Mejora tu tiro con la palanca de liberación T3 para el 10/22® de Ruger. 🎯 Diseño ergonómico y fácil de usar. ¡Hazlo tuyo!
CROSSFIRE SHOOTING GEAR10/22® T3 MAGAZINE RELEASE - CROSSFIRE SHOOTING GEAR T3 MAGAZINE RELEASE LEVER
812254022277100006639
Top takeaways
La palanca extendida permite soltar el cargador sin cambiar el agarre o la posición de tiro, activándose fácilmente con el dedo del gatillo.
Diseñada ergonómicamente y moldeada de polímero ligero y duradero, evita la liberación accidental del cargador.
Especificaciones: polímero moldeado por inyección, color negro mate, 2½" (6.3cm) OAL, 15⁄8" (4.1cm) longitud del brazo de la palanca, 11⁄8" (2.8cm) ancho del pad para el pulgar.
Atributos
Modelo:10/22
Tipo de arma:Ruger
Peso de entrega:0,027kg
Altura de envío:8mm
Ancho de envío:117mm
Longitud de envío:150mm
UPC:812254022277
Detalles del artículo
Clasificación de exportación de EE. UU.: 0A501.x
Especificaciones:
Hacer: Ruger
Modelo: 10/22
42.942.91EUR
42.9EUR42,90 €
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.
N.º de producto: 100006639
N.º fabr.: CRF-R1022MRL
812254022277 La palanca extendida tiene una almohadilla para los dedos amplia y ambidiestra que te permite soltar el cargador sin cambiar tu agarre o posición de tiro. Se activa fácilmente solo con el dedo índice, así que puedes soltar el cargador sin torpezas. Diseñada para no liberar el cargador cuando se golpea accidentalmente. Con forma ergonómica, moldeada de un polímero ligero pero duradero. Ajuste tipo drop-in.
Extended lever has a wide, ambidextrous finger pad to allow you to drop the mag without changing your grip or shooting position. Activates easily with just the trigger finger, so you can drop the magazine without fumbling. Engineered not to release the magazine when accidentally bumped. Ergonomically shaped, molded from lightweight yet durable polymer. Drop-in fit.
Te Permite Soltar El Cargador Sin Romper Tu Agarre
La palanca extendida tiene una almohadilla para los dedos amplia y ambidiestra que te permite soltar el cargador sin cambiar tu agarre o posición de tiro. Se activa fácilmente solo con el dedo índice, así que puedes soltar el cargador sin torpezas. Diseñada para no liberar el cargador cuando se golpea accidentalmente. Con forma ergonómica, moldeada de un polímero ligero pero duradero. Ajuste tipo drop-in.
Top takeaways
La palanca extendida permite soltar el cargador sin cambiar el agarre o la posición de tiro, activándose fácilmente con el dedo del gatillo.
Diseñada ergonómicamente y moldeada de polímero ligero y duradero, evita la liberación accidental del cargador.
Especificaciones: polímero moldeado por inyección, color negro mate, 2½" (6.3cm) OAL, 15⁄8" (4.1cm) longitud del brazo de la palanca, 11⁄8" (2.8cm) ancho del pad para el pulgar.
Atributos
Modelo:10/22
Tipo de arma:Ruger
Peso de entrega:0,027kg
Altura de envío:8mm
Ancho de envío:117mm
Longitud de envío:150mm
UPC:812254022277
Detalles del artículo
Clasificación de exportación de EE. UU.: 0A501.x
Opiniones de clientes
Calificaciones de clientes (8)
4,8 / 5
Claramente recomendable
Easy install 16/10/2016
I installed one in my Ruger Charger and I am very happy. Fit was drop in no problem ,great fit ,easy to operate .
Claramente recomendable
Outstanding Upgrade 11/07/2016
Installed this on a 10/22 used occasionally for Steel Challenge competition. This is maybe the best upgrade you can make to a 10/22 that needs to be reloaded often and relatively quickly, especially considering the price.
Some may say it's not the flashiest mag release available and they'd be right. But for folks who are more concerned with function over form it's perfect. The mags lock in tight, both BX-1's and BX-25's, and drop free with the push of your index finger. It does not get in the way of or interfere with the regular function of the rifle in any way.
In the end this is a five star, two thumbs up product...
Claramente recomendable
Excellent, fast with all stocks 08/02/2013
Put it on my 10/22 with a pistol grip stock (Blackhawk). The Tactical Solutions release which I had on the gun in the factory stock didn't leave my fingers any room to work it! I love the TacSol release, but not on that stock.
Installed the PWS release, now the operation is the same as dropping the mag on my AK with a Power Custom magazine release. My only complaint is that the edges are a little bit sharp.
