Su cesta está vacía.

Cesta

Ayuda y contacto

Envío gratuito a partir de 200 €

Política de devolución de 100 días

Newsletters

Oferta

Más de 300,000 clientes - ¡les damos las gracias!

4,93/5 "Muy bueno" (1400+ reseñas)

40,000+ productos para caza y deportes de tiro

BROWNELLS
STEEL PILOTS

050806018303 080686503

Centers Cutters For Accurate Work

Hardened steel pilot keeps Facing and Chamfering cutters properly centered in the bore. Resists wear for years of service.

Select one of the following for other rifle/handgun muzzles, cylinder facing & chamfering tools.

	Steel One Caliber Set		45° Cutter & Steel Pilot
	Brass One Caliber Set		45° Cutter & Brass Pilot
	90° Cutter & Steel Pilot		Chamfering & Facing Combo Sets
	90° Cutter & Brass Pilot		Brass Pilot Only

SPECS: Hardened steel. 1¼" (3.2cm) long. .45 ACP Pilots - .45 ACP-1 fits S&W model 25 & 625. .45 ACP-2 fits Colt 1917.

Más...

Centra los Cortadores para un Trabajo Preciso

El piloto de acero endurecido mantiene los cortadores de enfrentado y chaflanado correctamente centrados en el cañón. Resiste el desgaste por años de servicio.

Selecciona uno de los siguientes para otros cañones de rifle/pistola, herramientas para enfrentar cilindros y chaflanar.

	Set de un Calibre de Acero		Cortador de 45° & Steel Pilot
	Set de un Calibre de Latón		Cortador de 45° & Brass Pilot
	Cortador de 90° & Steel Pilot		Sets Combinados de Chaflanado y Enfrentado
	Cortador de 90° & Brass Pilot		Solo Brass Pilot

ESPECIFICACIONES: Acero endurecido. 1¼" (3.2cm) de largo. Pilotos .45 ACP - .45 ACP-1 se ajusta al modelo 25 & 625 de S&W. .45 ACP-2 se ajusta al Colt 1917.

Más...

Evaluaciones de clientes para BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE

Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 4,1

Too big for S&W 625 (15/09/2010)

Larger then the 45-1 and that needs to be fit to work with the 625 cylinder

Almost a perfict fit (15/09/2010)

This is the one for the S&W625, it must be turned down for a nice tight wobble free fit but will not wear out after that. Well machined and concentric.

Too small for S&W 610 (15/09/2010)

Very well made, concentric and smooth machining but too small to fit the S&W 610 10mm cylinder. Get the 41mag and turn it down for a perfect zero wobble fit.

Yes this works with Mosins (03/08/2013)

I ordered this pilot for use with an 11 degree muzzle crown tool for my Mosin Nagant rifles. The good, it fit perfect with no wobble. The bad this worked on only one of my rifles, the project gun I ordered it for had a bore diameter of less than .311. No problem I will just order the .30 caliber pilot. I could have ordered the .30 caliber size to begin with but I didn't want a loose fit or have to use a cloth patch to "make" it work.

It is a quality made tool and I can see it lasting a long time with proper care. Yes it works with some Mosins. if you have multiple rifles be prepared to order both of the pilots so you get a perfect fit.

Good quality product (13/11/2009)

The pilot has the look of good quality. The pilot fits the cutter and the muzzle real well.

This fits Mosin Nagant Rifles (10/08/2013)

Good quality pilot, no wobble when used in the proper size bore.

I had a tighter bore Mosin and this worked perfectly. I also ordered the .311 steel pilot to fit my Type 53 Mosin.

If you only plan on buying one pilot to work in all Mosins get this one. If your bore is a little bigger, use a cloth patch to make a tighter fit. This pilot will be loose in the more traditional .311 bore size.

Good quality product. (06/11/2009)

The pilot has the look of good quality. It fits the cutter real well. It also fits real well in the muzzel.

Good quality product. (06/11/2009)

The pilot has the look of qood quality. It fits the cutter real well. It also has a real good fit in the muzzel.

Good quality product. (08/11/2009)

The pilot has a look of good quality. It fits the cutter real well. It also has a good fit in the muzzel.

Good quality product (13/11/2009)

The pilot has the look of good quality. It also fits both the muzzle and cutter real well.

Leer 10 mas calificaciones en brownells.com

29.9 38.9 44 EUR

N.º de producto: 080686503
BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE 050806018303 El piloto de acero endurecido mantiene los cortadores de enfrentado y chaflanado correctamente centrados en el cañón. Resiste el desgaste por años de servicio.

32.9 EUR 1 32,90 € *

Plazo de entrega de aproximadamente 14-21 días.

Caracteristicas: Calibre: 50 Caliber (.500-.501) Material: Steel

BROWNELLS STEEL PILOTS

Evaluaciones de clientes para BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE

Atributos

Detalles del artículo

Operador económico responsable según el reglamento de la UE

Evaluaciones de clientes para BROWNELLS STEEL PILOT FOR .50 BMG/BP MUZZLE

Conéctese a

Métodos de pago seguros

Asociaciones profesionales

Bienvenido.

BROWNELLS
STEEL PILOTS