One-piece, aluminum mount with integral rings is precision machined to true MIL-STD 1913 Picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm and 34mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 Torx wrenches. 1"/30mm - Approximately 5½" (14cm) long, 1¾" (4.4cm) wide, 21⁄8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), measured from top of receiver rail to bottom of scope. 34mm - 5¾" (14.6cm) long, 115⁄16" (4.9cm) wide, 2½" (6.3cm) overall height. 7 oz. (198g) weight. Height - .760" (1.9cm), measured from top of receiver rail to bottom of scope tube.
Más...
Anillos Desplazados Integrados Para Una Montura Sólida Como Una Roca
Montura de aluminio de una pieza con anillos integrados, mecanizada con precisión según las especificaciones MIL-STD 1913 Picatinny para un ajuste seguro en las raíles de receptores flattop. La altura de los anillos y el desplazamiento hacia adelante son ideales para el uso con visores de largo alivio ocular. Monturas disponibles para tubos de visor de 1"/30mm y 34mm. La montura de 1"/30mm acepta visores con tubos de 30mm y, utilizando las cuñas adaptadoras de polímero incluidas, tubos de 1". Los tornillos de cabeza Torx® (4 en 1"/30mm, 6 en 34mm y 35mm) aseguran cada correa superior del anillo para mantener la óptica firme bajo un fuerte retroceso. La base de longitud completa se sujeta al receptor con cinco pernos transversales igualmente espaciados para un ajuste sólido como una roca y cero movimiento.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. Incluye instrucciones y llaves Torx T15 y T20. 1"/30mm - Aproximadamente 5½" (14cm) de largo, 1¾" (4.4cm) de ancho, 21⁄8" (5.4cm) de alto. Peso de 7.1 oz. (201 g). Eleva un óptico de 30mm .965" (24.5mm), medido desde la parte superior de la raíl del receptor hasta la parte inferior del alcance. 34mm - 5¾" (14.6cm) de largo, 115⁄16" (4.9cm) de ancho, 2½" (6.3cm) de alto en total. Peso de 7 oz. (198g). Altura - .760" (1.9cm), medida desde la parte superior de la raíl del receptor hasta la parte inferior del tubo del alcance.
Más...
Evaluaciones de clientes para J P ENTERPRISES JP FLATTOP SCOPE MOUNT, 1"/30MM
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
JP built to use (19/04/2016)
I used this mount to attach a heavy 34MM scope to a Ruger precision rifle. Objective lens is 50MM and there is sufficient room for any lens cover and you still don't have to run the cheek piece very high at all. This mount is very solid and very lightweight as well. Recoil lug is very solid. Rings hold the optic securely at 15 in-lb with six screws per cap. I really like the fact that there are no big bolts or nuts to obscure vision. I did have burrs in each threaded portion of the base, run the screws in and out once from the "wrong" side before you mount the base to your top rail to clear those out. I don't plan on removing this often but the return to zero should be right on just looking at the design.
Excellent non-QD scope(25/08/2011)
Best AR-15 mount available if you don't need QD. Light but completely solid. Rings lined up perfectly out of the box. I shoot with my cheek on the front edge of a Magpul PRS cheek piece and had room to spare to mount a Leupold 3.5-10x40 Mark 4 on the receiver. Even if you had to hang over the receiver I think 4 bolts would be more than enough to hold this mount. Elevation is the same as a 30mm Larue Tactical LT-104, .09" higher than a 1" LT-104 because of the shims. I needed to raise the cheek piece some for a good site picture but that is better than being too low.
N.º de producto: 452000044 J P ENTERPRISES JP FLATTOP SCOPE MOUNT, 1"/30MM Ref Fabricante: JPFTSM301812872022192 Montura de aluminio de una pieza con anillos integrados, mecanizada con precisión según las especificaciones MIL-STD 1913 Picatinny para un ajuste seguro en las raíles de receptores flattop. La altura de los anillos y el desplazamiento hacia adelante son ideales para el uso con visores de largo alivio ocular. Monturas disponibles para tubos de visor de 1"/30mm y 34mm. La montura de 1"/30mm acepta visores con tubos de 30mm y, utilizando las cuñas adaptadoras de polímero incluidas, tubos de 1". Los tornillos de cabeza Torx® (4 en 1"/30mm, 6 en 34mm y 35mm) aseguran cada correa superior del anillo para mantener la óptica firme bajo un fuerte retroceso. La base de longitud completa se sujeta al receptor con cinco pernos transversales igualmente espaciados para un ajuste sólido como una roca y cero movimiento.
539.9EUR0539,90 €
*
No disponible.
Caracteristicas:Acabado: BlackAltura: 1.45''Diametro del tubo del visor: 1'', 30mmEstilo: Picatinny, Flat TopHacer: AR-15
Montura de aluminio de una pieza con anillos integrados, diseñada para raíles MIL-STD 1913 Picatinny y compatible con tubos de visor de 1"/30mm y 34mm.
