The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Magpul’s lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in the U.S.A. FEATURES Designed for streamlined storage until deployment Folded, the sleek housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide Leg extensions slide and lock securely with the push of a button and a tool-less knurled bipod locking knob allows easy adjustment between shots Legs extend from 6.8” to 10.3” with seven locking detents Spring-tensioned legs stow forward when not in use, and then quickly snap down and lock into place with one hand Legs accept most Atlas pattern bipod replaceable feet to best match the needs of your environment SPECS Attachment: 1913 Picatinny Rails Materials: Steel, Mil-Spec hard anodized 6061 T-6 aluminum, polymer Height, max: 10.45"" Pan and Tilt: 50° tilt and 40° pan Weight: 11 oz.
Más...
169.9169.92EUR
New
N.º de producto: 100029338 MAGPUL PICATINNY BIPOD FLAT DARK EARTH Ref Fabricante: MAG941-FDE840815119340
169.9EUR72169,90 €
*
Plazo de entrega de aproximadamente 6-10 días. 4 pcs. en el almacén de Europa
Caracteristicas:Altura: 6.3 to 10.3Attachment: PicatinnyColor: Flat Dark EarthEstilo: SwivelFeet Material: RubberFolding: YesPeso: 11.0 oz
El bípode Magpul es ligero (11 oz.) y está construido con aluminio 6061 T6 anodizado duro, acero inoxidable y polímero reforzado, garantizando durabilidad y resistencia.
Ofrece una inclinación de 50° y un giro de 40°, ajustables sin herramientas, permitiendo configuraciones rápidas y silenciosas con una sola mano.
Disponible en cuatro configuraciones de montaje: MIL-STD 1913 Picatinny, M-LOK®, A.R.M.S 17S y QD Sling Swivel Stud, y en dos colores: Negro y Flat Dark Earth (FDE).
Atributos
Altura:
6.3 to 10.3
Attachment:
Picatinny
Color:
Flat Dark Earth
Estilo:
Swivel
Feet Material:
Rubber
Folding:
Yes
Peso:
11.0 oz
Peso de entrega: 0,454kgAltura de envío: 74mmAncho de envío: 99mmLongitud de envío: 241mm
UPC
: 840815119340
Detalles del artículo
Hecho en USA
New
N.º de producto: 100029337 MAGPUL PICATINNY BIPOD BLACK Ref Fabricante: MAG941-BLK840815119333
169.9EUR0169,90 €
*
Plazo de entrega de aproximadamente 6-10 días. Más de 10 pcs. en el almacén de Europa
Caracteristicas:Altura: 6.3 to 10.3Attachment: PicatinnyColor: BlackEstilo: SwivelFeet Material: RubberFolding: YesPeso: 11.0 oz
The Magpul Bipod for 1913 Picatinny Rail offers serious strength and versatility at a price that provides unmatched value. Magpul’s lightweight Mil-Spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. Its low-profile design conceals its internal mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between user configurations. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Its aluminum and stainless steel components, along with its injection-molded reinforced polymer, ensure years of dependable performance and reliability, all while shaving weight. It's extremely light weight, at just over 11 oz. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend 3.5 inches, from 6.8” to 10.3”. An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs. It also has the exclusive ability to lock pan at 0° while maintaining full tilt functionality. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide. Anodized surfaces and tight, precision tolerances mitigate squeaks and rattles. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style. Made in the U.S.A. FEATURES Designed for streamlined storage until deployment Folded, the sleek housing and legs fit neatly under the barrel and are just under 2.3” deep and 3.3” wide Leg extensions slide and lock securely with the push of a button and a tool-less knurled bipod locking knob allows easy adjustment between shots Legs extend from 6.8” to 10.3” with seven locking detents Spring-tensioned legs stow forward when not in use, and then quickly snap down and lock into place with one hand Legs accept most Atlas pattern bipod replaceable feet to best match the needs of your environment SPECS Attachment: 1913 Picatinny Rails Materials: Steel, Mil-Spec hard anodized 6061 T-6 aluminum, polymer Height, max: 10.45"" Pan and Tilt: 50° tilt and 40° pan Weight: 11 oz.