Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

TROY INDUSTRIES
AR-15/M16 END PLATE SLING MOUNTS

812699010259 100004383

For Secure, Ambidextrous Attachment Of Slings With Push-Button QD Swivels

Replaces factory receiver end plate and provides three secure, ambidextrous attachment points for the push-button QD sling swivel. Made of hardened aluminum with extra metal at the stress points to ensure this mount won’t fail during hard use. Rounded edges resist snagging on sling or other gear. Hardcoat anodized for extra strength and wear resistance, with a matte black finish that matches most factory buffer tubes. Heavy-duty stainless steel swivel accepts slings up to 1¼" wide and allows a full 360° of rotation.

SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼” (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

Más...

Para una Sujeción Segura y Ambidiestra de Eslingas con Giratorios QD de Botón de Presión

Reemplaza la placa final del receptor de fábrica y proporciona tres puntos de sujeción ambidiestros y seguros para el giratorio de eslinga QD con botón de presión. Hecho de aluminio endurecido con metal extra en los puntos de estrés para asegurar que esta montura no falle durante un uso intenso. Los bordes redondeados evitan enganches con la eslinga u otro equipo. Anodizado duro para mayor resistencia y resistencia al desgaste, con un acabado negro mate que combina con la mayoría de los tubos de amortiguación de fábrica. El giratorio de acero inoxidable de alta resistencia acepta eslingas de hasta 1¼" de ancho y permite una rotación completa de 360°.

ESPECIFICACIONES: Montura - Aluminio, anodizado duro, negro mate. Giratorio - Acero inoxidable, acabado negro mate. Acepta eslingas de hasta 1¼” (3.2cm) de ancho. M4 se ajusta a carabinas estilo M4 con culata ajustable.

Más...

Evaluaciones de clientes para TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,7

Quality QD Mount but... (26/11/2011)

I love the QD 1-1/4" sling swivel type attachment and Troy makes quality products. The problem with this one comes when you try and tighten the castle nut on your buffer tube back down after the Troy plate in on there. Depending on the position, not all castle nut wrenches will work on this job. It is also very easy to scratch the threads of your buffer tube or other areas. You cannot use the three contact point type wrench to tighten it down because the QD points are in the way.
So as long as you can get it tightened (I suggest the single contact castle nut wrench) it is a quality made product that looks very nice when installed properly and works as a great attachment point for a 3 point sling setup.

Very difficult to tighten (01/01/2012)

The sling mount itself is great EXCEPT for one major flaw imo - you can't tighten it well with a normal 3-point castle nut wrench because the QD points bulge out. Even with an old style single point wrench it's awkward to do depending on where your notches are when it's time to fully tighten. You may end up having to try and tighten at an angle... and pray it doesn't loosen up with use. Come on Troy, provide better info on this before people buy it, or provide a tool with the sling to simplify this process.

Great product, no install issues (28/08/2012)

This endplate looks great and was easy to install. I had zero issues using the Rock River M4 Stock Wrench (brownells# AR0165)to tighten down the castle nut with this endplate. Can't wait to put a sling on this bad boy...

Quality part (15/09/2012)

Quality product from a quality manufacturer. I really like the option of mounting sling on either side. This product is also compatible with Magpul STR stock allowing quick detach swivel from end plate to mount directly onto stock attachment point

Not 360Â° of rotation (18/11/2013)

No problems installing with standard 3 point armoror's wrench or single point spanner wrench. However, the swivel does not provide for 360Â° of rotation as described. There are limit "stops" milled in just like Troy's rail attachment part 100-005-083WB.

I would have preferred the 360Â° rotation as described in order to allow free movement of a 3-point sling.

Look before buying (28/12/2013)

Hello all,
I don't know if I got a out of spec buffer tube but the castle nut would not let the mount go far enough back without the mount rubbing on the receiver. I had to file flats on the round parts to allow the mount to clear. Also it will not work with an oversized forward assist. Since I filed it I won't be sending it back but will eat the price and order another style. Where the quick detach are need to be set back a little bit

Buyer beware - may not work for your gun (17/01/2015)

I own a lot of Troy products, but this one has left me shaking my head and $40 poorer. I read the previous reviews about issues using a 3-point wrench on the castle nut, but I've dealt with that before on other products and gotten past it with a little ingenuity. Be aware though, you may not even get that far. In building up an SBR, I purchased the LWRC UCIW stock to reduce additional length. The round QD receiver knobs on this end plate will not allow the buffer tube of the UCIW to screw in to the receiver far enough to capture the buffer detent. I even tried to grind the knobs to get enough clearance to be able to rotate the buffer tube to get enough threaded in to the receiver. You'd have to remove so much metal that there would be no structural integrity. I use my rifles for work and I don't need the rifle coming off the sling during an op. Clearly, others have been able to get this on some rifles as I've seen photos, but if you do buy it, test fit it first and don't try to "smith" it in to place. Just return it and get another SPS mount for half the price.

