One of the problems with a defensive shotgun has always been its limited capacity. Luckily, a solution is available with the new Lyman Slimline Sidesaddle Shellholder, designed to hold six extra shells in a sleek, contoured design. The Lyman Slimline Sidesaddle Shellholder is constructed using a backing plate made from anodized aluminum that mounts a shotgun-shell saddle made of rubberized polymer to the side of the receiver. Fits Mossberg 500 shotguns Mounting plate is contoured to minimize receiver footprint Fits 12-gauge shells only The construction of the Lyman Slimline Sidesaddle Shellholder is designed to provide tough resistance to wear and weather conditions, ensuring a long service life.
Más...
Uno de los problemas con una escopeta defensiva siempre ha sido su capacidad limitada. Afortunadamente, hay una solución disponible con el nuevo Lyman Slimline Sidesaddle Shellholder de Tacstar, diseñado para sostener seis cartuchos adicionales en un diseño elegante y contorneado. El Lyman Slimline Sidesaddle Shellholder está construido con una placa base de aluminio anodizado que monta una funda para cartuchos de polímero cauchutado al lado del receptor. Es compatible con las escopetas Mossberg 500. La placa de montaje está contorneada para minimizar la huella en el receptor. Solo es apto para cartuchos de calibre 12. La construcción del Lyman Slimline Sidesaddle Shellholder está diseñada para ofrecer una resistencia sólida al desgaste y a las condiciones climáticas, asegurando una larga vida útil.
Más...
Evaluaciones de clientes para TACSTAR MOSSBERG 500, 590, MAVERICK 88 SHELLHOLDER
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,3
It's okay, but...(18/04/2018)
I got this expecting it to fit my Mossberg 500. It installed fine, but the thing is too long. The pump won't slide back completely preventing shells to be fed into the chamber. Since I dont want to cut my pump slide shorter, I ended up putting it on upside down. Now that it's out of the way of the pump, it's now making the grip slightly awkward. Don't make my mistake in assuming that it will fit what it says it will and find something better.
Overall i would rate 3.5 stars out of 5. I have experience with both models Tacstar side saddles and wanted something more slimline and i thought this was perfect. Mounted fine and is holding up. However my one problem is that when i got it, it was monkey tight. The side saddle was ridiculously hard to get shells out of, on advice of a video i saw i double wrapped the 12 gauge shells in a plastic bag and inserted into the side saddle, after a few days it loosen up okay, but it has variance in the amount of force to pull shells out now. Like the middle is tougher to pulls shells out of compared to the ones on the ends. I'm sure i could tinker with it but If it didn't have this problem it would be a 5 star product.
Awesome accesoory(06/12/2017)
Great item, saw it on a coworker's 870. It's very Mesa Tactical-esque without the price. The rubberized loops are nice, very tight with some shells though. Overall, a really great product and addition to my 870!
N.º de producto: 867000050 TACSTAR MOSSBERG 500, 590, MAVERICK 88 SHELLHOLDER Ref Fabricante: 1081210751103012109 Uno de los problemas con una escopeta defensiva siempre ha sido su capacidad limitada. Afortunadamente, hay una solución disponible con el nuevo Lyman Slimline Sidesaddle Shellholder de Tacstar, diseñado para sostener seis cartuchos adicionales en un diseño elegante y contorneado. El Lyman Slimline Sidesaddle Shellholder está construido con una placa base de aluminio anodizado que monta una funda para cartuchos de polímero cauchutado al lado del receptor. Es compatible con las escopetas Mossberg 500. La placa de montaje está contorneada para minimizar la huella en el receptor. Solo es apto para cartuchos de calibre 12. La construcción del Lyman Slimline Sidesaddle Shellholder está diseñada para ofrecer una resistencia sólida al desgaste y a las condiciones climáticas, asegurando una larga vida útil.
74.9EUR074,90 €
*
No disponible.
Caracteristicas:Calibre: 12 GaugeCapacidad: 6-RoundEstilo: Range Loader
El Lyman Slimline Sidesaddle Shellholder de Tacstar sostiene seis cartuchos adicionales en un diseño elegante y contorneado.
Compatible con escopetas Mossberg 500, 590 y Maverick 88, y solo apto para cartuchos de calibre 12.
Construido con una placa base de aluminio anodizado y una funda de polímero cauchutado, ofrece resistencia al desgaste y a las condiciones climáticas.
