Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

BROWNELLS
REMINGTON 700 HEAVY DUTY PICATINNY BASE

050806006652 080000761

Cross-Slot System Provides Solid, Versatile Mounting On Tactical & Sporting Rifles

Same one-piece, machined aluminum design as our standard Picatinny scope bases, with oversized, 8-40 tpi mounting screws for greater gripping force that’s ideal for heavy, long-range scopes. Requires drilling out and tapping factory receiver holes to accept the larger screws.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Includes four steel, 8-40 tpi Torx mounting screws. Requires drilling and tapping of receiver to accept 8-40 tpi screws. Fits Remington 700 long action (LA).

Más...

El Sistema de Ranura Cruzada Ofrece un Montaje Sólido y Versátil en Rifles Tácticos y Deportivos

El mismo diseño de aluminio mecanizado de una pieza que nuestras bases estándar Picatinny para visores, con tornillos de montaje sobredimensionados de 8-40 tpi para una mayor fuerza de agarre, ideal para visores de largo alcance pesados. Requiere perforar y roscar los agujeros del receptor de fábrica para aceptar los tornillos más grandes.

ESPECIFICACIONES: Aluminio 6061 T6, anodizado duro, negro mate. Incluye cuatro tornillos de acero para montaje Torx de 8-40 tpi. Requiere perforar y roscar el receptor para aceptar tornillos de 8-40 tpi. Compatible con la acción larga (LA) de Remington 700.

Más...

Evaluaciones de clientes para BROWNELLS REMINGTON 700 SA 20 MOA PICATINNY BASE

Número de evaluaciones: 5
De brownells.com: 5
Evaluación media: 3,6

Nice mount ...BUT! (10/08/2012)

Really nice mount for the price, but the screws they provided were ridiculously SHORT and only extended HALF way into the receiver..I bought this knowing the existing 6-48 receiver screw holes needed to be drilled and re-tapped to stronger 8-40 (supposedly provided) which is what I do any way to all my receivers before mounting bases any way but was disappointed to find the 8-40 screws provided where way too short for any adequate holding strength..I usually have extras but not this time and 8-40 screws are not exactly laying around or obtainable at the hardware so had to order more of proper length and that sucked...Otherwise great mount for the price...

Good Value Base (22/06/2015)

Base is very well made but a bit higher than it needs to be so unless you have an adjustable height cheekpiece on your stock, you need to raise your head up more to properly see through the scope. I have this model base for both my long and short action Remington 700 rifles and it was easy to drill out and tap the receiver to take the larger 8-40 screws included with these bases. Depending on the scope mounted, one may need to shorten the front of the base to clear the objective bell as it extends about 1 1/2" beyond the receiver. Since the base is made of aluminum, cold blue cannot be used to touch it up so paint is needed. An added benefit of using a picatinny type rail base instead of standard scope bases is that one can easily mount things like night vision devices on the rail. A steel version would be nice.

Bombproof (03/11/2016)

Bought this to put on my M40 custom build. Heavy duty and bombproof. I told my smith I wanted to build a M40 based sniper rifle that I could drive tent pegs with and take a cold bore shot at 1000yds and get the hit. This scope base helped me accomplish that goal.

Not Pleased (06/03/2015)

This rail is labeled as standard but seems extremely high to me. Didn't work for my rifle / optic combination at all. Ended up being a waste of $40.

Four stars overall, but one caveat. (03/11/2016)

I installed this on my son's Rem 700 LA. I had opened the mounting holes to 8-40 on a mill. the new base aligned PERFECTLY with the new holes. The finish is a flat black matte on an aluminum body. Light weight precision machined. NOW why only four stars? The screws that it comes with do not fit the rear two holes, only the front, I had to swap in two longer 8-40 screws I had on hand. If Brownell's could please include the correct length screws this mount would be five stars!

Leer 5 mas calificaciones en brownells.com

64.9 99.9 2 EUR

N.º de producto: 080000761
BROWNELLS REMINGTON 700 SA 20 MOA PICATINNY BASE 050806006652 El mismo diseño de aluminio mecanizado de una pieza que nuestras bases estándar Picatinny para visores, con tornillos de montaje sobredimensionados de 8-40 tpi para una mayor fuerza de agarre, ideal para visores de largo alcance pesados. Requiere perforar y roscar los agujeros del receptor de fábrica para aceptar los tornillos más grandes.

99.9 EUR 12 99,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Matte Black Elevation: 20 MOA Estilo: Picatinny Hacer: Remington Material: Aluminio Modelo: 700 Numero de bases: 1-Piece Tipo de accion: Short

Añadir a la lista de favoritos.

Preguntas

Detalles

Añadir a la lista de favoritos.

Preguntas

Top takeaways

Base Picatinny de una pieza en aluminio 6061 T6, anodizado duro negro mate, ideal para visores de largo alcance pesados.
Incluye cuatro tornillos de acero Torx de 8-40 tpi, requiere perforar y roscar el receptor de fábrica para aceptar tornillos más grandes.
Compatible con la acción corta (Short Action) del Remington 700, ofrece una elevación de 20 MOA.

Atributos

Color: Matte Black Elevation: 20 MOA Estilo: Picatinny Hacer: Remington Material: Aluminio Modelo: 700 Numero de bases: 1-Piece Tipo de Acción: Short Peso de entrega: 0,091kg Altura de envío: 64mm Ancho de envío: 64mm Longitud de envío: 229mm UPC : 050806006652

Detalles del artículo

Hecho en USA

Operador económico responsable según el reglamento de la UE

Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es

N.º de producto: 080000759
BROWNELLS REMINGTON 700 SA 0 MOA PICATINNY BASE 8-40 SCREWS 050806109810 El mismo diseño de aluminio mecanizado de una pieza que nuestras bases estándar Picatinny para visores, con tornillos de montaje sobredimensionados de 8-40 tpi para una mayor fuerza de agarre, ideal para visores de largo alcance pesados. Requiere perforar y roscar los agujeros del receptor de fábrica para aceptar los tornillos más grandes.

64.9 EUR 2 64,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Color: Matte Black Elevation: 0 MOA Estilo: Picatinny Hacer: Remington Material: Aluminio Modelo: 700 Numero de bases: 1-Piece Tipo de accion: Short

Añadir a la lista de favoritos.

Preguntas