Another great product from Troy! (06/01/2017)

After reading some of the other reviews, I was a little hesitant about ordering this. I'm not a fan of "minor modification required". After disassembly I test fit every thing just to be sure and there was adequate clearance where needed and no excess where not. I installed this on my FN15 in about 15 minutes total and love it. Works great with the Troy single point sling. NOTE: There must be an updated version as the one I received has a third connection point at the bottom rear of part (where the print is in the photo).

Does not fit Ruger SR-762 (17/02/2017)

Great product, well made. Does not fit Ruger SR-762. Had to use a different adaptor.

They work fine! (24/09/2018)

No Sir, my experience with this Troy sling mount is very good. I have used it on mil spec tubes, commercial tubes, and pistol only tubes. This mount worked on all of them. I used the Rock River 3 point wrench to tighten the nut. Those that have complained that it didn't work must of had a tube with shorter then normal threads. It works great. Mine has the attachment points on both sides and one in the middle. I couldn't ask for better

Leer 10 mas calificaciones en brownells.com

89.9 89.9 1 EUR

N.º de producto: 100004383
TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK
Ref Fabricante: SMOU-M4S-00BT-0 812699010259 Reemplaza la placa final del receptor de fábrica y proporciona tres puntos de sujeción ambidiestros y seguros para el giratorio de eslinga QD con botón de presión. Hecho de aluminio endurecido con metal extra en los puntos de estrés para asegurar que esta montura no falle durante un uso intenso. Los bordes redondeados evitan enganches con la eslinga u otro equipo. Anodizado duro para mayor resistencia y resistencia al desgaste, con un acabado negro mate que combina con la mayoría de los tubos de amortiguación de fábrica. El giratorio de acero inoxidable de alta resistencia acepta eslingas de hasta 1¼" de ancho y permite una rotación completa de 360°.

89.9 EUR 2 89,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Rifle Sling Adapter Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Reemplaza la placa final del receptor de fábrica y proporciona tres puntos de sujeción ambidiestros y seguros para el giratorio de eslinga QD con botón de presión.
Hecho de aluminio endurecido con metal extra en los puntos de estrés, y anodizado duro para mayor resistencia y resistencia al desgaste.
El giratorio de acero inoxidable acepta eslingas de hasta 1¼" de ancho y permite una rotación completa de 360°.

Atributos

Color: Black Estilo: Rifle Sling Adapter Material: Steel Peso de entrega: 0,045kg Altura de envío: 13mm Ancho de envío: 84mm Longitud de envío: 97mm UPC : 812699010259

Detalles del artículo

Hecho en USA

Mejora tu AR-15/M16 con el Sling Mount de TROY INDUSTRIES. 🛠️ Montura segura y durable para eslingas de hasta 1¼". ¡Haz tu compra ahora!

For Secure, Ambidextrous Attachment Of Slings With Push-Button QD Swivels

SPECS: Mount - Aluminum, hardcoat anodized, matte black. Swivel - Stainless steel, matte black finish. Accepts slings up to 1¼” (3.2cm) wide. M4 fits M4-style carbines with adjustable buttstock.

Más...

Para una Sujeción Segura y Ambidiestra de Eslingas con Giratorios QD de Botón de Presión

Más...

Evaluaciones de clientes para TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,7

Quality QD Mount but... (26/11/2011)

Very difficult to tighten (01/01/2012)

Great product, no install issues (28/08/2012)

Quality part (15/09/2012)

Not 360Â° of rotation (18/11/2013)

Look before buying (28/12/2013)

Buyer beware - may not work for your gun (17/01/2015)

Another great product from Troy! (06/01/2017)

Does not fit Ruger SR-762 (17/02/2017)

Great product, well made. Does not fit Ruger SR-762. Had to use a different adaptor.

They work fine! (24/09/2018)

Leer 10 mas calificaciones en brownells.com

Los clientes compraron

Mejora tu AR-15 con el culatín ACS-L de Magpul. 🛠️ Ligero, ajustable y cómodo, ideal para maniobrabilidad en el campo.

BROWNELLS

BROWNELLS AR-15 ACS-L STOCK ASSY COLLAPSIBLE MIL-SPEC BLACK
AR-15 ACS-L STOCK ASSY COLLAPSIBLE MIL-SPEC

Culatas

En stock

194,90 €

TROY INDUSTRIES
AR-15/M16 END PLATE SLING MOUNTS

Evaluaciones de clientes para TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

TROY INDUSTRIES AR-15/M16 END PLATE SLING MOUNTS

Evaluaciones de clientes para TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Top takeaways

Atributos

Detalles del artículo

Evaluaciones de clientes para TROY INDUSTRIES M4 OEM SLING MOUNT, BLACK

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

TROY INDUSTRIES
AR-15/M16 END PLATE SLING MOUNTS