Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

CROSSTAC
CROSS TAC CORP CAR-15/M4 AMBI SINGLE-POINT SLING CONNECTOR

852741000685 100003181

Ultra-Low Profile, Snag-Free Design

Minimal profile sling adapter plate provides secure, ambidextrous attachment for single-point tactical slings on carbines or converted shotguns with M4 collapsible buttstocks. The attachment loop centers under the receiver extension nut, out of the way, where it can’t snag on clothing, gear, brush or the sling, and won’t interfere with access to the selector lever. Helps weapon hang flat against your body when released, yet also allows fast, positive re-grip when needed. Accepts most sling hooks, including MASH hooks, H&K connectors, and ZM-style clasps. Fits M4-type collapsible stocks with mil-spec and commercial buffer tubes, including shotgun conversions that use the M4 tube. Precision machined from high-quality steel, then Parkerized dark gray for wear resistance and a close match to factory rifle finishes.

SPECS: Steel, black, matte, Parkerized finish.

Más...

Diseño Ultra-Perfil Bajo, Sin Enganches

La placa adaptadora de perfil mínimo ofrece una sujeción segura y ambidiestra para correas tácticas de un solo punto en carabinas o escopetas convertidas con culatas plegables M4. El lazo de sujeción se centra bajo la tuerca de extensión del receptor, fuera del camino, donde no puede engancharse con la ropa, el equipo, la vegetación o la correa, y no interfiere con el acceso a la palanca selectora. Ayuda a que el arma quede plana contra el cuerpo cuando se suelta, pero también permite un re agarre rápido y positivo cuando es necesario. Acepta la mayoría de los ganchos para correas, incluyendo ganchos MASH, conectores H&K y cierres estilo ZM. Compatible con culatas plegables tipo M4 con tubos de amortiguador mil-spec y comerciales, incluyendo conversiones de escopetas que usan el tubo M4. Mecanizado con precisión a partir de acero de alta calidad y luego Parkerizado en gris oscuro para resistencia al desgaste y una coincidencia cercana a los acabados de fábrica de los rifles.

ESPECIFICACIONES: Acero, negro, mate, acabado Parkerizado.

Más...

Evaluaciones de clientes para CROSSTAC SINGLE-POINT SLING ADAPTER

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 4,5

Minimul bulk, and gets the job done. (05/09/2009)

This thing is great. You don't have the bulk of loops sticking out near the charging handle and it's completely ambidextrous.

May not be able to use all 6 positions (06/09/2009)

I just built another carbine using this item with a 6-position mil-spec tube and Magpul MOE mil-spec stock. After install was done, I found the stock wouldn't go all the way forward as it hits against the sling connection point. I tried backing the tube out but it was already at the proper depth in order to engage the buffer retainer. 5 out of 6 positions on the stock isn't a huge deal for me personally but somebody else may feel shorted. I would only recommend this to another user if they are aware of the above limitations on stock positions. Does it work for a single point sling attachment? Yes.

Great No-snag design (25/11/2010)

Installed this on 2 of my 5 ARs and it beats most other designs for single point sling attachment. The ones with eyelets off to the side get hung up on your vest and clothing and ruin the sleek lines of your rifle. The only modification you need to make to your stock is remove a very small ammount of material if you wish to use the shortest setting on your 6 position stock. Very unnoticable.

Like it (16/02/2011)

With the exception already mentioned of not being able to collaspe the stock all the way I like this better. You're not stuck with the sling being on one side of the rifle. I switched shoulders on occasion this allow me to do that much easier.

Good design (14/05/2011)

Great product. Works as specified, well design. Product fits out of the way and does not catch on clothing. Works well for both left and right handed shooters.

GREAT PRODUCT (27/06/2011)

Installed this on my AR and it beats most other designs for single point sling attachment. Dose not get hungup on clothing & Tactical Vest & other equipment when making forced entries (Yes I Am A Police Officer). The only modification you need to make to your stock is remove a small ammount of material where the adaptor rest against the stock if you wish to use the shortest setting on your 6 position stock. This I did with a Dremmil Tool In About 15 Secounds Very unnoticable. I recomend this item to all Law Enforcement Officers.

Strong sling mount, made in USA. (07/02/2012)

Very well built sling mount. Solid high strength steel, made in USA. Non-protrusive sling mount, nothing sticking out of the footprint of the gun. Accepts any sling hook or pin adapter. I use a mash hook and single point Viper sling. Very comfortable after hours of use. Works for lefties too. Highly recommended.

