Replacement sight sets give your 10/22® a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. For even greater precision, the TSR200 set’s rear sight has a single aperture that uses a rotating dial for fine adjustments in elevation; click adjustable for windage.
SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.
Más...
Los conjuntos de miras de reemplazo le dan a tu 10/22® un radio de mira más largo para un potencial de precisión mejorado, además de ofrecer la misma imagen de mira que un AR-15/M16 con miras de emisión militar. La instalación no requiere armería, perforación/roscado, ni alteraciones permanentes al rifle. La alza trasera se monta utilizando los agujeros proporcionados de fábrica para una base de visor. El conjunto de alza frontal de acero tiene un poste estándar de bloqueo por detente M16 rodeado de orejetas protectoras que lo resguardan de daños y desalineación. El usuario puede sustituir cualquier poste de posventa que reemplace al estándar A2. Para una precisión aún mayor, el conjunto de alza trasera TSR200 tiene una única apertura que utiliza un dial giratorio para ajustes finos en elevación; ajustable con clic para la deriva.
ESPECIFICACIONES: Alza Frontal - acero, pavonado, acabado mate, .53" (13.4mm) de ancho, .90" (23mm) de alto. Alza Trasera - aluminio, acabado negro. 2.9" (7.4cm) de largo, .94" (24mm) de alto. Se venden en conjuntos de alza frontal/trasera. Incluye tornillos de montaje.
Más...
Evaluaciones de clientes para TECH SIGHTS RUGER 10/22 APERTURE TSR200 GI-STYLE SIGHT SET BLACK
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,8
Tech Sights for Ruger 10/22 -(14/04/2011)
Tech Sights are fantastic on the Ruger 10/22. They allow you to zero your rifle so much easier and faster than the factory Ruger sights. Inches, Minutes, Clicks gets the bullet on target. The aperature sight is also more precise to aim. Easy to install on the Ruger 10/22 too. Brownells picked a winner.
Project Appleseed Instructor
Excellent Sight - Great for Appleseed(19/04/2011)
This past weekend I attended my first Appleseed and the instructor let me try his 10/22 with these sights mounted and all I can say is wow. If you are thinking of upgrading your 10/22 iron sights look no further than the TSR 200 GI Type Aperture Sights. These really are a huge improvement over the factory buckhorn sights on the 10/22. I used this rifle only once on the last AQT and shot a score of 203. My 10/22 is getting this set installed as soon funds allow.
TSR200 Perfect Aperture Sight(09/05/2012)
After putting these rugged sights on my son's 10-22, the rifle shot almost dead-on at 25 yards. There's nothing like a set of military-type aperture sights to teach real marksmanship. We had to use aperture sights to qualify on the M-16 rifle when I was in the US Air Force. If only the manufacturer would make the TSR200 for my 77-22 bolt action rifle.
Made even better(14/06/2012)
When they first introduced the TSR100/200 GI type aperture sight for the 1022 years back, both the rear and front sight bases are made of aluminium. I found the front sight protective wings to be a little on the fragile side that it will bend when it bumped hard into a solid object. Now, Tech-Sight made this part an all steel construction to eliminate this problem. They also incorporated tightening screws on both side and rear of the base making it virtually immoveable once locked into place. Both the rear peep sight and front sight post are elevation adjustable providing a lot of room for elevation setting for accurate long distant shooting. Wheter you choose the TSR100 or 200, you cannot go wrong. This is the perfect iron sight for a stock or bull barelled 1022.
Tech Sights â TSR 200 (25/01/2018)
Decent sight once you can get it set. When I first got the sight set, the front sight base dovetail was under sized and would not fit in the Ruger factory dovetail, it just slid through. I packed it up and put it in my parts box. When I acquired a new 10-22 I tried it again, same problem. I called Tech-Sights and the lady stated that the new front sight base was now steel instead of aluminum and would solve the problem. She sent me the new base ($ 15.00) and it did solve it. With a front set screw that spreads the dovetail to fit tightly in the slot and 2 button head screws to lock it in side to side, the sight base is not going anywhere soon. I had trouble seeing the Tall NM post and replaced it with a wider post. Now it shot too high. I raised the front post as far as it would go and about to come out. I then lowered the font sight until the platform was flush and found a tool to lower the rear sight until the aperture was almost below the rear base notch. Now all is good and the rifle is sighted in for 50 yrds. It gives me the same sight picture as my CMP AR-15.
N.º de producto: 100006911 TECH SIGHTS RUGER 10/22 APERTURE TSR200 GI-STYLE SIGHT SET BLACK Ref Fabricante: TSR200 Los conjuntos de miras de reemplazo le dan a tu 10/22® un radio de mira más largo para un potencial de precisión mejorado, además de ofrecer la misma imagen de mira que un AR-15/M16 con miras de emisión militar. La instalación no requiere armería, perforación/roscado, ni alteraciones permanentes al rifle. La alza trasera se monta utilizando los agujeros proporcionados de fábrica para una base de visor. El conjunto de alza frontal de acero tiene un poste estándar de bloqueo por detente M16 rodeado de orejetas protectoras que lo resguardan de daños y desalineación. El usuario puede sustituir cualquier poste de posventa que reemplace al estándar A2. Para una precisión aún mayor, el conjunto de alza trasera TSR200 tiene una única apertura que utiliza un dial giratorio para ajustes finos en elevación; ajustable con clic para la deriva.
144.9EUR0144,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Los conjuntos de miras de reemplazo aumentan el radio de mira del 10/22® para mejorar la precisión y ofrecen una imagen similar a las miras de un AR-15/M16.
La instalación es fácil y no requiere modificaciones permanentes, armería ni perforación/roscado.