Claramente recomendable
The Best Choice 07/05/2012
I looked at a lot of other mag releases and opted for this one for several reasons. First, it places the release at your fingertips where it belongs. Second, it is a stronger design because most of the other ones are long and thin, creating a "perfect storm" for breaking them, especially in a competition environment where the adrenaline is flowing. Third, the polymer is just plain indestructible. Throw in the fact that the price is less expensive than most other choices, and it's a no-brainer.
Claramente recomendable
Good fit and function 17/01/2012
Drops right in. Fits nicely around trigger guard and looks great. I really like the widen portion that allows for easy 1 handed release. Only set back is it makes it hard to actuate bolt catch, especially with gloves on, but its nothing I can't live with.
Recomendable
Affordable & Fast 15/10/2011
This is a great item if you're looking to improve your magazine reload time. Magazine drops free every time even when empty on my standard 10/22 carbine. Conforms nicely to the trigger housing. Ambidextrous. Easy to install: unload rifle, remove the barrel band, barrel retainer screw, slightly depress the circular magazine retainer, remove the stock magazine release, insert the new one, release the circular magazine retainer and you're done. No tools required for installation other than what's needed to get the barrel/receiver out.
I did find the edges a little sharp for my liking. A few minutes with some fine sandpaper changed that. I also decided to dremel the portion of the release near the bolt catch lever thingie to give me a little more clearance in that area because I thought it did slightly interfere with that.
I installed it in conjunction with my Tapco Intrafuse stock and works just fine. I also installed a Volquartsen bolt release (a must-have in my mind) and it does not interfere with that in any way.
The release sits about where my first joint of my extended index finger is. It would be better in ergonomics for my size hands if it rested about .5" to .75" forward of where it currently sits. However, it's in a good spot for children and women with smaller hands.
Overall, no major complaints. 5 stars is a near impossible task in my mind and gave it 4 for the reasons listed above. I plan to buy another some time in the future.
Claramente recomendable
A huge improvement over factory 14/08/2011
Makes releasing the magazine easy for right- or left-handed shooters with just the use of the trigger finger. Installation took less than 5 minutes.
Recomendable
Great Addition! 27/06/2011
This was a great addition to my Ruger 10/22 compact! It follows the contours of the trigger guard much better than the Tactical Solutions brand, and doesnt wobble near as much (none really). Mags hold in firmly and release with ease. Only takes a small adjustment with my trigger hand/finger to release/insert a mag. Only four stars because I havent had the chance to use it at the range yet.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
Vistos recientemente
¡Ups! Algo salió mal.
Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.
Mejora tu tiro con la palanca de liberación T3 para el 10/22® de Ruger. 🎯 Diseño ergonómico y fácil de usar. ¡Hazlo tuyo!
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Sistema de colimación autónomo que se ajusta en la cámara del rifle o pistola y proyecta un haz de láser rojo para apuntar sin disparar.
Carcasa de latón mecanizado que parece un cartucho, incluye pilas AG5, funda de nailon y es compatible con varios calibres.
Rango de avistamiento de 15-100 yardas, con un tamaño del punto de 2” a 100 yardas; ideal para ajustes precisos de visores y miras.
Cargadores de polímero autolubricantes con capacidad para 25 rondas de munición .22LR.
Compatible con Ruger® 10/22®, 77/22® y AMT Lightning, con labios de alimentación de Acero Inoxidable para un rendimiento óptimo.
Facilita la unión de dos o tres cargadores rápidamente para recargas rápidas y más tiempo de disparo.
Raíles de aluminio con espaciado de ranuras Picatinny permiten cambios rápidos y flexibilidad en la elección del visor.
Tres opciones de altura para ajustarse a diferentes tamaños de objetivos y mejorar la posición de la mejilla.
Se instalan usando los agujeros pre-taladrados de fábrica, sin necesidad de alteraciones permanentes en el rifle.
Las tapas protectoras son resistentes al clima, polvo y humedad, protegiendo las lentes durante situaciones tácticas y de caza.
La tapa se abre fácilmente con la presión del dedo, levantándose y quedando fuera del camino.
Las tapas del ocular y del objetivo se venden por separado; mide el diámetro para determinar la tapa correcta.
Cargador de polímero moldeado con labios de alimentación reforzados de acero para una entrega fiable de 10 rondas en escopetas Saiga de calibre 12.
Texturización profunda tipo gofre para un agarre seguro durante cambios de cargador a alta velocidad, ideal para tiradores de competición de tres armas.
Compatible únicamente con escopetas Saiga de calibre 12, con capacidad de 10 rondas y acabado en negro.
El liberador rápido facilita la liberación del cargador sin buscar el botón de fábrica, mejorando la velocidad y comodidad.
Instalación sencilla sin necesidad de un armero y sin modificaciones permanentes al rifle 10/22®.
Fabricado en aluminio anodizado duro, negro, con un peso de 14g y dimensiones de aproximadamente 2-7⁄8" de largo y 7⁄8" de ancho máximo.