Holds two VFG felt pellets, one on threads and one slip-fit. Threads to the male end of .22 and .30 caliber Dewey rods. .22 cal has 8-32 thread and .30 cal has 12-28 thread.
SPECS: Brass. 1½" (3.8cm) long.
Más...
Sostiene dos pellets de fieltro VFG, uno roscado y otro de ajuste deslizante. Se enrosca en el extremo macho de las varillas Dewey de calibre .22 y .30. El calibre .22 tiene una rosca de 8-32 y el calibre .30 tiene una rosca de 12-28.
ESPECIFICACIONES: Latón. 1½" (3.8cm) de longitud.
Más...
Evaluaciones de clientes para BROWNELLS 30 CALIBER VFG 2-PELLET ADAPTER 12-28F
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 3,1
Thread Size?????(13/08/2010)
Great product to use with the mated felt pads But which rods do they fit????? Requires a male end or adapter size ????????????????????????????????????????
Needs an adapter!(24/01/2012)
Ordered this part but can't use it because it doesn't fit onto the cleaning rod. Both the cleaning rod and this jag have female threads! After talking with the gun tech @ Brownells, I was told to order part number 929-110-607, which is the male to male adapter needed to use with the cleaning rod.
Wrong thread for most cleaning rods!(27/01/2012)
Don't order this jag if our cleaning rod has the typical female end threads, because there is not way to attach it. Instead order the jag: 929-100-607. This jag has the correct male thread end to connect with most cleaning rods.
Adapter?(06/02/2012)
As near as I can tell, the thread pattern is 5.5 mmX28TPI. You need an adapter for the adapter that must come from Mars.
As advertised(24/08/2014)
As stated in the description, this adapter fits the 12-28 male threads on the Dewey cleaning rods. I just started using these on a 30BR barrel and really like it. If you put two pellets on the tip, they expand enough to give good contact to the bottom of the barrel grooves. Pellets used this way come out of the muzzle striped from cleaning to the bottom of the grooves. I'm going to use the 6mm version on my 6PPC as well.
.30 Cal VFG Adapter, CAUTION(30/09/2016)
Be careful, this has a #12 thread. 99.9% of all cleaning rods have an 8-32 thread
Works fine(18/11/2009)
Make sure you get the adapter for your cleaning rod. TIP:Get a 1 inch 8/32 screw and cut off the head and use a 5mm by .07 die and rethread one end to fit the VFG adapter. Cost me only [$].
N.º de producto: 084000003 BROWNELLS 30 CALIBER VFG 2-PELLET ADAPTER 12-28F Ref Fabricante: BR:30FELT608060200639 Sostiene dos pellets de fieltro VFG, uno roscado y otro de ajuste deslizante. Se enrosca en el extremo macho de las varillas Dewey de calibre .22 y .30. El calibre .22 tiene una rosca de 8-32 y el calibre .30 tiene una rosca de 12-28.
21.9EUR021,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Calibre:
30 Caliber (.308)
Peso de entrega: 0,005kgAncho de envío: 83mmLongitud de envío: 146mm
UPC
: 608060200639
Detalles del artículo
Hecho en USA
N.º de producto: 084000002 BROWNELLS 22 CALIBER VFG 2-PELLET ADAPTER 8-32F608060000581 Sostiene dos pellets de fieltro VFG, uno roscado y otro de ajuste deslizante. Se enrosca en el extremo macho de las varillas Dewey de calibre .22 y .30. El calibre .22 tiene una rosca de 8-32 y el calibre .30 tiene una rosca de 12-28.
Holds two VFG felt pellets, one on threads and one slip-fit. Threads to the male end of .22 and .30 caliber Dewey rods. .22 cal has 8-32 thread and .30 cal has 12-28 thread.
SPECS: Brass. 1½" (3.8cm) long.
Más...
Sostiene dos pellets de fieltro VFG, uno roscado y otro de ajuste deslizante. Se enrosca en el extremo macho de las varillas Dewey de calibre .22 y .30. El calibre .22 tiene una rosca de 8-32 y el calibre .30 tiene una rosca de 12-28.
ESPECIFICACIONES: Latón. 1½" (3.8cm) de longitud.
Más...
Evaluaciones de clientes para BROWNELLS 30 CALIBER VFG 2-PELLET ADAPTER 12-28F
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 3,1
Thread Size?????(13/08/2010)
Great product to use with the mated felt pads But which rods do they fit????? Requires a male end or adapter size ????????????????????????????????????????
Needs an adapter!(24/01/2012)
Ordered this part but can't use it because it doesn't fit onto the cleaning rod. Both the cleaning rod and this jag have female threads! After talking with the gun tech @ Brownells, I was told to order part number 929-110-607, which is the male to male adapter needed to use with the cleaning rod.
Wrong thread for most cleaning rods!(27/01/2012)
Don't order this jag if our cleaning rod has the typical female end threads, because there is not way to attach it. Instead order the jag: 929-100-607. This jag has the correct male thread end to connect with most cleaning rods.
Adapter?(06/02/2012)
As near as I can tell, the thread pattern is 5.5 mmX28TPI. You need an adapter for the adapter that must come from Mars.
As advertised(24/08/2014)
As stated in the description, this adapter fits the 12-28 male threads on the Dewey cleaning rods. I just started using these on a 30BR barrel and really like it. If you put two pellets on the tip, they expand enough to give good contact to the bottom of the barrel grooves. Pellets used this way come out of the muzzle striped from cleaning to the bottom of the grooves. I'm going to use the 6mm version on my 6PPC as well.
.30 Cal VFG Adapter, CAUTION(30/09/2016)
Be careful, this has a #12 thread. 99.9% of all cleaning rods have an 8-32 thread
Works fine(18/11/2009)
Make sure you get the adapter for your cleaning rod. TIP:Get a 1 inch 8/32 screw and cut off the head and use a 5mm by .07 die and rethread one end to fit the VFG adapter. Cost me only [$].