Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

ACCURACY SYSTEMS
MINI-14®/MINI-30® EXTENDED MAGAZINE RELEASE

100001314

Extended Length Gives Added Leverage For Easy Reloads

1¾" long mag release installs without any modifications to your gun to prevent fumbling during reloads. Especially great for Mini-14® and Mini-30® with high-capacity magazines. Contours to your finger to let you release your magazine by feel alone. Available in blued steel or stainless steel to match your gun.

SPECS: Steel, blued or stainless steel (SS). Approximately 1¾" (4.4cm) long, 23/64" (9.1mm) wide.

Más...

Largo extendido proporciona palanca adicional para recargas fáciles

El liberador de cargador de 1¾" de largo se instala sin ninguna modificación en tu arma para evitar dificultades durante las recargas. Especialmente ideal para Mini-14® y Mini-30® con cargadores de alta capacidad. Se adapta a tu dedo para permitirte liberar tu cargador solo con el tacto. Disponible en acero azulado o acero inoxidable para combinar con tu arma.

ESPECIFICACIONES: Acero, azulado o acero inoxidable (SS). Aproximadamente 1¾" (4.4cm) de largo, 23/64" (9.1mm) de ancho.

Más...

Evaluaciones de clientes para ACCURACY SYSTEMS MAGAZINE RELEASE, BLUE

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,8

Great upgrade! (31/05/2011)

This is a very nice upgrade for the Mini 14/30. After reading other customer reviews, I was hesitant to make the purchase because the install was somewhat involveed. I watched a few videos and read some information online and decided to go for it.
It does require disassembly of the trigger assembly, and you do need a slave pin. I was able to use an 8 penny nail, and cut it to the width of the release. It held the spring in place until I could line up the holes and replace the slave pin with the Ruger pin. It was not incredibly difficult and works like a charm!

easy install just dont get in a hurry (16/07/2012)

works great took 10 minutes to install. no issues, use a slave pin , i used a piece of a butt connecter cut to size ,

Great addition to an American classic (07/03/2016)

I was more than impressed with the ASI magazine release. I noticed a big improvement in my magazine changes. The installation took less than 10 minutes with the use of a guide pin. The only negatives are that it did not include a guide pin and once installed you are unable to use the Thermold 30rd magazines.

Nice Mag Release (24/06/2010)

This is a great Mag Release. It is much easier to release high cap mags. It was a PITA to install, however. Instructions were nill and I had to rely on books and DVDs that I purchased to help. Simple part, but took major time to install. I had to do some custom filing to make it fit. I was installing on a low number Ranch Mini. It might be easier to fit on a newer model. or Maybe its just me....

No Sir (29/07/2010)

The slot in the back of this extension that holds the mag release spring is to shallow causing it to bind the spring making the spring not expand to hold tension on the mag. In all it ruined my mag release spring, cut my thumb and ticked me off for the rest of the night!! However it aught to work fine after I order a new spring and get a gunsmith to modify my release ext and put it all back together for me. Cause I don't feel like messing with it now.

Leer 5 mas calificaciones en brownells.com

44.9 44.9 2 EUR

Sale

N.º de producto: 100001314
ACCURACY SYSTEMS MAGAZINE RELEASE, BLUE
Ref Fabricante: NONE El liberador de cargador de 1¾" de largo se instala sin ninguna modificación en tu arma para evitar dificultades durante las recargas. Especialmente ideal para Mini-14® y Mini-30® con cargadores de alta capacidad. Se adapta a tu dedo para permitirte liberar tu cargador solo con el tacto. Disponible en acero azulado o acero inoxidable para combinar con tu arma.

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Hacer: Ruger Modelo: Mini-30, Mini-14

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El liberador de cargador de 1¾" de largo se instala sin modificaciones en tu Mini-14® o Mini-30®.
Ideal para recargas rápidas con cargadores de alta capacidad, adaptándose a tu dedo para una liberación táctil.
Disponible en acero azulado o acero inoxidable para combinar con tu arma.

Atributos

Hacer: Ruger Modelo: Mini-14,Mini-30 Peso de entrega: 0,005kg Ancho de envío: 57mm Longitud de envío: 89mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x

N.º de producto: 100001315
ACCURACY SYSTEMS MAGAZINE RELEASE, SS
Ref Fabricante: NONE El liberador de cargador de 1¾" de largo se instala sin ninguna modificación en tu arma para evitar dificultades durante las recargas. Especialmente ideal para Mini-14® y Mini-30® con cargadores de alta capacidad. Se adapta a tu dedo para permitirte liberar tu cargador solo con el tacto. Disponible en acero azulado o acero inoxidable para combinar con tu arma.

44.9 EUR 0 44,90 € *

Notificar sobre disponibilidad

No disponible.

Caracteristicas: Hacer: Ruger Modelo: Mini-30, Mini-14

Añadir a la lista de favoritos.

Preguntas