Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

935 SAFETY KIT

050806109216 080000564

Shaped For Easy, No-Slip Operation; Made From Hardened Steel To Last

Includes the Brownells Enhanced Safety Button and the other parts in the safety system that get worn, dinged up, or lost. Replace everything at the same time to ensure smooth, positive, reliable operation of this critical component. Safety button screw also sold separately, so you don’t have to buy a whole new kit if the screw gets damaged during installation.

SPECS: Kit includes enhanced safety button, button screw, detent plate, detent ball, detent spring, and installation instructions. Fits Mossberg 500/590/835/930/935 shotguns.

Más...

Diseñado para una Operación Fácil y Antideslizante; Hecho de Acero Endurecido para Durar

Incluye el Botón de Seguridad Mejorado de Brownells y las demás piezas del sistema de seguridad que se desgastan, se dañan o se pierden. Reemplaza todo al mismo tiempo para asegurar un funcionamiento suave, positivo y fiable de este componente crítico. El tornillo del botón de seguridad también se vende por separado, así que no necesitas comprar un kit nuevo completo si el tornillo se daña durante la instalación.

ESPECIFICACIONES: El kit incluye botón de seguridad mejorado, tornillo del botón, placa de retén, bola de retén, resorte de retén e instrucciones de instalación. Compatible con escopetas Mossberg 500/590/835/930/935.

Más...

Evaluaciones de clientes para BROWNELLS MOSSBERG 500/590/835/930/935 ENHANCED SAFETY KIT

Número de evaluaciones: 8
De brownells.com: 8
Evaluación media: 4,1

Great replacement (07/04/2011)

Nice and sturdy and well made. Getting the original plastic safety switch off wasn't too hard. I just had to cut into it with a Dremel, then snap it off the rest of the way, using some pliers. Then, using pliers, remove the original screw. This is all necessary because it's a one-way, security-type screw that isn't made to be removed. I'd hate to have to try to remove this new one, since cutting into it would be a pain, but I don't see that being an issue. I think I'd have preferred a normally slotted screw with some loctite, instead of the one-way security screw, though, just in case. Overall, another great product from Brownell's.

great (18/08/2011)

easy to install
great when wearing gloves
it's sturdy.

Worth the wait (27/09/2012)

Easy to install, my son did it by himself. Much easier to use than stock safety.

Works better than original (09/04/2017)

Would hav given 5 star but no instructions. They give u a web site that doesnt exist

Excellent Upgrade! (27/09/2017)

The original safety was not smooth and required excessive force to move. If your hands were wet/slippery you would have a hard time engaging/disengaging the safety.

I bought this and installed it on my 590 to facilitate rapid engagement/disengagement of my safety while shooting 3 Gun.

This piece is solid, and installation was simple after watching a YouTube video. The hardest part was the removal of the factory because the screw is a one-way head. Take your time and be careful.

This safety is very positive, and easily engages/disengages with the flip of your thumb, vast improvement over the factory.

"One way" screw? Really?! (20/06/2013)

I own a Mossberg 590, hence, I own one of these. I no longer use it, as I loath it. I bought a Brownells Enhanced Safety Button and installed it after removal of this screw. Some people have had much trouble removing this stupid screw, as it's designed to not be readily removable. Mine came out in seconds with a smithing quality wide blade flat head. I didn't know the pitch or diameter, so I took the safety block it threads into and hunted through thousands of old screws in my garage. I found one with similar threads and proceeded to remill it to work. Now I have a hardened high chrome content steel screw for my safety (cold blued). And this, this "factory screw" is relegated to a deep, dark recess. Known only as The Trench. I give it three stars only because it in fact fits.

Part fits perfect (28/03/2016)

When plumber gunsmiths come to me and say ' I've stripped a screw on the Mossberg 835...I stop and say you tried to unscrew it didn't you? Well yeah. Go back to apprenticing they're made that way. I just cut a rut in the flattened head and backed it out with a hammer and a forester flat head. New button screw...good as new!

Not A Good Value (16/10/2016)

I bought this for a model 500 ATP. All I had was a broken safety button, but decided to get all new parts. The description is vague, just reads "metal". I'm thinking from Brownells, it's Steel. Well, maybe aluminum or pot metal. It doesn't stick to a magnet, so who knows.

Second, the detent spring is twice the length of the original. Can't use the new spring. Last, a no tamper screw ? Really ?

Don't waste your money on this. It cost me $36 for the safety button, a buggered up screw (because it's a one way), and a little metal ball. I should have just bought the safety button being that's all I needed.

Leer 8 mas calificaciones en brownells.com

79.9 79.9 1 EUR

N.º de producto: 080000564
BROWNELLS MOSSBERG 500/590/835/930/935 ENHANCED SAFETY KIT 050806109216 Incluye el Botón de Seguridad Mejorado de Brownells y las demás piezas del sistema de seguridad que se desgastan, se dañan o se pierden. Reemplaza todo al mismo tiempo para asegurar un funcionamiento suave, positivo y fiable de este componente crítico. El tornillo del botón de seguridad también se vende por separado, así que no necesitas comprar un kit nuevo completo si el tornillo se daña durante la instalación.

79.9 EUR 0 79,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Hacer: Mossberg Modelo: 500

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

El kit incluye un botón de seguridad mejorado, tornillo del botón, placa de retén, bola de retén, resorte de retén e instrucciones de instalación.
Compatible con escopetas Mossberg 500/590/835/930/935.
El tornillo del botón de seguridad también se vende por separado, permitiendo reemplazos sin necesidad de comprar un kit completo nuevo.

Atributos

Hacer: Mossberg Modelo: 500 Peso de entrega: 0,068kg Altura de envío: 5mm Ancho de envío: 84mm Longitud de envío: 157mm UPC : 050806109216

Detalles del artículo

Hecho en USA

Mejora la seguridad de tu escopeta con el kit de seguridad MOSSBERG de Brownells. 🔒 Incluye todo lo necesario para un funcionamiento fiable.

Shaped For Easy, No-Slip Operation; Made From Hardened Steel To Last

SPECS: Kit includes enhanced safety button, button screw, detent plate, detent ball, detent spring, and installation instructions. Fits Mossberg 500/590/835/930/935 shotguns.

Más...

Diseñado para una Operación Fácil y Antideslizante; Hecho de Acero Endurecido para Durar

Más...