Atributos
Calibre:
12 Gauge
Capacidad:
6-Round
Estilo:
Range Loader
Peso de entrega: 0,227kgAltura de envío: 38mmAncho de envío: 203mmLongitud de envío: 191mm
UPC
: 751103012109
Detalles del artículo
Hecho en USA
N.º de producto: 867000051 TACSTAR REMINGTON 870, 1100, 1187 SHELLHOLDER Ref Fabricante: 1081211751103012116 Uno de los problemas con una escopeta defensiva siempre ha sido su capacidad limitada. Afortunadamente, hay una solución disponible con el nuevo Lyman Slimline Sidesaddle Shellholder de Tacstar, diseñado para sostener seis cartuchos adicionales en un diseño elegante y contorneado. El Lyman Slimline Sidesaddle Shellholder está construido con una placa base de aluminio anodizado que monta una funda para cartuchos de polímero cauchutado al lado del receptor. Es compatible con las escopetas Mossberg 500. La placa de montaje está contorneada para minimizar la huella en el receptor. Solo es apto para cartuchos de calibre 12. La construcción del Lyman Slimline Sidesaddle Shellholder está diseñada para ofrecer una resistencia sólida al desgaste y a las condiciones climáticas, asegurando una larga vida útil.
54.9EUR054,90 €
*
No disponible.
Caracteristicas:Calibre: 12 GaugeCapacidad: 6-RoundEstilo: Range Loader
One of the problems with a defensive shotgun has always been its limited capacity. Luckily, a solution is available with the new Lyman Slimline Sidesaddle Shellholder, designed to hold six extra shells in a sleek, contoured design. The Lyman Slimline Sidesaddle Shellholder is constructed using a backing plate made from anodized aluminum that mounts a shotgun-shell saddle made of rubberized polymer to the side of the receiver. Fits Mossberg 500 shotguns Mounting plate is contoured to minimize receiver footprint Fits 12-gauge shells only The construction of the Lyman Slimline Sidesaddle Shellholder is designed to provide tough resistance to wear and weather conditions, ensuring a long service life.
Más...
Uno de los problemas con una escopeta defensiva siempre ha sido su capacidad limitada. Afortunadamente, hay una solución disponible con el nuevo Lyman Slimline Sidesaddle Shellholder de Tacstar, diseñado para sostener seis cartuchos adicionales en un diseño elegante y contorneado. El Lyman Slimline Sidesaddle Shellholder está construido con una placa base de aluminio anodizado que monta una funda para cartuchos de polímero cauchutado al lado del receptor. Es compatible con las escopetas Mossberg 500. La placa de montaje está contorneada para minimizar la huella en el receptor. Solo es apto para cartuchos de calibre 12. La construcción del Lyman Slimline Sidesaddle Shellholder está diseñada para ofrecer una resistencia sólida al desgaste y a las condiciones climáticas, asegurando una larga vida útil.
Más...
Evaluaciones de clientes para TACSTAR MOSSBERG 500, 590, MAVERICK 88 SHELLHOLDER
Número de evaluaciones: 3
De brownells.com: 3
Evaluación media: 3,3
It's okay, but...(18/04/2018)
I got this expecting it to fit my Mossberg 500. It installed fine, but the thing is too long. The pump won't slide back completely preventing shells to be fed into the chamber. Since I dont want to cut my pump slide shorter, I ended up putting it on upside down. Now that it's out of the way of the pump, it's now making the grip slightly awkward. Don't make my mistake in assuming that it will fit what it says it will and find something better.
Overall i would rate 3.5 stars out of 5. I have experience with both models Tacstar side saddles and wanted something more slimline and i thought this was perfect. Mounted fine and is holding up. However my one problem is that when i got it, it was monkey tight. The side saddle was ridiculously hard to get shells out of, on advice of a video i saw i double wrapped the 12 gauge shells in a plastic bag and inserted into the side saddle, after a few days it loosen up okay, but it has variance in the amount of force to pull shells out now. Like the middle is tougher to pulls shells out of compared to the ones on the ends. I'm sure i could tinker with it but If it didn't have this problem it would be a 5 star product.
Awesome accesoory(06/12/2017)
Great item, saw it on a coworker's 870. It's very Mesa Tactical-esque without the price. The rubberized loops are nice, very tight with some shells though. Overall, a really great product and addition to my 870!