Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

DAYTON TRAISTER
MARK II TRIGGER

240100096

Custom Triggers For Military Rifles

Lightweight, all steel triggers with rolling sear block design provide single-stage pull for military rifles.

SPECS: Mark II Trigger: Adjusts for overtravel and pull (2 to 7 lbs.). 3⁄16" wide serrated trigger. Blued steel housing and trigger, hardened internals. Wt. 2 oz. EW-5 fits 1917 Enfield w/5-round magazine plus 1914 .303 Enfield, Rem. Mod 30 and 30S. EW-6 fits same as EW-5 but w/6-round magazine. UM fits Mauser 98 and commercial actions. GM fits Swedish and other Mauser 93 thru 96's; US fits 03 and 03A3 Springfield.

Más...

Gatillos Personalizados Para Rifles Militares

Gatillos ligeros, todos de acero con diseño de bloque de sear rodante que proporcionan un disparo de una sola etapa para rifles militares.

ESPECIFICACIONES: Mark II Trigger: Ajustable en recorrido y peso de disparo (de 2 a 7 lbs.). Gatillo serrado de 3⁄16" de ancho. Caja de acero azulado y gatillo, componentes internos endurecidos. Peso 2 oz. EW-5 es compatible con Enfield 1917 con cargador de 5 balas y Enfield 1914 .303, Rem. Mod 30 y 30S. EW-6 es compatible con los mismos modelos que el EW-5 pero con cargador de 6 balas. UM es para Mauser 98 y acciones comerciales. GM es para Mauser suecos y otros modelos del 93 al 96; US es para Springfield 03 y 03A3.

Más...

Evaluaciones de clientes para DAYTON TRAISTER MARK II TRIGGER GM

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 4,9

I would buy this product again (22/07/2010)

I have found that this product works beter with soft Russian primers as miss-fires can occur with some hard primers.
This is obviously due to the shorter striker fall/travel.
A great product and recommended for its ease of fitting and use.

speedy (22/07/2011)

I have two, and need one more. Light gunsmithing required. It does increase the bolt lift weight, but that is the trade off for coc on open w/ speedlock. I gave it five stars because it excels at everything it is supposed to do.

Excellent kit .org (17/08/2017)

Have used this conversion on three 17s to date this order is to do 3 14s and 1 17.Easy to install with excellent trigger will go down to 1.75 with ease. Watch the trigger frame when first installed for proper clearance.

"I would buy this 7 days a week" (14/05/2011)

Instalation within seconds on the action/reciever; you will though have to make room in the stock if you are use the Miltray stock.

THE BEST (19/04/2012)

Anyone with a 98 conversion should use this trigger. Simple, straightforward, and absolutely easy to install. In a vz-24 nothing could be better for a sporter conversion

Better than I thought it would be (10/02/2014)

I put this trigger on a Czech Brno mauser 98.It fit perfectly and didn't need any modification. I was able to eliminate creep and set the pull to a very low setting. I would estimate it to be around 1 lb. I am very surprised this trigger came out this well on this old mauser. This trigger is actually better after I adjusted it than the factory triggers on my modern rifles. I also bought and installed a Bold's on another mauser and I can't seem to get it as good as this one. I have bought a second Dayton Traister for another mauser 98 I am building.

1st Class Trigger (19/02/2016)

Used this trigger in a custom VZ-24 with a rebarreled with a new 8x57 barrel in a McMillan. Easiest Mauser trigger I've ever installed. Adjustments are easy and trigger breaks very clean and at consistent pull weight. I'd rank this trigger right up there with Timney for feel and function, also really like the steel construction.

Very satisfied (16/03/2017)

Installed on a Yugo 24/47 with military stock and used a dremel to remove minor excess wood inside the stock for trigger clearance.

Fits perfect.

Yugo M48 installation (29/05/2018)

Great trigger once installed. Easy install on the receiver but the stock required inleting. Took about 1.5 hours of carefully removing elm stock material behind the original inlet. About 3/8 wide and as deep cut out back to 3/8" of rear receiver pillar. When first installed, I did not take enough material out and the bolt would bind on cocking when the receiver screws were tightened. Removed more material with the dremel. Trigger guard was fine but I opened the trigger hole slightly. Good pull with a hint of two stage, very crisp break. Well worth the effort.

Love it. (25/07/2017)

I chose the D-T over Timney because the Timney buckles up tight against the receiver and is hard to push the bolt over the sear. The D-T uses the spring as found in original Swedes so bolt slides over the sear smoothly, and flexes just like the original. Trigger is crisp.

I wish they made this trigger with a safety like the Timney.

Leer 10 mas calificaciones en brownells.com

94.9 99.9 2 EUR

N.º de producto: 240100096
DAYTON TRAISTER MARK II TRIGGER GM
Ref Fabricante: DMT96 Gatillos ligeros, todos de acero con diseño de bloque de sear rodante que proporcionan un disparo de una sola etapa para rifles militares.

99.9 EUR 0 99,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Estilo: Ajustable Hacer: Mauser Modelo: 96

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Atributos

Estilo: Ajustable Hacer: Mauser Modelo: 96 Peso de entrega: 0,054kg Altura de envío: 10mm Ancho de envío: 74mm Longitud de envío: 150mm

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.c

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

N.º de producto: 240100098
DAYTON TRAISTER MARK II TRIGGER UM
Ref Fabricante: DMT98 Gatillos ligeros, todos de acero con diseño de bloque de sear rodante que proporcionan un disparo de una sola etapa para rifles militares.

94.9 EUR 0 94,90 € *

Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.

Caracteristicas: Estilo: Ajustable Hacer: Mauser Modelo: 98

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Mejora tu rifle con el Gatillo MARK II de Dayton Traister. 🎯 Ajustable y ligero, ideal para un disparo preciso en rifles militares.

Custom Triggers For Military Rifles

Lightweight, all steel triggers with rolling sear block design provide single-stage pull for military rifles.

Más...

Gatillos Personalizados Para Rifles Militares

Gatillos ligeros, todos de acero con diseño de bloque de sear rodante que proporcionan un disparo de una sola etapa para rifles militares.

Más...

Evaluaciones de clientes para DAYTON TRAISTER MARK II TRIGGER GM

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 4,9

I would buy this product again (22/07/2010)

speedy (22/07/2011)

Excellent kit .org (17/08/2017)

"I would buy this 7 days a week" (14/05/2011)

Instalation within seconds on the action/reciever; you will though have to make room in the stock if you are use the Miltray stock.

THE BEST (19/04/2012)

Anyone with a 98 conversion should use this trigger. Simple, straightforward, and absolutely easy to install. In a vz-24 nothing could be better for a sporter conversion

Better than I thought it would be (10/02/2014)

1st Class Trigger (19/02/2016)

Very satisfied (16/03/2017)

Installed on a Yugo 24/47 with military stock and used a dremel to remove minor excess wood inside the stock for trigger clearance.

Fits perfect.

Yugo M48 installation (29/05/2018)

Love it. (25/07/2017)

Leer 10 mas calificaciones en brownells.com

DAYTON TRAISTER
MARK II TRIGGER

Evaluaciones de clientes para DAYTON TRAISTER MARK II TRIGGER GM

Atributos

Detalles del artículo

Operador económico responsable según el reglamento de la UE

Evaluaciones de clientes para DAYTON TRAISTER MARK II TRIGGER GM

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.