Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

EGW
ANGLED BORED BUSHING WITH CARRY BEVEL

841370103386 296000067

Pre-Machined With The Proper Lockup Angle

Beveled flange looks right on melted guns. Bored at an angle to prevent barrel bind for smooth cycling. Provides a snug drop-in between barrel and bushing.

SPECS: Stainless steel. .580" (14.7mm) I.D., .70" (17.8mm) O.D.

Más...

Pre-mecanizado con el ángulo correcto de bloqueo

La brida biselada luce perfecta en armas fundidas. Taladrado en ángulo para evitar el bloqueo del cañón y asegurar un ciclo suave. Proporciona un ajuste perfecto y fácil entre el cañón y la pieza.

ESPECIFICACIONES: Acero inoxidable. Diámetro interno de .580" (14.7mm), diámetro externo de .70" (17.8mm).

Más...

Evaluaciones de clientes para EGW CARRY BEVEL BUSHING, COMMANDER

Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 5

With Some Help From .... (13/12/2011)

a bushing wrench, the EGW bushing replaced the stock bushing without any fitting. Did touch up the edges, as they were rather sharp. The barrel fit was to say the least, spot on. Flange on front of bushing is much thicker to extend to the crown of the barrel. Nice beveled edge on flange.

Great Fit! (20/12/2012)

The bushing was for a Colt Combat Commander. It was a tight fit, but it did not require tuning. However, a bushing wrench is necessary due to the tight fit.

fit like a glove (22/02/2010)

Specs are perfect, I.D and O.D. Looks great and fits even better. Couldn't be happier Installed on a Kimber classic custom target with a better fit than the original bushing. A++++

great product (12/12/2011)

i use this bushing with great results in my shop. i use this part # a lot

Excellent (04/05/2012)

About 20 min of fitting on my Colt Govt. model tight fit. Extra thickness has made the barrel flush, Functions great, looks even better. Highly recommended.

Works as good as it looks. (15/08/2012)

This is a nice bushing. Snug fit to the slide and minimal fitting to the barrel.

Fit my RIA 1911 A1 FS perfectly (26/09/2012)

This EGW SS bushing fit my newer RIA 1911-A1 FS perfectly; tighter fit than the original RIA bushing, needed a bushing tool to help seat it, but was not too tight. Fits perfectly with the EGW long nose solid spring plug.

Quality bushing (17/07/2013)

I put this bushing on my Magnum Research 1911. It fit the slide perfectly but required minor fitting for the barrel. It's much tighter than the factory bushing and it looks great on a black gun! I highly recommend this product.

Top of the line product (18/07/2013)

I ordered this bushing and the long nose plug also for my Citadel 1911 A1. With the factory bushing the pistol would print a 3.85 inch group at 25 yards from a bench rest sand bag. I received the EGW bushing and plug yesterday, installed it and went directly to the range. The pistol now prints a 2.65 inch group at 25 yards from the bench rest.

No problems what so ever installing and perfect functioning with no fails to feed or extract.

Best bang for the buck for an accuracy upgrade.

Closer to match fit for Kimber 1911s (20/12/2014)

This is a great upgrade for slightly tighter barrel fitting on a Kimber 1911, but you may need to fit the OD to allow it to go into slide. I was able to drop it into 1 of 3 Kimbers slides that I tried. It is very tight on the one that it does go into.

Another thing I like is the fact there is no writing stamped into exterior. It is nice and clean. Ed Brown and Wilson both stamp their names on exterior of bushing.

Best 1911 bushing on this planet. (13/03/2016)

Order it now.

Smile forever.

Enough said.

Leer 11 mas calificaciones en brownells.com

39.9 41.9 2 EUR

N.º de producto: 296000067
EGW CARRY BEVEL BUSHING, COMMANDER
Ref Fabricante: 14212C 841370103386 La brida biselada luce perfecta en armas fundidas. Taladrado en ángulo para evitar el bloqueo del cañón y asegurar un ciclo suave. Proporciona un ajuste perfecto y fácil entre el cañón y la pieza.

41.9 EUR 4 41,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Stainless Steel Estilo: Angled Hacer: 1911 Modelo: Commander

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Acabado: Stainless Steel Estilo: Angled Hacer: 1911 Modelo: Commander Peso de entrega: 0,014kg Ancho de envío: 83mm Longitud de envío: 146mm UPC : 841370103386

Detalles del artículo

Hecho en USA

N.º de producto: 296000066
EGW CARRY BEVEL BUSHING, GOVT
Ref Fabricante: 14212A 841370103379 La brida biselada luce perfecta en armas fundidas. Taladrado en ángulo para evitar el bloqueo del cañón y asegurar un ciclo suave. Proporciona un ajuste perfecto y fácil entre el cañón y la pieza.

39.9 EUR 6 39,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Acabado: Stainless Steel Estilo: Angled Hacer: 1911 Modelo: Government

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Acabado: Stainless Steel Estilo: Angled Hacer: 1911 Modelo: Government Peso de entrega: 0,005kg Altura de envío: 20mm Ancho de envío: 76mm Longitud de envío: 122mm UPC : 841370103379

Detalles del artículo

Hecho en USA

Mejora tu 1911 Commander con el bushing biselado de acero inoxidable EGW. 🔧 Asegura un ciclo suave y un ajuste perfecto.

Pre-Machined With The Proper Lockup Angle

Beveled flange looks right on melted guns. Bored at an angle to prevent barrel bind for smooth cycling. Provides a snug drop-in between barrel and bushing.

SPECS: Stainless steel. .580" (14.7mm) I.D., .70" (17.8mm) O.D.

Más...

Pre-mecanizado con el ángulo correcto de bloqueo

ESPECIFICACIONES: Acero inoxidable. Diámetro interno de .580" (14.7mm), diámetro externo de .70" (17.8mm).

Más...

Evaluaciones de clientes para EGW CARRY BEVEL BUSHING, COMMANDER

Número de evaluaciones: 11
De brownells.com: 11
Evaluación media: 5

With Some Help From .... (13/12/2011)

Great Fit! (20/12/2012)

The bushing was for a Colt Combat Commander. It was a tight fit, but it did not require tuning. However, a bushing wrench is necessary due to the tight fit.

fit like a glove (22/02/2010)

Specs are perfect, I.D and O.D. Looks great and fits even better. Couldn't be happier Installed on a Kimber classic custom target with a better fit than the original bushing. A++++

great product (12/12/2011)

i use this bushing with great results in my shop. i use this part # a lot

Excellent (04/05/2012)

About 20 min of fitting on my Colt Govt. model tight fit. Extra thickness has made the barrel flush, Functions great, looks even better. Highly recommended.

Works as good as it looks. (15/08/2012)

This is a nice bushing. Snug fit to the slide and minimal fitting to the barrel.

Fit my RIA 1911 A1 FS perfectly (26/09/2012)