El conjunto incluye una alza frontal de acero y una alza trasera de aluminio ajustable con clic para la deriva y un dial giratorio para ajustes finos en elevación.
Atributos
Color:
Black
Estilo:
Apertura
Hacer:
Ruger
Modelo:
10/22
Peso de entrega: 0,068kgAltura de envío: 8mmAncho de envío: 91mmLongitud de envío: 163mm
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
Mejora la precisión de tu RUGER 10/22 con el conjunto de miras TSR200. 🔭 Fácil instalación y ajustes finos para un tiro más certero.
Replacement sight sets give your 10/22® a longer sight radius for improved accuracy potential, plus the same sight picture as an AR-15/M16 with military-issue sights. Installation requires no gunsmithing, no drilling/tapping, and no permanent alterations to the rifle. Rear sight mounts using the factory-provided holes for a scope base. All-steel front sight assembly has a standard detent-locking M16 post surrounded by protective ears that guard it from damage and misalignment. User may substitute any aftermarket post that replaces the standard A2. For even greater precision, the TSR200 set’s rear sight has a single aperture that uses a rotating dial for fine adjustments in elevation; click adjustable for windage.
SPECS: Front Sight - steel, blued, matte finish, .53" (13.4mm) wide, .90" (23mm) high. Rear Sight - aluminum, black finish. 2.9" (7.4cm) long, .94" (24mm) tall. Sold as front/rear sight sets. Includes mounting screws.
Más...
Los conjuntos de miras de reemplazo le dan a tu 10/22® un radio de mira más largo para un potencial de precisión mejorado, además de ofrecer la misma imagen de mira que un AR-15/M16 con miras de emisión militar. La instalación no requiere armería, perforación/roscado, ni alteraciones permanentes al rifle. La alza trasera se monta utilizando los agujeros proporcionados de fábrica para una base de visor. El conjunto de alza frontal de acero tiene un poste estándar de bloqueo por detente M16 rodeado de orejetas protectoras que lo resguardan de daños y desalineación. El usuario puede sustituir cualquier poste de posventa que reemplace al estándar A2. Para una precisión aún mayor, el conjunto de alza trasera TSR200 tiene una única apertura que utiliza un dial giratorio para ajustes finos en elevación; ajustable con clic para la deriva.
ESPECIFICACIONES: Alza Frontal - acero, pavonado, acabado mate, .53" (13.4mm) de ancho, .90" (23mm) de alto. Alza Trasera - aluminio, acabado negro. 2.9" (7.4cm) de largo, .94" (24mm) de alto. Se venden en conjuntos de alza frontal/trasera. Incluye tornillos de montaje.
Más...
Evaluaciones de clientes para TECH SIGHTS RUGER 10/22 APERTURE TSR200 GI-STYLE SIGHT SET BLACK
Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 4,8
Tech Sights for Ruger 10/22 -(14/04/2011)
Tech Sights are fantastic on the Ruger 10/22. They allow you to zero your rifle so much easier and faster than the factory Ruger sights. Inches, Minutes, Clicks gets the bullet on target. The aperature sight is also more precise to aim. Easy to install on the Ruger 10/22 too. Brownells picked a winner.
Project Appleseed Instructor
Excellent Sight - Great for Appleseed(19/04/2011)
This past weekend I attended my first Appleseed and the instructor let me try his 10/22 with these sights mounted and all I can say is wow. If you are thinking of upgrading your 10/22 iron sights look no further than the TSR 200 GI Type Aperture Sights. These really are a huge improvement over the factory buckhorn sights on the 10/22. I used this rifle only once on the last AQT and shot a score of 203. My 10/22 is getting this set installed as soon funds allow.
TSR200 Perfect Aperture Sight(09/05/2012)
After putting these rugged sights on my son's 10-22, the rifle shot almost dead-on at 25 yards. There's nothing like a set of military-type aperture sights to teach real marksmanship. We had to use aperture sights to qualify on the M-16 rifle when I was in the US Air Force. If only the manufacturer would make the TSR200 for my 77-22 bolt action rifle.
Made even better(14/06/2012)
When they first introduced the TSR100/200 GI type aperture sight for the 1022 years back, both the rear and front sight bases are made of aluminium. I found the front sight protective wings to be a little on the fragile side that it will bend when it bumped hard into a solid object. Now, Tech-Sight made this part an all steel construction to eliminate this problem. They also incorporated tightening screws on both side and rear of the base making it virtually immoveable once locked into place. Both the rear peep sight and front sight post are elevation adjustable providing a lot of room for elevation setting for accurate long distant shooting. Wheter you choose the TSR100 or 200, you cannot go wrong. This is the perfect iron sight for a stock or bull barelled 1022.
Tech Sights â TSR 200 (25/01/2018)
Decent sight once you can get it set. When I first got the sight set, the front sight base dovetail was under sized and would not fit in the Ruger factory dovetail, it just slid through. I packed it up and put it in my parts box. When I acquired a new 10-22 I tried it again, same problem. I called Tech-Sights and the lady stated that the new front sight base was now steel instead of aluminum and would solve the problem. She sent me the new base ($ 15.00) and it did solve it. With a front set screw that spreads the dovetail to fit tightly in the slot and 2 button head screws to lock it in side to side, the sight base is not going anywhere soon. I had trouble seeing the Tall NM post and replaced it with a wider post. Now it shot too high. I raised the front post as far as it would go and about to come out. I then lowered the font sight until the platform was flush and found a tool to lower the rear sight until the aperture was almost below the rear base notch. Now all is good and the rifle is sighted in for 50 yrds. It gives me the same sight picture as my CMP AR-15.