Incluye cuñas adaptadoras de polímero para visores de 1" y tornillos de cabeza Torx® para asegurar la óptica bajo retroceso fuerte.
Hecha de aluminio 6061 T6 anodizado duro, negro mate, con instrucciones y llaves Torx T15 y T20 incluidas.
Atributos
Acabado:
Black
Altura:
1.45''
Diametro del tubo del visor:
1'',30mm
Estilo:
Flat Top,Picatinny
Hacer:
AR-15
Peso de entrega: 0,249kgAltura de envío: 56mmAncho de envío: 118mmLongitud de envío: 186mm
UPC
: 812872022192
Detalles del artículo
Hecho en USA
Descubre la montura óptica AR-15/M16 de J P ENTERPRISES. Perfecta para visores de 1"/30mm. ¡Asegura tu óptica con estilo! 🔭
One-piece, aluminum mount with integral rings is precision machined to true MIL-STD 1913 Picatinny specs for a secure fit on flattop receiver rails. Ring height and forward offset are ideal for use with long eye relief scopes. Mounts available for 1"/30mm and 34mm scope tubes. 1"/30mm mount accepts scopes with both 30mm tubes and, using the included polymer adapter shims, 1" tubes. Torx® head screws (4 on 1"/30mm, 6 on 34mm and 35mm) secure each top ring strap to hold the optics tight under heavy recoil. Full-length base clamps to the receiver with five, equally spaced crossbolts for a rock-solid fit and zero movement.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes instructions and T15 and T20 Torx wrenches. 1"/30mm - Approximately 5½" (14cm) long, 1¾" (4.4cm) wide, 21⁄8" (5.4cm) high. 7.1 oz. (201 g) weight. Elevates a 30mm optic .965" (24.5mm), measured from top of receiver rail to bottom of scope. 34mm - 5¾" (14.6cm) long, 115⁄16" (4.9cm) wide, 2½" (6.3cm) overall height. 7 oz. (198g) weight. Height - .760" (1.9cm), measured from top of receiver rail to bottom of scope tube.
Más...
Anillos Desplazados Integrados Para Una Montura Sólida Como Una Roca
Montura de aluminio de una pieza con anillos integrados, mecanizada con precisión según las especificaciones MIL-STD 1913 Picatinny para un ajuste seguro en las raíles de receptores flattop. La altura de los anillos y el desplazamiento hacia adelante son ideales para el uso con visores de largo alivio ocular. Monturas disponibles para tubos de visor de 1"/30mm y 34mm. La montura de 1"/30mm acepta visores con tubos de 30mm y, utilizando las cuñas adaptadoras de polímero incluidas, tubos de 1". Los tornillos de cabeza Torx® (4 en 1"/30mm, 6 en 34mm y 35mm) aseguran cada correa superior del anillo para mantener la óptica firme bajo un fuerte retroceso. La base de longitud completa se sujeta al receptor con cinco pernos transversales igualmente espaciados para un ajuste sólido como una roca y cero movimiento.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. Incluye instrucciones y llaves Torx T15 y T20. 1"/30mm - Aproximadamente 5½" (14cm) de largo, 1¾" (4.4cm) de ancho, 21⁄8" (5.4cm) de alto. Peso de 7.1 oz. (201 g). Eleva un óptico de 30mm .965" (24.5mm), medido desde la parte superior de la raíl del receptor hasta la parte inferior del alcance. 34mm - 5¾" (14.6cm) de largo, 115⁄16" (4.9cm) de ancho, 2½" (6.3cm) de alto en total. Peso de 7 oz. (198g). Altura - .760" (1.9cm), medida desde la parte superior de la raíl del receptor hasta la parte inferior del tubo del alcance.
Más...
Evaluaciones de clientes para J P ENTERPRISES JP FLATTOP SCOPE MOUNT, 1"/30MM
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 5
JP built to use (19/04/2016)
I used this mount to attach a heavy 34MM scope to a Ruger precision rifle. Objective lens is 50MM and there is sufficient room for any lens cover and you still don't have to run the cheek piece very high at all. This mount is very solid and very lightweight as well. Recoil lug is very solid. Rings hold the optic securely at 15 in-lb with six screws per cap. I really like the fact that there are no big bolts or nuts to obscure vision. I did have burrs in each threaded portion of the base, run the screws in and out once from the "wrong" side before you mount the base to your top rail to clear those out. I don't plan on removing this often but the return to zero should be right on just looking at the design.
Excellent non-QD scope(25/08/2011)
Best AR-15 mount available if you don't need QD. Light but completely solid. Rings lined up perfectly out of the box. I shoot with my cheek on the front edge of a Magpul PRS cheek piece and had room to spare to mount a Leupold 3.5-10x40 Mark 4 on the receiver. Even if you had to hang over the receiver I think 4 bolts would be more than enough to hold this mount. Elevation is the same as a 30mm Larue Tactical LT-104, .09" higher than a 1" LT-104 because of the shims. I needed to raise the cheek piece some for a good site picture but that is better than being too low.