Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. Unique cap design includes both ratchet and ball/spring type detent systems for no-hassle installation. Includes a ¾" long, wood screw swivel stud for the buttstock. Sling loops not included. Installation requires drilling of buttstock.
SPECS: Steel, black, matte finish. Includes magazine cap with swivel stud, wood screw stud w/black spacer, and instructions. Models available for Remington 870/1100/11-87/11-96, 12 ga. only and Mossberg 500 and Maverick 88, 20 ga. & 12 ga. Moss/Mav includes spanner wrench.
Más...
Se instala fácilmente para una colocación instantánea de la correa
Tapa de cargador de acero mecanizado con un pivote giratorio incorporado de 360° que facilita la conversión de tu escopeta Remington para añadir una correa portafusil. El diseño único de la tapa incluye sistemas de retención tanto de trinquete como de bola/muelle para una instalación sin complicaciones. Incluye un pivote giratorio de tornillo para madera de ¾" de largo para la culata. Las anillas para la correa no están incluidas. La instalación requiere perforación de la culata.
ESPECIFICACIONES: Acero, negro, acabado mate. Incluye tapa de cargador con pivote giratorio, pivote de tornillo para madera con espaciador negro e instrucciones. Modelos disponibles para Remington 870/1100/11-87/11-96, solo calibre 12 y Mossberg 500 y Maverick 88, calibres 20 y 12. Moss/Mav incluye llave de gancho.
Más...
Evaluaciones de clientes para OUTDOOR CONNECTION REM MAGAZINE CAP W/SWIVEL BASE
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 3
This is how Mossberg should've done it.(22/01/2016)
Stud truly rotates in take-down screw, big improvement over OEM. Works on 20 gauge guns as well. Installation is easy and takes 2 minutes with the included tool.
Perfect solution for Maverick 88(29/03/2018)
For a Maverick 88, this Outdoor Connection brand is the way to go. I tried Uncle Mike's 1531-2 parts, but the tiny screw does NOT stay in the takedown bolt, even with superglue, and even if it did, it would be hard to line it up evenly, as it is meant to stay in a static position and not spin 360 degrees. The Outdoor Connection brand however, is perfect. The replacement takedown bolt with integrated swivel stud fits perfectly and easily onto my Maverick 88. The silver cylinder included in the pack is a very handy tool for unscrewing the factory slotted retainer ring (no retainer ring included in this pack, just re-use the one your shotgun already has). Highly recommended if you want to put a sling on your Maverick 88. And unlike the Uncle Mike's 1531-2, this one DOES allow your sling 360 degrees of free rotation where it attaches to the magazine tube. Shipping was faster than expected (ordered on a Sunday, arrived 4 days later on Thursday even after choosing the cheapest, slowest shipping option), THANKS BROWNELLS & OUTDOOR CONNECTION!!
Won't screw down!(17/10/2015)
It doesn't fit!
The magazine cap wouldn't screw on. Yeah(16/02/2017)
The magazine cap wouldn't screw on my gun. Hard to believe isn't it?
I kept tying to get it to go on, but the cap had defective threads. Two other 870 magazine caps that I had screwed on to this gun just fine. But the cap that came with the swivel kit from Outdoor Connection would not go one at all.
I was worried that this defective magazine cap would ruin the threads on the magazine tube of my gun, so I tossed it.
Save yourself a lot of time and trouble, DON'T BUY THIS.
N.º de producto: 683000006 OUTDOOR CONNECTION REM MAGAZINE CAP W/SWIVEL BASE Ref Fabricante: TSC-79523051057795234 Tapa de cargador de acero mecanizado con un pivote giratorio incorporado de 360° que facilita la conversión de tu escopeta Remington para añadir una correa portafusil. El diseño único de la tapa incluye sistemas de retención tanto de trinquete como de bola/muelle para una instalación sin complicaciones. Incluye un pivote giratorio de tornillo para madera de ¾" de largo para la culata. Las anillas para la correa no están incluidas. La instalación requiere perforación de la culata.
Tapa de cargador de acero con pivote giratorio de 360° para añadir una correa portafusil a escopetas Remington.
Incluye sistemas de retención de trinquete y bola/muelle para una instalación sencilla, y un pivote giratorio de tornillo para madera de ¾".
Modelos disponibles para Remington 870/1100/11-87/11-96 (calibre 12) y Mossberg 500 y Maverick 88 (calibres 20 y 12).
