Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Más...
Reduce el Tirón del Gatillo, Mejora la Precisión
Tres resortes de potencia reducida para ajustar y suavizar la sensación del tirón del gatillo. Compatible con los modelos más recientes de P220, P226 y P229 que utilizan un resorte principal corto con una base de plástico para el resorte del martillo. Incluye 1 resorte de potencia reducida de 17, 18 y 19 lb. El resorte de fábrica del P220 es de 22 lb. El resorte de fábrica del P226 y P229 es de 24 lb.
Más...
Evaluaciones de clientes para WOLFF SIG MAINSPRING KIT #32356
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,5
Wolff Sig Mainspring(11/07/2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23/03/2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(06/05/2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21/05/2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.
N.º de producto: 969000021 WOLFF SIG MAINSPRING KIT #32356 Ref Fabricante: 32356 Tres resortes de potencia reducida para ajustar y suavizar la sensación del tirón del gatillo. Compatible con los modelos más recientes de P220, P226 y P229 que utilizan un resorte principal corto con una base de plástico para el resorte del martillo. Incluye 1 resorte de potencia reducida de 17, 18 y 19 lb. El resorte de fábrica del P220 es de 22 lb. El resorte de fábrica del P226 y P229 es de 24 lb.
Three, reduced power springs for tuning and smoothing felt trigger pull. Fits the newer P220, P226 and P229's that use a short mainspring with a plastic, hammer spring base insert. Contains 1 each of 17, 18, and 19 lb., reduced power, mainsprings. P220 factory spring is 22 lb. P226 and P229 factory spring is 24 lb.
Más...
Reduce el Tirón del Gatillo, Mejora la Precisión
Tres resortes de potencia reducida para ajustar y suavizar la sensación del tirón del gatillo. Compatible con los modelos más recientes de P220, P226 y P229 que utilizan un resorte principal corto con una base de plástico para el resorte del martillo. Incluye 1 resorte de potencia reducida de 17, 18 y 19 lb. El resorte de fábrica del P220 es de 22 lb. El resorte de fábrica del P226 y P229 es de 24 lb.
Más...
Evaluaciones de clientes para WOLFF SIG MAINSPRING KIT #32356
Número de evaluaciones: 4
De brownells.com: 4
Evaluación media: 4,5
Wolff Sig Mainspring(11/07/2009)
Been using these to custom tune triggers on 226 9mm's for several years. As a stand alone part and replacement, it is ok but far from perfect. It does make for a slightly smoother pull, but is best used in conjunction with some polishing work, and Wolff Firing Pin Springs in order to custom tune the firing pin inertia and give you a reliable impact on the primer. If you don't, you may find some FTF/Light Strikes on hard primers found in a lot of Military/Surplus ammunition.
Easy to use for the garage gunsmith to give a slightly better pull, best used by a legitimate gunsmith for a truly significant improvement.
Works as advertised(23/03/2010)
I have been working on Sig pistols for over 10 years and have used these reduced power springs to improve trigger pulls for some time now and never had a single problem. They work as intended/adverised.
WOLFF SIG MAINSPRING KIT(06/05/2012)
This kit provides you with the proper spring for your special needs and all will reduce the trigger pull in DA and SA. A lot of parts polishing will make it smooth and the spring does the rest. I have always been able to get 100% ignition with the 17lbs spring but recommend a little heavier for a duty or self defense gun.
Works great(21/05/2017)
These reduced power mainsprings do as described. I'm currently using the 18lb spring as I had light primer strikes on CCI primers with the 17lb one. Next time I disassemble my slide, I'll replaced the factory firing pin spring with a reduced power one and retry the 17lb spring.
DA is down to approx 9lbs and SA is a crisp 3.5lbs.