Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup “iron” sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.
Más...
Monta una Óptica y Conserva los Iron Sights
La ligera riel Picatinny de aluminio reemplaza la costilla/rear sight de fábrica y te permite montar una óptica manteniendo la ventaja de tener un “iron” sight de respaldo. Ocho cross-slots te permiten posicionar la óptica para obtener el mejor alivio de ojo. La rear sight abierta integral se ajusta para viento y elevación. Perforada para coincidir con el espaciado de los agujeros de fábrica y utilizar los tornillos originales de la costilla/rear sight de fábrica.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. Aproximadamente 5" (12.7cm) de largo, 13⁄16" (21mm) de ancho, 15⁄32" (12mm) de alto desde la parte superior del receptor.
Más...
Evaluaciones de clientes para TACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 4,7
Buckmark Tactical Solutions Rail(24/02/2011)
Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.
Awesome Rail(02/06/2011)
I put a Burris Fastfire II on mine and I love it. It is durable and rugged.
great rail, but no fiber optic options(30/01/2013)
I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings. I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).
N.º de producto: 100005205 TACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT Ref Fabricante: BMSR-INT879971001350 La ligera riel Picatinny de aluminio reemplaza la costilla/rear sight de fábrica y te permite montar una óptica manteniendo la ventaja de tener un “iron” sight de respaldo. Ocho cross-slots te permiten posicionar la óptica para obtener el mejor alivio de ojo. La rear sight abierta integral se ajusta para viento y elevación. Perforada para coincidir con el espaciado de los agujeros de fábrica y utilizar los tornillos originales de la costilla/rear sight de fábrica.
149.9EUR10149,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Color: BlackEstilo: PicatinnyHacer: BrowningMaterial: AluminioModelo: Buck MarkNumero de bases: 1-Piece
La riel Picatinny de aluminio reemplaza la costilla/rear sight de fábrica, permitiendo montar una óptica y mantener un “iron” sight de respaldo.
Ocho cross-slots permiten posicionar la óptica para el mejor alivio de ojo, y la rear sight abierta integral se ajusta para viento y elevación.
Fabricada en aluminio 6061 T6 anodizado duro, negro mate, mide aproximadamente 5" de largo, 13⁄16" de ancho y 15⁄32" de alto desde la parte superior del receptor.
Atributos
Color:
Black
Estilo:
Picatinny
Hacer:
Browning
Material:
Aluminio
Modelo:
Buck Mark
Numero de bases:
1-Piece
Peso de entrega: 0,045kgAltura de envío: 5mmAncho de envío: 84mmLongitud de envío: 201mm
UPC
: 879971001350
Detalles del artículo
Hecho en USA
Mejora tu Browning Buck Mark con el riel Picatinny ligero de Tactical Solutions. 🛠️ Monta ópticas y mantén el iron sight. ¡Optimiza tu tiro!
Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup “iron” sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.
Más...
Monta una Óptica y Conserva los Iron Sights
La ligera riel Picatinny de aluminio reemplaza la costilla/rear sight de fábrica y te permite montar una óptica manteniendo la ventaja de tener un “iron” sight de respaldo. Ocho cross-slots te permiten posicionar la óptica para obtener el mejor alivio de ojo. La rear sight abierta integral se ajusta para viento y elevación. Perforada para coincidir con el espaciado de los agujeros de fábrica y utilizar los tornillos originales de la costilla/rear sight de fábrica.
ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. Aproximadamente 5" (12.7cm) de largo, 13⁄16" (21mm) de ancho, 15⁄32" (12mm) de alto desde la parte superior del receptor.
Más...
Evaluaciones de clientes para TACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 4,7
Buckmark Tactical Solutions Rail(24/02/2011)
Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.
Awesome Rail(02/06/2011)
I put a Burris Fastfire II on mine and I love it. It is durable and rugged.
great rail, but no fiber optic options(30/01/2013)
I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings. I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).