AK47 MFER (Magazine Funnel Enhanced Reload) Allows the user to reload an AK47 faster than ever Large funnel opening guides magazine into position Drop-in part, no modification to the host weapon Fits all AKM pattern AK47 style rifles along with 7.62 Saigas Will not fit standard Yugo pattern AKs Polymer construction with stainless steel hardware Includes mounting hardware
El AK47 MFER (Magazine Funnel Enhanced Reload) permite al usuario recargar un AK47 más rápido que nunca. La gran apertura del embudo guía el cargador hacia su posición. Pieza de inserción directa, no requiere modificaciones en el arma anfitriona. Compatible con todos los rifles estilo AK47 con patrón AKM, así como con los Saigas 7.62. No es compatible con los AKs de patrón Yugo estándar. Construcción de polímero con herrajes de acero inoxidable. Incluye herrajes de montaje
ESPECIFICACIONES: Compatible con rifles AKM/AK47. Construcción de polímero, herrajes de acero inoxidable.
Más...
Evaluaciones de clientes para SOLAR TACTICAL AK47 MAG WELL
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 1,9
Does not fit WASR-10(16/01/2013)
Does not fit WASR-10, waste of money.
Doesn't work(17/04/2013)
I bought one from the guy at a gun show and it didn't work on my Arsenal/Saiga AK-47. I ended up mailing it back to the owner in Hayward Ca. for a refund. I wish it would've worked but it is flawed.
Bad Fit(29/04/2013)
This would not install on my Romanian
AK-47 MFER Mag Well works(04/11/2013)
Due to the wide variety of AK variants out there the MFER mag well must be fitted to each individual rifle. The receivers of different manufacturers differ in thickness so you will need to make adjustments accordingly. The different thickness in the sheet metal receivers may require you to remove the little metal piece on the MFER that clips over the front of the mag well and open it up to fit the thicker receivers. Just make sure you remove the metal piece from the MFER before making the adjustment. Also you may need to use a dremel tool or file to trim the rear of the MFER around the area of the mag release to fit properly. The above adjustments are not difficult to do. Once properly fitted the MFER works great. Makes your AK mag changes smoother, easier, and much faster.
Cheaply made(12/01/2014)
Fit on my Arsenal AK fine. Or so I thought. Small screw attaching metal lip to the receiver stripped out. Figured no problem, as I have some more loctite and I'll try that. Installed it again, began to screw in the sides when the cheap 'polymer' cracked and almost split in two. Tried some JB Weld and and figured I could just sand it down later. Tried fitting a metal Bulgarian factory mag and a Tapco mag in, and neither would fit due to the mag funnel. Removed and trashed.
I'd suggest training with mag reloads and get used to how it works.
I would not recommend putting this on any rifle you plan to use to defend your life. If you can get it to work for a range weapon or competitions, best of luck.
It works as adertised(20/07/2014)
I bought one to give it try on my 74, was very pleased. I've used this adapter in training classes, The large funnel opening guides magazine into position, facilitates in a faster reload. Drop-in part, no modification to the weapon.
Fits WASR 10 after fitting.(15/08/2014)
I used this to complete a double stack mod on my economy WASR 10. I used the unit as a pattern to open up my receiver. Fitting of the small metal tang was the only issue. Minor grinding and opening the spring opening was all that was required. This is not a bolt on but with minor fitting it works well. I am using tapco 20rds with a nice snug fit.
Don't buy (13/04/2015)
The mag well had to be worked on several times to get proper fit. I had to Dremel it a lot. One of the screw holes was off center which made if very difficult screw together. The screws are weak and way to small. After it was installed it didn't seem to do much to assist the the magazine feed. I removed it and scrapped it. This thing cost way to much, and it is just junk. Save your money. I read the reviews and still bought it. Bad idea.
Save your money(09/03/2017)
This is a cheap, flimsy, useless piece of plastic that doesn't fit (at all) and is held together with hardware so small that I thought they accidentally shipped parts to the world's smallest model airplane or displays from a class on how to keep choking hazards away from toddlers. Awful design for a rifle that has a rep as one of the most tough and durable firearms in history. Save your money and load your AK like Mikhail intended.
N.º de producto: 100010894 SOLAR TACTICAL AK47 MAG WELL Ref Fabricante: AK47-MFER El AK47 MFER (Magazine Funnel Enhanced Reload) permite al usuario recargar un AK47 más rápido que nunca. La gran apertura del embudo guía el cargador hacia su posición. Pieza de inserción directa, no requiere modificaciones en el arma anfitriona. Compatible con todos los rifles estilo AK47 con patrón AKM, así como con los Saigas 7.62. No es compatible con los AKs de patrón Yugo estándar. Construcción de polímero con herrajes de acero inoxidable. Incluye herrajes de montaje
El AK47 MFER permite recargas más rápidas gracias a su gran apertura de embudo.
