Mounts on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Picatinny version has a true, Mil-SPec 1913 Picatinny cut along its entire length and accepts Picatinny rings.
SPECS: Aluminum, black, matte.7½" (19cm) long. 3½ oz. (99 g).
Más...
Montaje Rápido y Fácil para Visores y Puntos de Mira
Se monta en la manija de transporte. El canal de visión abierta permite el uso de miras. Los soportes transversales evitan el aplastamiento. La versión Picatinny tiene un corte verdadero Mil-Spec 1913 Picatinny a lo largo de toda su longitud y acepta anillos Picatinny.
ESPECIFICACIONES: Aluminio, negro, mate. 7½" (19cm) de largo. 3½ oz. (99 g).
Más...
Evaluaciones de clientes para BROWNELLS PICATINNY CARRY HANDLE BASE
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,7
Not bad but not great(09/04/2010)
This mount is OK. To me it does not seem very stable for securing a scope and looks like there would be a lot of movement when fired. It also sticks out about 2 inches from the front of the carry handle and the peep sight hole is not aligned well so you lose some aiming ability but does still work. If I were buying this kind of item again I think I would go with a different one.
Decent Product! Not Plug & Play Though!(09/03/2011)
I agree with the Weaver Rail Review! Rail only has one factory mounting hole that didn't align with the hole in my handle. Overall length is 2" longer than my handle so that could be a plus or minus depending on your needs and cosmetic desires! Factory mounting screw is 1/4-20 thread so drill and tapping a new hole was a breeze if you're so inclined! Overall I was pleased with the rail and would recommend with precautions!
Great AR rail for moving scope forward(19/11/2017)
If you have an AR with the carry handle, and you want to mount a scope further forward than "normal," then this rail works great. It has Picatinny (MIL-STD-1913 rail) slots for the full length of 7.5" and the rail extends about 2.75" in front of the carry handle. This allows you to mount a scope far enough forward on your AR so that you can get a forward cheek weld on your stock while still allowing sufficient eye relief (distance from eye to back end of scope). It fits very well into the carry handle and then fastens in place with a thumb screw that passes through the carry handle hole. The threads are the very standard 1/4x20.
N.º de producto: 080000660 BROWNELLS PICATINNY CARRY HANDLE BASE Ref Fabricante: 100247/100248050806006591 Se monta en la manija de transporte. El canal de visión abierta permite el uso de miras. Los soportes transversales evitan el aplastamiento. La versión Picatinny tiene un corte verdadero Mil-Spec 1913 Picatinny a lo largo de toda su longitud y acepta anillos Picatinny.
54.9EUR10854,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Color: Matte BlackEstilo: PicatinnyHacer: AR-15Material: AluminioNumero de bases: 1-Piece
Base Picatinny de aluminio negro mate de 7½" de largo y 3½ oz de peso.
Compatible con AR-15, se monta en la manija de transporte y permite el uso de miras abiertas.
Diseño Mil-Spec 1913 Picatinny a lo largo de toda su longitud, acepta anillos Picatinny y evita el aplastamiento.
Atributos
Color:
Matte Black
Estilo:
Picatinny
Hacer:
AR-15
Material:
Aluminio
Numero de bases:
1-Piece
Peso de entrega: 0,023kgAltura de envío: 18mmAncho de envío: 23mmLongitud de envío: 203mm
UPC
: 050806006591
Detalles del artículo
Hecho en USA
Mejora tu AR-15 con la base de manija de transporte Picatinny de Brownells. 🛠️ Compatible con miras y anillos Picatinny. ¡Hazlo tuyo!
Mounts on carry handle. Open sight channel allows use of sights. Cross-bar supports prevent crushing. Picatinny version has a true, Mil-SPec 1913 Picatinny cut along its entire length and accepts Picatinny rings.
SPECS: Aluminum, black, matte.7½" (19cm) long. 3½ oz. (99 g).
Más...
Montaje Rápido y Fácil para Visores y Puntos de Mira
Se monta en la manija de transporte. El canal de visión abierta permite el uso de miras. Los soportes transversales evitan el aplastamiento. La versión Picatinny tiene un corte verdadero Mil-Spec 1913 Picatinny a lo largo de toda su longitud y acepta anillos Picatinny.
ESPECIFICACIONES: Aluminio, negro, mate. 7½" (19cm) de largo. 3½ oz. (99 g).
Más...
Evaluaciones de clientes para BROWNELLS PICATINNY CARRY HANDLE BASE
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,7
Not bad but not great(09/04/2010)
This mount is OK. To me it does not seem very stable for securing a scope and looks like there would be a lot of movement when fired. It also sticks out about 2 inches from the front of the carry handle and the peep sight hole is not aligned well so you lose some aiming ability but does still work. If I were buying this kind of item again I think I would go with a different one.
Decent Product! Not Plug & Play Though!(09/03/2011)
I agree with the Weaver Rail Review! Rail only has one factory mounting hole that didn't align with the hole in my handle. Overall length is 2" longer than my handle so that could be a plus or minus depending on your needs and cosmetic desires! Factory mounting screw is 1/4-20 thread so drill and tapping a new hole was a breeze if you're so inclined! Overall I was pleased with the rail and would recommend with precautions!
Great AR rail for moving scope forward(19/11/2017)
If you have an AR with the carry handle, and you want to mount a scope further forward than "normal," then this rail works great. It has Picatinny (MIL-STD-1913 rail) slots for the full length of 7.5" and the rail extends about 2.75" in front of the carry handle. This allows you to mount a scope far enough forward on your AR so that you can get a forward cheek weld on your stock while still allowing sufficient eye relief (distance from eye to back end of scope). It fits very well into the carry handle and then fastens in place with a thumb screw that passes through the carry handle hole. The threads are the very standard 1/4x20.