Más de 300,000 clientes - ¡les damos las gracias!

40,000+ productos para caza y deportes de tiro

Mejora tu escopeta con la 3-RAIL PICATINNY SHOTGUN MOUNT de LITE MOUNT TECHNOLOGIES. 💡 Instala luces y láseres sin modificar tu arma.

LITE MOUNT TECHNOLOGIES 3-RAIL PICATINNY SHOTGUN MOUNT - LITE MOUNT TECHNOLOGIES 1" 3-RAIL SHOTGUN MOUNT

100002041

Top takeaways

  1. Montura de aluminio con tres raíles para acoplar accesorios Picatinny como luces y láseres.
  2. Se instala sin modificaciones en el tubo del cargador de escopetas Winchester, Remington y FN.
  3. Acabado mate negro, asegura alineación correcta con el patrón de disparo y evita interferencias con las miras de hierro.

Atributos

  • Acabado: Matte Black
  • Estilo: Rail Mount
  • Peso de entrega: 0,091kg

Detalles del artículo

Hecho en USA
  • Especificaciones:
  • Acabado: Matte Black
  • Estilo: Rail Mount
84.9 84.9 1 EUR
84.9 EUR 84,90 €

Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.

N.º de producto: 100002041

N.º fabr.: NONE

El soporte rígido de aluminio con tri-raíl te permite acoplar accesorios picatinny como luces, láseres y otro equipo táctico a tu escopeta. Se instala en el tubo del cargador sin modificaciones en la arma, y puede sostener hasta tres accesorios. El punto de montaje bajo mantiene las luces y láseres en la alineación adecuada con el patrón de disparo y evita interferencias con las miras de hierro. Se asegura con dos tornillos de sujeción 8⁄32".
No disponible
Notificar sobre disponibilidad
  • Especificaciones:
  • Acabado: Matte Black
  • Estilo: Rail Mount

Descripción:

Mostrar original (inglés)
Se monta fácilmente debajo del cañón; Acepta accesorios Picatinny
El soporte rígido de aluminio con tri-raíl te permite acoplar accesorios picatinny como luces, láseres y otro equipo táctico a tu escopeta. Se instala en el tubo del cargador sin modificaciones en la arma, y puede sostener hasta tres accesorios. El punto de montaje bajo mantiene las luces y láseres en la alineación adecuada con el patrón de disparo y evita interferencias con las miras de hierro. Se asegura con dos tornillos de sujeción 8⁄32".

ESPECIFICACIONES: aluminio 6061-T6, negro mate. 1-5⁄8" (4.2cm) de largo. 1" - Compatible con tubos de cargador de escopetas Winchester, Remington y FN.

Top takeaways

  1. Montura de aluminio con tres raíles para acoplar accesorios Picatinny como luces y láseres.
  2. Se instala sin modificaciones en el tubo del cargador de escopetas Winchester, Remington y FN.
  3. Acabado mate negro, asegura alineación correcta con el patrón de disparo y evita interferencias con las miras de hierro.

Atributos

  • Acabado: Matte Black
  • Estilo: Rail Mount
  • Peso de entrega: 0,091kg

Detalles del artículo

Hecho en USA

Opiniones de clientes

Calificaciones de clientes (8)

4 / 5
Claramente recomendable

Brownells USA Exactly what I was looking for! 31/07/2018

Exactly what I wanted in order to mount a flashlight and sling mount on my Moss 590 shotgun. I used a 1" scope ring to mount the flashlight to the side rail. No issues putting the mount onto the shotgun. Just unscrewed the cap, pulled the barrel up and slide the mount onto the magazine tube. Once I had it where I wanted, I tightened the two screw and I'm all set. I will add a bit of thread locker to the screw just to be on the safe side.

Recomendable con reservas

Brownells USA Doesn't fit Remington Model 887 08/11/2012

I purchased the LITE MOUNT TECHNOLOGIES 26MM 3-RAIL SHOTGUN MOUNT for my new Remington 887 tactical shotgun even though the magazine tube measures 27.5MM in diameter. When I recieved it, it would not fit on the magazine tube since the split where the clamping screws are located are un-even meaning the that the inside diameter (I.D.) is not round. So I tighten the clamping screws so the ID would be as round as possible. Next I had to machine the I.D. to a larger size (27MM). The fit test show that I had to use the I.D. expander to fit it on the magazine tube and it finally did fit. The next problem was installing the barrel. The semi-circle barrel/magazine tube gap filler would not let the barrel mount, it was too thick for the gap between the barrel/magazine tube on the 887. I had to totally remove it. Finally the rail mount fit and was useable on the gun. I rated this product a 3 since it is well manufactured and would most likely fit and on a standard 870 which has smaller diameter magazine tubes and larger gaps between the barrel and magazine.

Los clientes compraron

¿Sabías que?

Información del fabricante

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

¡Ups! Algo salió mal.

Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.

Volver arriba