Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

TROY INDUSTRIES
AR-15 FIXED FRONT BATTLE SIGHT

812699011164 100005211

Rugged, Reliable, Always Deployed; Globe-Shaped Ears Focus Sight Picture

Rail-mounted, fixed, same-plane front sight works with any AR-style flip-up rear sight as a back-up for a scope or red dot. Distinctive HK-style “globe”-shaped ears aid in fast target acquisition, while the serrated, angled ramp eliminates glare. Elevation adjustable in ½ MOA increments; positive-locking detent ensures settings change only when you want them to. Base with sturdy side clamp and steel crossbolt attaches to any Picatinny railed forend or gas block that is the same height as the receiver rail. Installs with a standard flathead screwdriver—no protruding knobs or levers to catch on brush, clothing, or other equipment.

SPECS: 6061 T6 aluminum, hardcoat anodized, with stainless steel crossbolt, matte black finish. 1¼" (3.18cm) long, 1¼" (3.18cm) wide, 2" (5.08cm) high. 1.5 oz (45g) wt.

Más...

Robusta, Fiable, Siempre Desplegada; Orejas en Forma de Globo para Enfocar la Imagen de la Mira

Mira frontal fija montada en riel, en el mismo plano, funciona con cualquier mira trasera plegable estilo AR como respaldo para un visor o punto rojo. Las distintivas orejas en forma de “globo” al estilo HK facilitan la adquisición rápida del objetivo, mientras que la rampa serrada y angulada elimina el deslumbramiento. Ajustable en elevación en incrementos de ½ MOA; el detente de bloqueo positivo asegura que los ajustes solo cambien cuando tú lo desees. La base con abrazadera lateral robusta y perno transversal de acero se acopla a cualquier guardamanos con rieles Picatinny o bloque de gas que esté a la misma altura que el riel del receptor. Se instala con un destornillador plano estándar, sin perillas ni palancas salientes que puedan engancharse con la vegetación, ropa u otro equipo.

ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, con perno transversal de acero inoxidable, acabado mate negro. 1¼" (3.18cm) de largo, 1¼" (3.18cm) de ancho, 2" (5.08cm) de alto. Peso de 1.5 oz (45g).

Más...

Evaluaciones de clientes para TROY INDUSTRIES 2" FIXED FRONT BATTLE SIGHT ALUMINUM BLACK

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 5

NICE!!!! (09/05/2010)

Absolutely great! I have this mounted on my Daniel Defense Lite railed 9mm AR, works great and very sturdy and great target acquisition. The HK style adds some class as well. Highly recommend it.

Solid, no large side screws (28/11/2013)

I am very pleased with the product. Of all fixed front sights that go on rail that I searched for, this was the only one I found with low profile screws on the sides (in fact, it's not just low profile, in this case it's recessed). There are other fixed front sights out there to attach on rail, most cheaper than this one, but in general those have a large screw on the side. I definitely did not want that.
I just wanted to point out a couple of things to buyers:
1. Even before you tighten the screw, the sight goes in tight on the picatinny rail. I applied some oil on the rail, on both sides, to keep the sight from scratching it on the way to its resting place. It did not scratch fortunately, in my case at least.
2. I installed this sight on an ADCOR. The ADCORs have an obstruction at the front-end of the rail, so this sight had to come to its resting place from the back of the rail. In the case of my ADCOR that meant sliding the sight in from the bolt release latch because the ADCORs have a continuous rail. It worked fine, but again, apply oil on both sides of the rail, all the way, to decrease the chances of scratching it.
Remember, once you put the screw in but before you tighten it, to push the sight forward such that the screw touches the picatinny rail.

Excellent sight (21/03/2014)

When installing sights do not take the cheap route as it may be the last thing you look at. The Troy fixed front and rear set are quality made, adjust with precision and are very easy to get sight acquisition. I prefer the fixed variety over pop up's with red dot sights or just the iron sights alone, the Troy has stood up to abuse on one of my rifles better than anything tried before. I give the Troy a five star rating.

Troy Fixed Battle Sight (01/06/2014)

Just placed it on a same plane build. The sight itself fit perfectly. Also, the sight acquisition was quick. If I ever do another same plane build, I will purchase this Troy sight. Bye the way, I also purchased the Troy Fixed Rear Battle Sight to go along. I love it. The later will be purchased for future build.

rock solid (27/12/2015)

Have bought and used multiples of this sight with and without the tritium post. Mounts super easy, doesn't have a big o' screw or nut to snag stuff. Beautiful lines, the hood centers in apertures with ease. some sights look like they can tear off of a rail not this one, it has full clamping lips on both sides. Need a sight that is always ready with no exception look no further.

Leer 5 mas calificaciones en brownells.com

109.9 109.9 1 EUR

N.º de producto: 100005211
TROY INDUSTRIES 2" FIXED FRONT BATTLE SIGHT ALUMINUM BLACK
Ref Fabricante: SSIG-FBS-FHBT-0 812699011164 Mira frontal fija montada en riel, en el mismo plano, funciona con cualquier mira trasera plegable estilo AR como respaldo para un visor o punto rojo. Las distintivas orejas en forma de “globo” al estilo HK facilitan la adquisición rápida del objetivo, mientras que la rampa serrada y angulada elimina el deslumbramiento. Ajustable en elevación en incrementos de ½ MOA; el detente de bloqueo positivo asegura que los ajustes solo cambien cuando tú lo desees. La base con abrazadera lateral robusta y perno transversal de acero se acopla a cualquier guardamanos con rieles Picatinny o bloque de gas que esté a la misma altura que el riel del receptor. Se instala con un destornillador plano estándar, sin perillas ni palancas salientes que puedan engancharse con la vegetación, ropa u otro equipo.

109.9 EUR 3 109,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Altura: 2 Color: Black Estilo: Fixed Hacer: AR-15 Material: Aluminio

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Mira frontal fija para AR-15, compatible con cualquier mira trasera plegable estilo AR.
Fabricada en aluminio 6061 T6 anodizado duro, con perno transversal de acero inoxidable y acabado mate negro.
Fácil instalación con destornillador plano estándar; se acopla a rieles Picatinny o bloques de gas a la misma altura que el riel del receptor.

Atributos

Altura: 2 Color: Black Estilo: Fixed Hacer: AR-15 Material: Aluminio Peso de entrega: 0,045kg Altura de envío: 25mm Ancho de envío: 142mm Longitud de envío: 201mm UPC : 812699011164

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Mejora tu puntería con la mira frontal fija AR-15 de TROY INDUSTRIES. 🥇 Ajustable y fácil de instalar, perfecta para cualquier configuración.

Rugged, Reliable, Always Deployed; Globe-Shaped Ears Focus Sight Picture

SPECS: 6061 T6 aluminum, hardcoat anodized, with stainless steel crossbolt, matte black finish. 1¼" (3.18cm) long, 1¼" (3.18cm) wide, 2" (5.08cm) high. 1.5 oz (45g) wt.

Más...

Robusta, Fiable, Siempre Desplegada; Orejas en Forma de Globo para Enfocar la Imagen de la Mira

Más...

Evaluaciones de clientes para TROY INDUSTRIES 2" FIXED FRONT BATTLE SIGHT ALUMINUM BLACK

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 5

NICE!!!! (09/05/2010)

Absolutely great! I have this mounted on my Daniel Defense Lite railed 9mm AR, works great and very sturdy and great target acquisition. The HK style adds some class as well. Highly recommend it.

Solid, no large side screws (28/11/2013)