Exclusive, wedge-shaped, “Concealed Carry” design puts the sight body and blade close to the slide for a snag-free draw and smooth, comfortable carry. Highly visible rear blade with re- bated notch gives fast, glare-free sight pickup for more accurate instinctive shooting. Available in: plain black; with two, white dots. 1911 Auto fits Colt-style, 1911 auto rear dovetail, uses Series 80 factory front. Includes windage lock screw. May require slight fitting. .125" (3.1mm) wide notch. Rear blade - .630" (16mm) wide, .223" (5.6mm) high.
Más...
Exclusivo diseño en forma de cuña "Concealed Carry" que coloca el cuerpo del alza y la hoja cerca de la corredera para un desenfunde sin enganches y un porte cómodo y suave. Hoja trasera altamente visible con muesca rebajada que proporciona una rápida captación de la mira sin deslumbramientos para un tiro instintivo más preciso. Disponible en: negro liso; con dos puntos blancos. El modelo 1911 Auto se ajusta al estilo Colt, en la cola de milano trasera de un auto 1911, utiliza el frente de fábrica de la Serie 80. Incluye tornillo de bloqueo de deriva. Puede requerir un ligero ajuste. Muesca de .125" (3.1mm) de ancho. Hoja trasera - .630" (16mm) de ancho, .223" (5.6mm) de alto.
Más...
Evaluaciones de clientes para NOVAK 2-DOT 1911 CARRY SIGHT
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,3
Awful fit(31/03/2014)
Bought this sight for my Springfield Armory Mil-Spec on the recommendation of one of Brownells gunsmiths. Told him I wanted something where I could just remove the old sight and slide in the new one with no hassle. Didn't work that way. the sight needed extensive fitting which took over an hour, and once fitted, the sight rides high above the slide and is nothing like a Novak Low Mount. There was enough of a gap (I'm guessing about a 32nd of an inch) between the sight and the slide. Looked awful and shot high. removed it and went back to the factory sight.
Very poorly designed (16/10/2014)
The sight is of sturdy construction. And I can handle the minor fitting required but there is just no way to install this sight without it looking ridiculous. It sits very high above the slide. So high you can see daylight between the sight and slide.
Worked Fine On My Springfield Mil-Spec(16/03/2015)
I installed this sight on my Springfield Armory 1911 A1 Mil-Spec, with no problems. The only difficult part was getting the original GI sight out, but after reading a few posts online, I clamped the slide in my bench vise with a block of wood on either side, and drove it out with a brass punch and hammer. The new Novak sight went in easily in under 10 minutes, the key being that I fitted it by removing stock only from the BOTTOM of the sight's dovetail, not the sides, measuring it as I went with a dial caliper, so that it would sit as low as possible on the slide. If you remove material from the sides of the dovetail, then it will sit higher than the GI sight, and there will be an ugly gap between the sight and the top of the slide.
N.º de producto: 662017005 NOVAK 2-DOT 1911 CARRY SIGHT Ref Fabricante: DCR02 Exclusivo diseño en forma de cuña "Concealed Carry" que coloca el cuerpo del alza y la hoja cerca de la corredera para un desenfunde sin enganches y un porte cómodo y suave. Hoja trasera altamente visible con muesca rebajada que proporciona una rápida captación de la mira sin deslumbramientos para un tiro instintivo más preciso. Disponible en: negro liso; con dos puntos blancos. El modelo 1911 Auto se ajusta al estilo Colt, en la cola de milano trasera de un auto 1911, utiliza el frente de fábrica de la Serie 80. Incluye tornillo de bloqueo de deriva. Puede requerir un ligero ajuste. Muesca de .125" (3.1mm) de ancho. Hoja trasera - .630" (16mm) de ancho, .223" (5.6mm) de alto.
Diseño exclusivo "Concealed Carry" que permite un desenfunde sin enganches y un porte cómodo.
Hoja trasera con muesca rebajada para una rápida captación de la mira y un tiro instintivo más preciso.
Compatible con el modelo 1911 Auto estilo Colt, disponible en negro liso y con dos puntos blancos.
Atributos
Color del punto de mira:
White Dot
Estilo:
2-Dot,Low-Profile
Hacer:
1911
Modelo:
Commander,Government,Officers
Peso de entrega: 0,009kgAncho de envío: 57mmLongitud de envío: 89mm
Detalles del artículo
Hecho en USA
Mejora tu puntería con la alza trasera 1911 CARRY NOVAK 2-DOT. Diseño cómodo y suave para un desenfunde rápido. ✨ ¡Hazte con la tuya!
Exclusive, wedge-shaped, “Concealed Carry” design puts the sight body and blade close to the slide for a snag-free draw and smooth, comfortable carry. Highly visible rear blade with re- bated notch gives fast, glare-free sight pickup for more accurate instinctive shooting. Available in: plain black; with two, white dots. 1911 Auto fits Colt-style, 1911 auto rear dovetail, uses Series 80 factory front. Includes windage lock screw. May require slight fitting. .125" (3.1mm) wide notch. Rear blade - .630" (16mm) wide, .223" (5.6mm) high.
Más...
Exclusivo diseño en forma de cuña "Concealed Carry" que coloca el cuerpo del alza y la hoja cerca de la corredera para un desenfunde sin enganches y un porte cómodo y suave. Hoja trasera altamente visible con muesca rebajada que proporciona una rápida captación de la mira sin deslumbramientos para un tiro instintivo más preciso. Disponible en: negro liso; con dos puntos blancos. El modelo 1911 Auto se ajusta al estilo Colt, en la cola de milano trasera de un auto 1911, utiliza el frente de fábrica de la Serie 80. Incluye tornillo de bloqueo de deriva. Puede requerir un ligero ajuste. Muesca de .125" (3.1mm) de ancho. Hoja trasera - .630" (16mm) de ancho, .223" (5.6mm) de alto.
Más...
Evaluaciones de clientes para NOVAK 2-DOT 1911 CARRY SIGHT
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 2,3
Awful fit(31/03/2014)
Bought this sight for my Springfield Armory Mil-Spec on the recommendation of one of Brownells gunsmiths. Told him I wanted something where I could just remove the old sight and slide in the new one with no hassle. Didn't work that way. the sight needed extensive fitting which took over an hour, and once fitted, the sight rides high above the slide and is nothing like a Novak Low Mount. There was enough of a gap (I'm guessing about a 32nd of an inch) between the sight and the slide. Looked awful and shot high. removed it and went back to the factory sight.
Very poorly designed (16/10/2014)
The sight is of sturdy construction. And I can handle the minor fitting required but there is just no way to install this sight without it looking ridiculous. It sits very high above the slide. So high you can see daylight between the sight and slide.
Worked Fine On My Springfield Mil-Spec(16/03/2015)
I installed this sight on my Springfield Armory 1911 A1 Mil-Spec, with no problems. The only difficult part was getting the original GI sight out, but after reading a few posts online, I clamped the slide in my bench vise with a block of wood on either side, and drove it out with a brass punch and hammer. The new Novak sight went in easily in under 10 minutes, the key being that I fitted it by removing stock only from the BOTTOM of the sight's dovetail, not the sides, measuring it as I went with a dial caliper, so that it would sit as low as possible on the slide. If you remove material from the sides of the dovetail, then it will sit higher than the GI sight, and there will be an ugly gap between the sight and the top of the slide.