Features: Ensure tube feeds smooth and has zero binding Available in 12 and 20 gauge Features a red finish Machined from aluminum Fits most shotgun magazine tubes Will not fit Mossberg shotguns
SPECS: Fits most shotgun extension tubes. Does not fit Mossberg shotguns.
Más...
Características: Garantiza una alimentación suave del tubo y evita cualquier atasco Disponible en calibres 12 y 20 Acabado en rojo Fabricado en aluminio Apto para la mayoría de tubos de cargador de escopetas No compatible con escopetas Mossberg
ESPECIFICACIONES: Apto para la mayoría de tubos de extensión de escopetas. No compatible con escopetas Mossberg.
Más...
Evaluaciones de clientes para NORDIC COMPONENTS LOW-DRAG FOLLOWER, 20 GA.
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 2,7
Terrible product(24/09/2014)
Nothing about this product is good. First of all, the description is wrong. The 20 gauge follower I recieved had a green finish not a red, not that it really matters. The first problem with this follower is its too long. Using this follower reduced my magazine capacity by 1 shell. The bigger problem is that loading the magazine with this follower goes smoothly the first time but as soon as you empty the magazine the follower gets jammed at the end. The follower is not tapered enough and requires serious force to unjam for additional reloads. I wouldn't reccomend this product to my worst enemy.
Don't waste your time (03/10/2014)
This product plain out stinks. Too long, wrong dimensions, gets jammed, reduces mag capacity. Save yourself the hassle and buy the Brownells stainless slotted follower.
Save your money(05/11/2015)
Does not fit my Ithaca model 37. Useless to me.
Will Not Fit FN SLP Shotguns(25/06/2013)
Even though it is not stated in the description, this part will not work in the FN SLP family of shotguns. The slight extension that is stamped 'made in the usa' will interfere with the lifter.
fits Benelli Supernova(21/07/2013)
Nice upgrade from stock follower. Oddly, the Nordic site says that it does not fit the SN, but it fits perfectly.
They fit KelTec KSG(18/07/2014)
They fit the Kel-Tec KSG shotgun, both with the original springs as well as with the Wolff 65165 6A 12 GA. XP Mag tube springs.
N.º de producto: 100011062 NORDIC COMPONENTS LOW-DRAG FOLLOWER, 20 GA. Ref Fabricante: FOL-SG-20816696021218 Características: Garantiza una alimentación suave del tubo y evita cualquier atasco Disponible en calibres 12 y 20 Acabado en rojo Fabricado en aluminio Apto para la mayoría de tubos de cargador de escopetas No compatible con escopetas Mossberg
Calibre:
20 Gauge
Hacer:
Universal Shotguns
Peso de entrega: 0,113kgAltura de envío: 10mmAncho de envío: 76mmLongitud de envío: 102mm
UPC
: 816696021218
Detalles del artículo
Hecho en USA
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 100011061 NORDIC COMPONENTS LOW-DRAG FOLLOWER, 12GA. Ref Fabricante: FOL-SG-12816696021201 Características: Garantiza una alimentación suave del tubo y evita cualquier atasco Disponible en calibres 12 y 20 Acabado en rojo Fabricado en aluminio Apto para la mayoría de tubos de cargador de escopetas No compatible con escopetas Mossberg
Features: Ensure tube feeds smooth and has zero binding Available in 12 and 20 gauge Features a red finish Machined from aluminum Fits most shotgun magazine tubes Will not fit Mossberg shotguns
SPECS: Fits most shotgun extension tubes. Does not fit Mossberg shotguns.
Más...
Características: Garantiza una alimentación suave del tubo y evita cualquier atasco Disponible en calibres 12 y 20 Acabado en rojo Fabricado en aluminio Apto para la mayoría de tubos de cargador de escopetas No compatible con escopetas Mossberg
ESPECIFICACIONES: Apto para la mayoría de tubos de extensión de escopetas. No compatible con escopetas Mossberg.
Más...
Evaluaciones de clientes para NORDIC COMPONENTS LOW-DRAG FOLLOWER, 20 GA.
Número de evaluaciones: 6
De brownells.com: 6
Evaluación media: 2,7
Terrible product(24/09/2014)
Nothing about this product is good. First of all, the description is wrong. The 20 gauge follower I recieved had a green finish not a red, not that it really matters. The first problem with this follower is its too long. Using this follower reduced my magazine capacity by 1 shell. The bigger problem is that loading the magazine with this follower goes smoothly the first time but as soon as you empty the magazine the follower gets jammed at the end. The follower is not tapered enough and requires serious force to unjam for additional reloads. I wouldn't reccomend this product to my worst enemy.
Don't waste your time (03/10/2014)
This product plain out stinks. Too long, wrong dimensions, gets jammed, reduces mag capacity. Save yourself the hassle and buy the Brownells stainless slotted follower.
Save your money(05/11/2015)
Does not fit my Ithaca model 37. Useless to me.
Will Not Fit FN SLP Shotguns(25/06/2013)
Even though it is not stated in the description, this part will not work in the FN SLP family of shotguns. The slight extension that is stamped 'made in the usa' will interfere with the lifter.
fits Benelli Supernova(21/07/2013)
Nice upgrade from stock follower. Oddly, the Nordic site says that it does not fit the SN, but it fits perfectly.
They fit KelTec KSG(18/07/2014)
They fit the Kel-Tec KSG shotgun, both with the original springs as well as with the Wolff 65165 6A 12 GA. XP Mag tube springs.