Mejora tu AR-15 con el Kit de Piezas Bajas ZRO DELTA. Incluye todo lo esencial para tu construcción. 🔧 ¡Hazlo tuyo hoy!
ZRO DELTAAR-15 LOWER PARTS KIT - ZRO DELTA AR-15 LOWER PARTS BUILDER KIT
100500154
Atributos
Tipo de arma:AR-15
Peso de entrega:0,07kg
Altura de envío:25mm
Ancho de envío:76mm
Longitud de envío:114mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Especificaciones:
Hacer: AR-15
69.969.91EUR
69.9EUR69,90 €
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.
N.º de producto: 100500154
N.º fabr.: 7035-0008-1520
El Kit de Piezas Inferiores Mejorado está recubierto de fosfato e incluye todas las piezas fundamentales para el LPK, excepto el Guardapolvo del Gatillo, la Empuñadura y los Ensambles de Control de Fuego.
The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.
El Kit de Piezas Inferiores Mejorado está recubierto de fosfato e incluye todas las piezas fundamentales para el LPK, excepto el Guardapolvo del Gatillo, la Empuñadura y los Ensambles de Control de Fuego.
Atributos
Tipo de arma:AR-15
Peso de entrega:0,07kg
Altura de envío:25mm
Ancho de envío:76mm
Longitud de envío:114mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Opiniones de clientes
Calificaciones de clientes (10)
2,9 / 5
Claramente recomendable
Nice workmanship, Iâm sure mil specs 02/09/2018
The materials that they used look durable/strong,
Iâm sure itâs a mil specs
Ligeramente recomendable
Terrible... 08/08/2018
Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.
No recomendable
Waste of Money 06/02/2018
Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.
Claramente recomendable
For the money...this kit can't be beat! 19/01/2018
I have purchased and used these kits in the past and recently purchased two more. After reading the reviews, I thought I would give my findings. Maybe because I am a gunsmith and an experienced builder, I have not had a single problem! I will be purchasing more.
No recomendable
Poor quality overall 31/12/2017
Same issues as the other reviewers - should've known better than to buy this.
The detents for the takedown grab the takedown pins far more than they should. Took a file to them to round them off a bit to alleviate this.
The safety included had a horrible feel to it - very gritty and more resistance than should be present. Swapped it for another safety lever that I had and the problem went away .
Also worth noting, this kit does not include a grip screw. The picture accurately depicts that, I just overlooked it and could see others overlooking the same. Luckily I had a few extra on hand.
Recomendable con reservas
Get what you pay for 12/12/2017
I bought a few of these. They are nothing special and priced accordingly. I had a bad mag dis connector and they quickly sent me a replacement, kit comes with a very plastic dis connect button. A nice cheap way to finish off your project and get it through the paces, then swap out for better parts later if you see need to. They will probably stay in a while and work fine.
No recomendable
Kind of an odd LPK... 02/09/2017
A few non-standard parts here- for one, the takedown detents are black (not gold) and asymmetrical in shape. The blunt end needs to face the pin, because the pointy end will lock your pin. FCG pins are .155 or greater, and would not pass through a Noveske lower (NBD, I have a pile of standard pins on my bench). Selector detent, also too pointy to interface with the selector (or recess too deep?) maybe they will break in as they grind, but I junked those too. Lastly, the BHO roll pin is a spiral vs. a C (again, no biggie, just strange). I would avoid this product.
Claramente recomendable
Works fine 25/08/2017
Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.
Will buy another for future builds
No recomendable
I do not recommend. 12/05/2017
Kit seemed fine looking it over initially. Once installed the safety selector switch does not smoothly rotate from safe to fire. It feels gritty and takes more force than it should. My other issue is the take down pins. Same issue, they do not smoothly push out and take more force than normal. It's like the detent is binding on the surface of the selector and take down pins. The rest of the kit is fine and I'll make do with the take down pins. The safety selector, I will have to replace for something else. It just feels terrible.
Claramente recomendable
Great quality at a reasonable price! 31/03/2017
Great finish and fit. Not covered in sloppy grease but lightly coated in preservative. Everything fit great! The front pivot pin fit very snugly and took out all the upper/lower slop in two sets I tried it in. I've spent money on National Match and oversized pins and this one worked just as well. I'll buy again for sure.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
Vistos recientemente
¡Ups! Algo salió mal.
Hemos encontrado un error al cargar este contenido. Actualice la página para continuar. Si el problema persiste, póngase en contacto con nuestro servicio de atención al cliente.
*
Los precios incluyen el IVA, y el transporte de EE.UU a España, no incluye el envío a su domicilio.
Mejora tu AR-15 con el Kit de Piezas Bajas ZRO DELTA. Incluye todo lo esencial para tu construcción. 🔧 ¡Hazlo tuyo hoy!
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Los pasadores de tamaño superior aseguran una alineación precisa del martillo y el disparador, garantizando un desenganche limpio y consistente.
Impregnados con molibdeno, reducen la fricción y eliminan la necesidad del resorte J del martillo.
Fabricados en acero para herramientas, vienen en un paquete de dos pasadores pequeños de .156" (3.9mm).
Muelles de reemplazo de alta calidad para AR-15, fabricados por BROWNELLS.
Fabricados con tolerancias precisas y materiales de silicio cromo (CS), igualando o superando las piezas OEM.
Disponibles individualmente o en paquetes de 3, ideales para repuestos de emergencia o montar rifles con piezas sueltas.