Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Material: Aluminio 7075 Recubrimiento: Mate Negro Duro Longitud Total: 1.831" Ancho Total: 1.062" Hardware de Montaje: (2) Tornillos de Cabeza Redonda 8-32, (1) Tornillo de Ajuste 8-32) Compatibilidad con Punto Rojo: Vortex Razor, C-More RTS & STS Simplemente quita la mira trasera de tu arma y reemplázala con nuestro soporte para montar tu punto rojo Vortex Razor, C-More RTS o STS. No se requieren alteraciones. Puedes quitar nuestro soporte y volver a colocar tu mira trasera en cualquier momento. Hardware de montaje incluido. Instrucciones de Instalación Quita la mira trasera* Instala el Soporte de Mira EGW en el riel de dovetail Aprieta el tornillo de ajuste (si es aplicable) Coloca el punto rojo en el Soporte de Mira EGW (colocar un pequeño trozo de papel entre el punto rojo y el soporte de mira facilitará la extracción y mantendrá el Loctite alejado del punto rojo.) Aplica Loctite azul a los tornillos de montaje proporcionados Aprieta los tornillos de montaje a 15in/lbs