Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

M4 SKINNY STYLE CARBINE HANDGUARD

841348100201 100004515

Rugged, Drop-In Replacement For M4-Style Factory Handguard

Snap-on USGI-type replacement for your carbine’s factory-original handguard is made of tough, fiberglass-reinforced, injection-molded polymer that delivers superior impact and abrasion resistance. The ridged gripping surface and top/bottom vent holes retain the weapon’s authentic military look, while an internal heat shield of lightweight aluminum protects your hand from barrel heat. Skinny models have standard-issue single-layer heat shield on upper and lower handguard. Skinny M4 model has narrower diameter for operators who prefer a minimal bulk handguard. Fits AR-15/M16/M4 with carbine-length gas system.

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Más...

Reemplazo Resistente y de Ajuste Directo para la Guardamanos Estilo M4

Reemplazo tipo USGI de ajuste directo para la guardamanos original de tu carabina, hecho de polímero moldeado por inyección reforzado con fibra de vidrio que ofrece una resistencia superior al impacto y la abrasión. La superficie de agarre estriada y los orificios de ventilación superior/inferior conservan el aspecto militar auténtico del arma, mientras que un escudo térmico interno de aluminio ligero protege tu mano del calor del cañón. Los modelos Skinny tienen un escudo térmico de una sola capa estándar en la guardamanos superior e inferior. El modelo Skinny M4 tiene un diámetro más estrecho para operadores que prefieren una guardamanos de menor volumen. Compatible con AR-15/M16/M4 con sistema de gas de longitud de carabina.

ESPECIFICACIONES: Polímero reforzado con fibra de vidrio, negro mate. 6½” (16.5cm) de largo. Skinny – Aprox. 2¼” de diámetro exterior en la parte trasera que se estrecha a 2” (5.1cm) de diámetro exterior en el frente. Solo un escudo térmico.

Más...

Evaluaciones de clientes para DOUBLE STAR SKINNY M4 CARBINE HANDGUARD

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 5

I would buy these again (11/05/2013)

Good Quality,color matched my rifle perfect,fit with no triming,I would buy these again and recomend them to customers

Highly Recommended (05/07/2013)

Simple - it fits, it looks good, it feels good and the price can't be beat !!! Thanks Brownells

For a better small hand fit (28/05/2014)

These grips are perfect for people like me that have smaller hands The feel is just right. They come in handy for younger shooters too who feel more comfortable being able to wrap more of their hands around them. They really do give better control. Have them on all of my AR style rifles. Lastly, they go on real easy.

Great handguards (21/04/2015)

Used these to replace the factory handguards on my Ruger AR-556 so I could add a rail and foregrip. Worked great and looks nice, too. Very happy!

<img width="500" src='/userdocs/reviewimages/791c1e79-8272-4ac8-b7eb-5982a9c71a2b.jpg' alt=''>

Great replacement handguard (05/10/2015)

Excellent replacement for oversized, double-heatshield handguards now used on Colt CAR-15s. These are a near perfect match for the original slim handguards that used to come standard on Colt CAR rifles. They are much easier to grip than the larger style. Great quality.

Great product but does not fit Bushmaste (03/11/2015)

I noted that one of the reviewers talked bout fitness issue for Bushmaster. But, I still placed order and received the product within only 3 business days. Fast delivery, great quality, beautiful appearance, it does not fit Bushmaster directly on the large end. But, it is not a big deal. I spent only one hour with basic hand tools modifying the lip structure slightly. Then, it fitted in almost perfectly without any noticeable issue. Satisfied completely. I am very handy, but I still believe anybody can get the project done with maybe a little longer time.

Excellent - will buy again (20/07/2016)

Tight, solid fit. Seams line up perfectly. Doesn't flex, move or give when handled. I purchased one because I needed it. After that I purchased two more just to replace a couple of cheapy ones I was using. Highly recommend, excellent. I'm going to keep my eye on this brand as I look for other items.

Great Handguard, with a little fitting (28/06/2017)

Had to sand down ever so slightly the end that went into the delta ring. After install, was good snug fit. Looks great on my two LMTs

Worth Much More ! (18/06/2018)

I have a PSA A4 upper that came with PSA's hand guards which are odd at best. They are oval in shape, not round, and are quite large (fat). I ordered these skinny hand guards, but to be honest I wasn't expecting much due to the low cost. I'm glad I took the chance because they popped on with zero issues or difficulty. They seem quite well made, no squeak/wiggle etc. I plan on ordering another pair to keep on the shelf for a future build.

Great and unbelievable low price (04/07/2018)

Never put one on before. Had top rotated a little and didn't notice. Seemed to fit about 95% but after looking at it, a slight 1/16" twist let it lock into place perfectly. Looks great on my Colt 6720 and if you didn't have my 6721 or Lightweight Sporter there beside it, you'd not notice any difference from OEM. Way better than the double heat shield stock unit.

Leer 10 mas calificaciones en brownells.com

23.9 23.9 1 EUR

N.º de producto: 100004515
DOUBLE STAR SKINNY M4 CARBINE HANDGUARD
Ref Fabricante: AR414 841348100201 Reemplazo tipo USGI de ajuste directo para la guardamanos original de tu carabina, hecho de polímero moldeado por inyección reforzado con fibra de vidrio que ofrece una resistencia superior al impacto y la abrasión. La superficie de agarre estriada y los orificios de ventilación superior/inferior conservan el aspecto militar auténtico del arma, mientras que un escudo térmico interno de aluminio ligero protege tu mano del calor del cañón. Los modelos Skinny tienen un escudo térmico de una sola capa estándar en la guardamanos superior e inferior. El modelo Skinny M4 tiene un diámetro más estrecho para operadores que prefieren una guardamanos de menor volumen. Compatible con AR-15/M16/M4 con sistema de gas de longitud de carabina.

23.9 EUR 294 23,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Smooth Hacer: AR-15 Longitud: 6 Material: Polymer Tipo: Drop-In

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Guardamanos de reemplazo tipo USGI para carabinas AR-15/M16/M4, hecho de polímero reforzado con fibra de vidrio para mayor resistencia.
Diseño Skinny con escudo térmico de una sola capa y diámetro más estrecho, ideal para operadores que prefieren menor volumen.
Compatible con sistemas de gas de longitud de carabina y ofrece una superficie de agarre estriada con orificios de ventilación.

Atributos

Color: Black Estilo: Smooth Hacer: AR-15 Longitud: 6 Material: Polymer Tipo: Drop-In Peso de entrega: 0,136kg Altura de envío: 58mm Ancho de envío: 58mm Longitud de envío: 185mm UPC : 841348100201

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.y.1

Mejora tu AR-15 con el guardamanos Skinny de DOUBLE STAR. ✨ Resistente y ligero, perfecto para un agarre cómodo y un look militar auténtico.

Rugged, Drop-In Replacement For M4-Style Factory Handguard

SPECS: Fiberglass-reinforced polymer, matte black. 6½” (16.5cm) long. Skinny – Approx. 2¼” O.D. at rear tapering to 2” (5.1cm) O.D. at front. Single heat shield only.

Más...

Reemplazo Resistente y de Ajuste Directo para la Guardamanos Estilo M4

Más...