This set of three tough polypropylene trays stack inside the MTM .50 caliber ammo cans, turning it into an organized tool box with 22 compartments of various sizes. Finger tabs help you remove and replace the trays, and fold neatly when the trays are stacked. Trays will also fit other .50 caliber ammo can, even military-style metal cans, with interior dimensions of 11" x 5.5".
SPECS: Weight: 1.76 Pounds; Inside Dim: 5.8”(L) x 11.0”(W) x 7.2”(H); Outside Dim: 7.4”(L) x 13.5”(W) x 8.5”(H). Ammo Can Organizer - 11"x5.5"
Más...
Este conjunto de tres bandejas de polipropileno resistente se apilan dentro de las cajas de munición de calibre .50 de MTM, convirtiéndola en una caja de herramientas organizada con 22 compartimentos de varios tamaños. Las pestañas de los dedos te ayudan a quitar y reemplazar las bandejas, y se pliegan ordenadamente cuando las bandejas están apiladas. Las bandejas también son compatibles con otras cajas de munición de calibre .50, incluso las cajas metálicas de estilo militar, con dimensiones interiores de 11" x 5.5".
ESPECIFICACIONES: Peso: 1.76 libras; Dim internas: 5.8”(L) x 11.0”(W) x 7.2”(H); Dim externas: 7.4”(L) x 13.5”(W) x 8.5”(H). Organizador para Caja de Munición - 11"x5.5"
Más...
Evaluaciones de clientes para MTM CASE-GARD AMMO CAN ORGANIZER POLYMER BLACK
Número de evaluaciones: 1
De brownells.com: 1
Evaluación media: 4
Good idea, poor execution(30/03/2015)
This is a useful accessory for storing multiple small items and carrying them to the range. The problem is that most of the tray compartments are too small for the sorts of things that would be commonly stored and carried around in an ammo box. The worst tray is the one with 12 compartments. They are so small that only items like screwdriver bits or dummy cartridges will fit, and I donât need that many compartments for that sort of thing in a range box. And whatâs worse, the compartments are so small and deep that itâs difficult to reach in and remove the contents, especially if the compartment contains multiple items.
It would be much more useful if most of the compartments were large enough for things like screwdriver handles, small hammers, and other items that are likely to be used at the range or other âfieldâ locations. Another thing that manufacturers of storage products like this should do is make them a light color so that small items are easier to see, especially in poor light.
The pros are that the trays fit well but without being difficult to insert and remove. Thereâs a little extra room to close the can lid as well for items that stick up just a bit.
N.º de producto: 100009811 MTM CASE-GARD AMMO CAN ORGANIZER POLYMER BLACK Ref Fabricante: ACO026057362380 Este conjunto de tres bandejas de polipropileno resistente se apilan dentro de las cajas de munición de calibre .50 de MTM, convirtiéndola en una caja de herramientas organizada con 22 compartimentos de varios tamaños. Las pestañas de los dedos te ayudan a quitar y reemplazar las bandejas, y se pliegan ordenadamente cuando las bandejas están apiladas. Las bandejas también son compatibles con otras cajas de munición de calibre .50, incluso las cajas metálicas de estilo militar, con dimensiones interiores de 11" x 5.5".
45.9EUR445,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Altura: 8.5Ancho: 7.4Color: BlackEstilo: Ammo CarrierLongitud: 13.5Material: Polymer
Conjunto de tres bandejas de polipropileno resistente que se apilan dentro de las cajas de munición de calibre .50 de MTM, convirtiéndola en una caja de herramientas organizada con 22 compartimentos.
Las bandejas son compatibles con otras cajas de munición de calibre .50, incluso las cajas metálicas de estilo militar, con dimensiones interiores de 11" x 5.5".
Peso: 1.76 libras; Dimensiones externas: 7.4”(L) x 13.5”(W) x 8.5”(H).
Atributos
Altura:
8.5
Ancho:
7.4
Color:
Black
Estilo:
Ammo Carrier
Longitud:
13.5
Material:
Polymer
Peso de entrega: 0,68kgAltura de envío: 168mmAncho de envío: 150mmLongitud de envío: 279mm
UPC
: 026057362380
Detalles del artículo
Hecho en USA
Organiza tu caja de munición con el AMMO CAN ORGANIZER POLYMER BLACK de MTM. 🛠️ Tres bandejas apilables y 22 compartimentos para mayor eficiencia.
This set of three tough polypropylene trays stack inside the MTM .50 caliber ammo cans, turning it into an organized tool box with 22 compartments of various sizes. Finger tabs help you remove and replace the trays, and fold neatly when the trays are stacked. Trays will also fit other .50 caliber ammo can, even military-style metal cans, with interior dimensions of 11" x 5.5".
SPECS: Weight: 1.76 Pounds; Inside Dim: 5.8”(L) x 11.0”(W) x 7.2”(H); Outside Dim: 7.4”(L) x 13.5”(W) x 8.5”(H). Ammo Can Organizer - 11"x5.5"
Más...
Este conjunto de tres bandejas de polipropileno resistente se apilan dentro de las cajas de munición de calibre .50 de MTM, convirtiéndola en una caja de herramientas organizada con 22 compartimentos de varios tamaños. Las pestañas de los dedos te ayudan a quitar y reemplazar las bandejas, y se pliegan ordenadamente cuando las bandejas están apiladas. Las bandejas también son compatibles con otras cajas de munición de calibre .50, incluso las cajas metálicas de estilo militar, con dimensiones interiores de 11" x 5.5".
ESPECIFICACIONES: Peso: 1.76 libras; Dim internas: 5.8”(L) x 11.0”(W) x 7.2”(H); Dim externas: 7.4”(L) x 13.5”(W) x 8.5”(H). Organizador para Caja de Munición - 11"x5.5"
Más...
Evaluaciones de clientes para MTM CASE-GARD AMMO CAN ORGANIZER POLYMER BLACK
Número de evaluaciones: 1
De brownells.com: 1
Evaluación media: 4
Good idea, poor execution(30/03/2015)
This is a useful accessory for storing multiple small items and carrying them to the range. The problem is that most of the tray compartments are too small for the sorts of things that would be commonly stored and carried around in an ammo box. The worst tray is the one with 12 compartments. They are so small that only items like screwdriver bits or dummy cartridges will fit, and I donât need that many compartments for that sort of thing in a range box. And whatâs worse, the compartments are so small and deep that itâs difficult to reach in and remove the contents, especially if the compartment contains multiple items.
It would be much more useful if most of the compartments were large enough for things like screwdriver handles, small hammers, and other items that are likely to be used at the range or other âfieldâ locations. Another thing that manufacturers of storage products like this should do is make them a light color so that small items are easier to see, especially in poor light.
The pros are that the trays fit well but without being difficult to insert and remove. Thereâs a little extra room to close the can lid as well for items that stick up just a bit.