Compatible con rifles estilo AK47 con patrón AKM y Saigas 7.62, pero no con AKs de patrón Yugo estándar.
Construcción de polímero con herrajes de acero inoxidable; no requiere modificaciones en el arma.
Atributos
Color:
Black
Hacer:
AK-47
Peso de entrega: 0,023kgAltura de envío: 8mmAncho de envío: 52mmLongitud de envío: 108mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Mejora tu recarga con el AK-47 MAGAZINE WELL de SOLAR TACTICAL. 🚀 Compatible con AKM y Saigas. ¡Hazlo más fácil y rápido!
AK47 MFER (Magazine Funnel Enhanced Reload) Allows the user to reload an AK47 faster than ever Large funnel opening guides magazine into position Drop-in part, no modification to the host weapon Fits all AKM pattern AK47 style rifles along with 7.62 Saigas Will not fit standard Yugo pattern AKs Polymer construction with stainless steel hardware Includes mounting hardware
El AK47 MFER (Magazine Funnel Enhanced Reload) permite al usuario recargar un AK47 más rápido que nunca. La gran apertura del embudo guía el cargador hacia su posición. Pieza de inserción directa, no requiere modificaciones en el arma anfitriona. Compatible con todos los rifles estilo AK47 con patrón AKM, así como con los Saigas 7.62. No es compatible con los AKs de patrón Yugo estándar. Construcción de polímero con herrajes de acero inoxidable. Incluye herrajes de montaje
ESPECIFICACIONES: Compatible con rifles AKM/AK47. Construcción de polímero, herrajes de acero inoxidable.
Más...
Evaluaciones de clientes para SOLAR TACTICAL AK47 MAG WELL
Número de evaluaciones: 9
De brownells.com: 9
Evaluación media: 1,9
Does not fit WASR-10(16/01/2013)
Does not fit WASR-10, waste of money.
Doesn't work(17/04/2013)
I bought one from the guy at a gun show and it didn't work on my Arsenal/Saiga AK-47. I ended up mailing it back to the owner in Hayward Ca. for a refund. I wish it would've worked but it is flawed.
Bad Fit(29/04/2013)
This would not install on my Romanian
AK-47 MFER Mag Well works(04/11/2013)
Due to the wide variety of AK variants out there the MFER mag well must be fitted to each individual rifle. The receivers of different manufacturers differ in thickness so you will need to make adjustments accordingly. The different thickness in the sheet metal receivers may require you to remove the little metal piece on the MFER that clips over the front of the mag well and open it up to fit the thicker receivers. Just make sure you remove the metal piece from the MFER before making the adjustment. Also you may need to use a dremel tool or file to trim the rear of the MFER around the area of the mag release to fit properly. The above adjustments are not difficult to do. Once properly fitted the MFER works great. Makes your AK mag changes smoother, easier, and much faster.
Cheaply made(12/01/2014)
Fit on my Arsenal AK fine. Or so I thought. Small screw attaching metal lip to the receiver stripped out. Figured no problem, as I have some more loctite and I'll try that. Installed it again, began to screw in the sides when the cheap 'polymer' cracked and almost split in two. Tried some JB Weld and and figured I could just sand it down later. Tried fitting a metal Bulgarian factory mag and a Tapco mag in, and neither would fit due to the mag funnel. Removed and trashed.
I'd suggest training with mag reloads and get used to how it works.
I would not recommend putting this on any rifle you plan to use to defend your life. If you can get it to work for a range weapon or competitions, best of luck.
It works as adertised(20/07/2014)
I bought one to give it try on my 74, was very pleased. I've used this adapter in training classes, The large funnel opening guides magazine into position, facilitates in a faster reload. Drop-in part, no modification to the weapon.
Fits WASR 10 after fitting.(15/08/2014)
I used this to complete a double stack mod on my economy WASR 10. I used the unit as a pattern to open up my receiver. Fitting of the small metal tang was the only issue. Minor grinding and opening the spring opening was all that was required. This is not a bolt on but with minor fitting it works well. I am using tapco 20rds with a nice snug fit.
Don't buy (13/04/2015)
The mag well had to be worked on several times to get proper fit. I had to Dremel it a lot. One of the screw holes was off center which made if very difficult screw together. The screws are weak and way to small. After it was installed it didn't seem to do much to assist the the magazine feed. I removed it and scrapped it. This thing cost way to much, and it is just junk. Save your money. I read the reviews and still bought it. Bad idea.
Save your money(09/03/2017)
This is a cheap, flimsy, useless piece of plastic that doesn't fit (at all) and is held together with hardware so small that I thought they accidentally shipped parts to the world's smallest model airplane or displays from a class on how to keep choking hazards away from toddlers. Awful design for a rifle that has a rep as one of the most tough and durable firearms in history. Save your money and load your AK like Mikhail intended.
Ayuda y contacto
(0) 
Newsletters
Vista clásica
Vista móvil