohadillas de base extendidas que aumentan la capacidad de rondas. Otorga al seguidor hasta un 10% más de potencia para una alimentación suave y confiable de las rondas. Fabricado con alambre de silicio cromado certificado para la industria aeroespacial, luego tratado térmicamente y aliviado de estrés según los estándares ISO 9000.
ESPECIFICACIONES: Alambre de acero de silicio cromado. Compatible con pistolas S&W M&P calibradas en 9mm, .40 S&W y .357 SIG.
Más...
Evaluaciones de clientes para BROWNELLS S&W M&P EXTRA POWER MAG SPRING
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 4,7
Fits my M&P 9 10 round magazine(08/05/2011)
These are great springs. I could not find any springs specifically for the 10-round magazine for my M&P 9 so I bought these, hoping I could make them fit. They fit perfectly and they work even better then the stock springs. These springs do not hook into the hole on the magazine follower, but I do not see this as a problem.[...]
Thank goodness(14/09/2013)
Since S&W has, for whatever reason, chosen to leave us M&P users high and dry I had to find used mags that needed spring replacement. Thanks Brownells for this quality product. The used mags now function like the factory new mags.
better than the factory!(20/09/2014)
I have been using these for the extended 45mags for a few months now and have had good results. The factory springs were designed poorly and with the taper would it would impinge on itself then bind up and become useless and it was almost impossible to get the 14th rnd in. These are more of a solid design and won't bind on themselves. I have had issue with the mags not actuating the slide catch on the last round and failing to lock back but it is still better than the factory ones binding half way through a mag. (Note: The description can be deceiving when it says high capacity. I don't think they were intended for the 14rnd 45 mags but they do work better than the factory)
N.º de producto: 078000168 BROWNELLS S&W M&P EXTRA POWER MAG SPRING050806003569 El muelle del cargador de longitud extra reemplaza el muelle suministrado de fábrica para su uso con extensores de cargador de terceros y almohadillas de base extendidas que aumentan la capacidad de rondas. Otorga al seguidor hasta un 10% más de potencia para una alimentación suave y confiable de las rondas. Fabricado con alambre de silicio cromado certificado para la industria aeroespacial, luego tratado térmicamente y aliviado de estrés según los estándares ISO 9000.
11.9EUR911,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Hacer: Smith & WessonModelo: M&PCantidad: 1
Reemplaza el muelle de fábrica para su uso con extensores de cargador y almohadillas de base extendidas, aumentando la capacidad de rondas.
Fabricado con alambre de silicio cromado certificado para la industria aeroespacial, tratado térmicamente y aliviado de estrés según los estándares ISO 9000.
Compatible con pistolas S&W M&P calibradas en 9mm, .40 S&W y .357 SIG.
Atributos
Hacer:
Smith & Wesson
Modelo:
M&P
Peso de entrega: 0,009kgAltura de envío: 13mmAncho de envío: 71mmLongitud de envío: 231mm
UPC
: 050806003569
Detalles del artículo
Hecho en USA
Mejora tu S&W M&P con el muelle extra-power de Brownells. ✨ Aumenta la capacidad y asegura una alimentación confiable en tus rondas.
Applies More Pressure To Follower For Smooth Feeding From Extended Magazines
Extra-length magazine spring replaces factory-supplied spring for use with aftermarket magazine extenders and extended base pads that increase round capacity. Gives follower up to 10% more power for smooth, reliable feeding of rounds. Made of certified aerospace-spec chrome silicon wire, then heat-treated and stress-relieved to ISO 9000 standards.
SPECS: Chrome silicon steel wire. Fits S&W M&P pistols chambered in 9mm, .40 S&W, and .357 SIG.
Más...
Aplica Más Presión Al Seguidor Para Una Alimentación Suave Desde Cargadores Extendidos
El muelle del cargador de longitud extra reemplaza el muelle suministrado de fábrica para su uso con extensores de cargador de terceros y almohadillas de base extendidas que aumentan la capacidad de rondas. Otorga al seguidor hasta un 10% más de potencia para una alimentación suave y confiable de las rondas. Fabricado con alambre de silicio cromado certificado para la industria aeroespacial, luego tratado térmicamente y aliviado de estrés según los estándares ISO 9000.
ESPECIFICACIONES: Alambre de acero de silicio cromado. Compatible con pistolas S&W M&P calibradas en 9mm, .40 S&W y .357 SIG.
Más...
Evaluaciones de clientes para BROWNELLS S&W M&P EXTRA POWER MAG SPRING
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 4,7
Fits my M&P 9 10 round magazine(08/05/2011)
These are great springs. I could not find any springs specifically for the 10-round magazine for my M&P 9 so I bought these, hoping I could make them fit. They fit perfectly and they work even better then the stock springs. These springs do not hook into the hole on the magazine follower, but I do not see this as a problem.[...]
Thank goodness(14/09/2013)
Since S&W has, for whatever reason, chosen to leave us M&P users high and dry I had to find used mags that needed spring replacement. Thanks Brownells for this quality product. The used mags now function like the factory new mags.
better than the factory!(20/09/2014)
I have been using these for the extended 45mags for a few months now and have had good results. The factory springs were designed poorly and with the taper would it would impinge on itself then bind up and become useless and it was almost impossible to get the 14th rnd in. These are more of a solid design and won't bind on themselves. I have had issue with the mags not actuating the slide catch on the last round and failing to lock back but it is still better than the factory ones binding half way through a mag. (Note: The description can be deceiving when it says high capacity. I don't think they were intended for the 14rnd 45 mags but they do work better than the factory)