Atributos
Estilo:
Shotgun Swivel
Hacer:
Remington
Material:
Steel
Modelo:
11-87,1100,870
Peso de entrega: 0,068kgAltura de envío: 8mmAncho de envío: 94mmLongitud de envío: 127mm
UPC
: 051057795234
Detalles del artículo
Hecho en USA
N.º de producto: 683000015 OUTDOOR CONNECTION MOSS/MAV MAGAZINE CAP W/SWIVEL BASE Ref Fabricante: TSC-79544051057795449 Tapa de cargador de acero mecanizado con un pivote giratorio incorporado de 360° que facilita la conversión de tu escopeta Remington para añadir una correa portafusil. El diseño único de la tapa incluye sistemas de retención tanto de trinquete como de bola/muelle para una instalación sin complicaciones. Incluye un pivote giratorio de tornillo para madera de ¾" de largo para la culata. Las anillas para la correa no están incluidas. La instalación requiere perforación de la culata.
Machined steel magazine cap with built-in, 360° rotating swivel stud makes it easy to convert your Remington shotgun to accept a carry sling. Unique cap design includes both ratchet and ball/spring type detent systems for no-hassle installation. Includes a ¾" long, wood screw swivel stud for the buttstock. Sling loops not included. Installation requires drilling of buttstock.
SPECS: Steel, black, matte finish. Includes magazine cap with swivel stud, wood screw stud w/black spacer, and instructions. Models available for Remington 870/1100/11-87/11-96, 12 ga. only and Mossberg 500 and Maverick 88, 20 ga. & 12 ga. Moss/Mav includes spanner wrench.
Más...
Se instala fácilmente para una colocación instantánea de la correa
Tapa de cargador de acero mecanizado con un pivote giratorio incorporado de 360° que facilita la conversión de tu escopeta Remington para añadir una correa portafusil. El diseño único de la tapa incluye sistemas de retención tanto de trinquete como de bola/muelle para una instalación sin complicaciones. Incluye un pivote giratorio de tornillo para madera de ¾" de largo para la culata. Las anillas para la correa no están incluidas. La instalación requiere perforación de la culata.
ESPECIFICACIONES: Acero, negro, acabado mate. Incluye tapa de cargador con pivote giratorio, pivote de tornillo para madera con espaciador negro e instrucciones. Modelos disponibles para Remington 870/1100/11-87/11-96, solo calibre 12 y Mossberg 500 y Maverick 88, calibres 20 y 12. Moss/Mav incluye llave de gancho.
Más...
Evaluaciones de clientes para OUTDOOR CONNECTION REM MAGAZINE CAP W/SWIVEL BASE
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 3
This is how Mossberg should've done it.(22/01/2016)
Stud truly rotates in take-down screw, big improvement over OEM. Works on 20 gauge guns as well. Installation is easy and takes 2 minutes with the included tool.
Perfect solution for Maverick 88(29/03/2018)
For a Maverick 88, this Outdoor Connection brand is the way to go. I tried Uncle Mike's 1531-2 parts, but the tiny screw does NOT stay in the takedown bolt, even with superglue, and even if it did, it would be hard to line it up evenly, as it is meant to stay in a static position and not spin 360 degrees. The Outdoor Connection brand however, is perfect. The replacement takedown bolt with integrated swivel stud fits perfectly and easily onto my Maverick 88. The silver cylinder included in the pack is a very handy tool for unscrewing the factory slotted retainer ring (no retainer ring included in this pack, just re-use the one your shotgun already has). Highly recommended if you want to put a sling on your Maverick 88. And unlike the Uncle Mike's 1531-2, this one DOES allow your sling 360 degrees of free rotation where it attaches to the magazine tube. Shipping was faster than expected (ordered on a Sunday, arrived 4 days later on Thursday even after choosing the cheapest, slowest shipping option), THANKS BROWNELLS & OUTDOOR CONNECTION!!
Won't screw down!(17/10/2015)
It doesn't fit!
The magazine cap wouldn't screw on. Yeah(16/02/2017)
The magazine cap wouldn't screw on my gun. Hard to believe isn't it?
I kept tying to get it to go on, but the cap had defective threads. Two other 870 magazine caps that I had screwed on to this gun just fine. But the cap that came with the swivel kit from Outdoor Connection would not go one at all.
I was worried that this defective magazine cap would ruin the threads on the magazine tube of my gun, so I tossed it.
Save yourself a lot of time and trouble, DON'T BUY THIS.