Works great, no snags (07/03/2012)

Does exactly what I needed without being noisy like the Magpul ASAP, and without messing with the lines of the rifle or snagging on clothing.

Low Profile Sling Adapter (13/07/2016)

This sling adapter works very well on my S&W M&P15 carbine. I bought it because other adapters or the sling would interfere with the back of my firing hand. This is low profile and is a good fit for my single-point sling.

Works perfect with B5 Bravo Stock (19/11/2017)

This is a rock solid single point sling adaptor end plate.

Both anti rotation areas which stabilize the buffer tube and the end plate itself are not added on, they are solid extensions of the plate.

Dimensions and tolerances are perfect.

As it is already stated, most of the buttstocks will not go down to the castle nut and lock to the first notch on the buffer tube, but the shorter buttstocks such as B5 Bravo buttstock work perfect with the loop. This con is the only reason keeping me giving five stars to this product.

And yes, I recommend it to whom are looking for a low profile, minimalist single point sling adaptor.

Leer 10 mas calificaciones en brownells.com

39.9 39.9 1 EUR

New

N.º de producto: 100003181
CROSSTAC SINGLE-POINT SLING ADAPTER
Ref Fabricante: 135020-BLK 852741000685 La placa adaptadora de perfil mínimo ofrece una sujeción segura y ambidiestra para correas tácticas de un solo punto en carabinas o escopetas convertidas con culatas plegables M4. El lazo de sujeción se centra bajo la tuerca de extensión del receptor, fuera del camino, donde no puede engancharse con la ropa, el equipo, la vegetación o la correa, y no interfiere con el acceso a la palanca selectora. Ayuda a que el arma quede plana contra el cuerpo cuando se suelta, pero también permite un re agarre rápido y positivo cuando es necesario. Acepta la mayoría de los ganchos para correas, incluyendo ganchos MASH, conectores H&K y cierres estilo ZM. Compatible con culatas plegables tipo M4 con tubos de amortiguador mil-spec y comerciales, incluyendo conversiones de escopetas que usan el tubo M4. Mecanizado con precisión a partir de acero de alta calidad y luego Parkerizado en gris oscuro para resistencia al desgaste y una coincidencia cercana a los acabados de fábrica de los rifles.

39.9 EUR 99 39,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Black Estilo: Rifle Sling Adapter Hacer: AR-15 Material: Steel

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

La placa adaptadora de perfil mínimo proporciona una sujeción segura y ambidiestra para correas tácticas de un solo punto en carabinas o escopetas con culatas plegables M4.
Compatible con la mayoría de los ganchos para correas, incluyendo MASH, conectores H&K y cierres estilo ZM, y con tubos de amortiguador mil-spec y comerciales.
Fabricada con acero de alta calidad y acabado Parkerizado en gris oscuro, ofrece resistencia al desgaste y se asemeja a los acabados de fábrica de los rifles.

Atributos

Color: Black Estilo: Rifle Sling Adapter Hacer: AR-15 Material: Steel Peso de entrega: 0,005kg Altura de envío: 25mm Ancho de envío: 83mm Longitud de envío: 146mm UPC : 852741000685

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

Descubre el adaptador de correa CROSSTAC para tu carabina M4. 🛠️ Diseño ambidextro y seguro, ideal para un agarre rápido y cómodo.

Ultra-Low Profile, Snag-Free Design

SPECS: Steel, black, matte, Parkerized finish.

Más...

Diseño Ultra-Perfil Bajo, Sin Enganches

ESPECIFICACIONES: Acero, negro, mate, acabado Parkerizado.

Más...

Evaluaciones de clientes para CROSSTAC SINGLE-POINT SLING ADAPTER

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 4,5

Minimul bulk, and gets the job done. (05/09/2009)

This thing is great. You don't have the bulk of loops sticking out near the charging handle and it's completely ambidextrous.

May not be able to use all 6 positions (06/09/2009)

Great No-snag design (25/11/2010)

Like it (16/02/2011)

Good design (14/05/2011)

Great product. Works as specified, well design. Product fits out of the way and does not catch on clothing. Works well for both left and right handed shooters.

GREAT PRODUCT (27/06/2011)