Designed by champion shooter Chip McCormick with his unique, flat follower to give more capacity. All feature a fixed base that's drilled for easy pad installation. All springs are by Wolff.
Diseñado por el campeón tirador Chip McCormick con su seguidor plano único para ofrecer mayor capacidad. Todos cuentan con una base fija que está perforada para facilitar la instalación de la almohadilla. Todos los resortes son de Wolff.
ESPECIFICACIONES: Acero inoxidable, acabado mate. .45 Gov’t - 12.7 cm de largo, 13.3 cm con almohadilla, 8 rondas.
Más...
Evaluaciones de clientes para CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD
Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 4,3
1911 magazines(23/06/2009)
These work great, no issues. Excellent mags
Range use ONLY!!(02/02/2010)
I own several of these mags. When they are NEW they work fine but after only a few dozen times of loading & unloading, the distance in the feed ramp begins to close and then they start to fail. Mine began to tilt, which caused the weapon to fail. I tried spacing the mags back out but this didn't work for long. Now they are nothing more than range mags used to produce malfunctions to practice clearing procedures. For no reason would I use them for carry purposes, even new.
Not Worth It(09/08/2010)
Hello,
I bought two of these, and have seen several more.
One of the ones I bought had a warped body and would not fall free. The other worked as advertised - for a while.
Feeding and slide lock became issues after a few hundred rounds apiece. I traced this to the followers; replacing them with standard dimpled followers from seven round military magazines made them work, and work well.
Bottom line: The bodies are good about half the time. They will not be so warped as to prevent feeding, though they may not fall free. The followers and springs should be replaced with quality seven round aftermarket parts.
I'm amazed....(03/06/2011)
...that these magazines have ANY poor reviews.
I've used many Shooting Star mags over the years and they are the best value there is out there.
There are more expensive mags. There are fancier mags. I haven't had one not work yet...and without "tuning." If your gun is set up right, these mags run.
Great Mags(19/12/2012)
These mags are terrific! I have used them over about the last 12 years and they are the only mags I use in my Colt and S.A. 1911's. I have had the blued steel and stainless and both types have worked great. They cycle fine,fit great and drop free on their own, even the older ones.
second purchase(25/12/2012)
I bought CMC magazines in the past, and have had no issues. When I needed more magazines for work, I did not hesitate to buy CMC magazines again.
Works perfect with a PM7(03/04/2018)
To be honest this mag looks identical to the standard Dan Wesson mags that comes with my PM7. The end plate is definitely different but the rest of the magazine frame, the follower and the spring are almost identical.
Worked pretty flawlessly with my pm7 too. Iâm happy.
My only complains are the follower is metal and the end plate looks awkward when it was seated in my pistol
N.º de producto: 207145208 CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD Ref Fabricante: M-MG-45FS8705263141100 Diseñado por el campeón tirador Chip McCormick con su seguidor plano único para ofrecer mayor capacidad. Todos cuentan con una base fija que está perforada para facilitar la instalación de la almohadilla. Todos los resortes son de Wolff.
Acabado:
Silver
Capacidad:
8-Round
Cartucho:
45 Auto (ACP)
Hacer:
1911
Material:
Stainless Steel
Modelo:
Commander,Government
Peso de entrega: 0,068kgAltura de envío: 10mmAncho de envío: 58mmLongitud de envío: 112mm
UPC
: 705263141100
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
N.º de producto: 207145218 CHIP MCCORMICK CUSTOM MATCH GRADE, .45 ACP, 8 ROUND, STAINLESS, W/ PAD Ref Fabricante: M-MG-45FS8-P705263141117 Diseñado por el campeón tirador Chip McCormick con su seguidor plano único para ofrecer mayor capacidad. Todos cuentan con una base fija que está perforada para facilitar la instalación de la almohadilla. Todos los resortes son de Wolff.
Designed by champion shooter Chip McCormick with his unique, flat follower to give more capacity. All feature a fixed base that's drilled for easy pad installation. All springs are by Wolff.
Diseñado por el campeón tirador Chip McCormick con su seguidor plano único para ofrecer mayor capacidad. Todos cuentan con una base fija que está perforada para facilitar la instalación de la almohadilla. Todos los resortes son de Wolff.
ESPECIFICACIONES: Acero inoxidable, acabado mate. .45 Gov’t - 12.7 cm de largo, 13.3 cm con almohadilla, 8 rondas.
Más...
Evaluaciones de clientes para CHIP MCCORMICK CUSTOM .45 GOV'T NO PAD
Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 4,3
1911 magazines(23/06/2009)
These work great, no issues. Excellent mags
Range use ONLY!!(02/02/2010)
I own several of these mags. When they are NEW they work fine but after only a few dozen times of loading & unloading, the distance in the feed ramp begins to close and then they start to fail. Mine began to tilt, which caused the weapon to fail. I tried spacing the mags back out but this didn't work for long. Now they are nothing more than range mags used to produce malfunctions to practice clearing procedures. For no reason would I use them for carry purposes, even new.
Not Worth It(09/08/2010)
Hello,
I bought two of these, and have seen several more.
One of the ones I bought had a warped body and would not fall free. The other worked as advertised - for a while.
Feeding and slide lock became issues after a few hundred rounds apiece. I traced this to the followers; replacing them with standard dimpled followers from seven round military magazines made them work, and work well.
Bottom line: The bodies are good about half the time. They will not be so warped as to prevent feeding, though they may not fall free. The followers and springs should be replaced with quality seven round aftermarket parts.
I'm amazed....(03/06/2011)
...that these magazines have ANY poor reviews.
I've used many Shooting Star mags over the years and they are the best value there is out there.
There are more expensive mags. There are fancier mags. I haven't had one not work yet...and without "tuning." If your gun is set up right, these mags run.
Great Mags(19/12/2012)
These mags are terrific! I have used them over about the last 12 years and they are the only mags I use in my Colt and S.A. 1911's. I have had the blued steel and stainless and both types have worked great. They cycle fine,fit great and drop free on their own, even the older ones.
second purchase(25/12/2012)
I bought CMC magazines in the past, and have had no issues. When I needed more magazines for work, I did not hesitate to buy CMC magazines again.
Works perfect with a PM7(03/04/2018)
To be honest this mag looks identical to the standard Dan Wesson mags that comes with my PM7. The end plate is definitely different but the rest of the magazine frame, the follower and the spring are almost identical.
Worked pretty flawlessly with my pm7 too. Iâm happy.
My only complains are the follower is metal and the end plate looks awkward when it was seated in my pistol