Más de 300,000 clientes - ¡les damos las gracias!

40,000+ productos para caza y deportes de tiro

APEX TACTICAL SPECIALTIES INC
M&P RED FLAT FACE FORWARD SET TRIGGER

856008005529 100017344
The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

284.9 284.9 1 EUR
N.º de producto: 100017344
APEX TACTICAL SPECIALTIES INC RED FLAT FACED FORWARD SET SEAR & TRIGGER KIT M&P
Ref Fabricante: 100-055 856008005529 El nuevo gatillo Flat Faced Forward Set ofrece una sensación y rendimiento de un gatillo tipo 1911 de fábrica con un peso aproximado de 3.0 a 4.0 lbs. Diseñado para funcionar en cualquier pistola modelo Smith & Wesson M&P de calibre central (excluyendo Shield), el Kit de Gatillo Apex Flat Faced Forward Set reduce la pre-travel y la sobre-travel del gatillo, permitiendo al tirador posicionar su dedo en un punto de apalancamiento más bajo en la cara del gatillo para aprovechar pesos de gatillo más bajos. El gatillo Flat Faced Forward Set por sí solo está diseñado para trabajar con tu kit existente de Apex Forward Set Sear y no funcionará con las piezas de control de fuego de fábrica de Smith & Wesson. Incluido en el kit completo están el Apex Forward Set Sear que acorta el recorrido del gatillo al soltar el percutor en un punto más adelante que el fiador de fábrica. El Ultimate Striker Block produce una tracción del gatillo más suave y elimina la mayoría de los problemas de falso reseteo a través de un radio mejorado en la cara del bloque del percutor. El kit de muelles Forward Set Springs produce una tracción del gatillo de 3.0 a 4.0 lbs, dependiendo de qué muelle de retorno del gatillo se instale. Requiere el uso del bloque de alojamiento del fiador diseñado para el émbolo de fiador de tamaño grande y resorte (producción actual a partir de junio de 2011) NO se recomienda para aplicaciones de servicio/portación. No es compatible con las pistolas M&P 2.0
284.9 EUR 3 284,90 € *
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas: Acabado: Red Estilo: Competition, Enhanced Hacer: Smith & Wesson Modelo: M&P

Top takeaways

  1. El gatillo Flat Faced Forward Set ofrece una sensación similar a un gatillo 1911 con un peso de 3.0 a 4.0 lbs y reduce el pre-travel y sobre-travel.
  2. Compatible con pistolas Smith & Wesson M&P de calibre central, excluyendo la Shield y las M&P 2.0.
  3. Incluye el Apex Forward Set Sear y el Ultimate Striker Block para una tracción más suave y un reseteo más fiable.

Atributos

Acabado: Red Estilo: Enhanced,Competition Hacer: Smith & Wesson Modelo: M&P Peso de entrega: 0,005kg Altura de envío: 20mm Ancho de envío: 79mm Longitud de envío: 89mm UPC : 856008005529

Detalles del artículo

Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.c

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es





Mejora tu M&P con el gatillo Flat Faced Forward Set de Apex Tactical. 🎯 Reduce el recorrido y mejora el rendimiento de tu tiro.

The new Flat Faced Forward Set Trigger delivers a feel and performance of a factory 1911 type trigger at an approximate weight of 3.0 to 4.0 lbs.  Designed to work in any Smith & Wesson M&P model pistol in a centerfire caliber(excluding Shield), the Apex Flat Faced Forward Set Trigger Kit reduces trigger pre-travel and over-travel, while allowing the shooter to position their finger at an increased leverage point lower on the trigger face to take advantage of lower trigger pull weights. The Flat Faced Forward Set Trigger by itself is designed to work with your existing Apex Forward Set Sear kit and will not work with the factory Smith & Wesson fire control parts. Included in the full kit are the Apex Forward Set Sear which shortens the stroke of the trigger by dropping the striker at a point farther forward than the factory sear.  The Ultimate Striker Block produces a smoother trigger pull and eliminates most false reset issues through an improved radius on the striker block face.  The Forward Set Springs kit produces a trigger pull of 3.0 to 4.0 lbs, depending on which trigger return spring is insalled.  Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011)  NOT recommended for duty/carry applications. Does Not fit M&P 2.0 Pistols  

SPECS: Works with all S&W M&P pistols in all center fire calibers and configurations equipped with an Apex Forward Set Sear (excludes the Shield pistol).

Requires the use of the sear housing block designed for the large size sear plunger and spring(current production as of June, 2011).

Does Not fit M&P 2.0 Pistols


 

Volver arriba