Extra-Long Rails For Factory Drilled & Tapped Barrels
Lightweight, extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each, individual shooter. Matches the recent, factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings.
SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate models for 7" Long or 5-1/2" Long Heavy barrel. Includes screws, instructions.
Más...
Rieles Extra Largos Para Cañones Perforados y Roscados de Fábrica
Riel para mira telescópica ligero y extra largo que proporciona suficiente longitud para que el alivio ocular pueda ser ajustado con precisión para cada tirador individualmente. Compatible con los cañones perforados y roscados de fábrica recientes; perfora y rosca cañones más antiguos. Acepta todos los anillos estilo Weaver.
ESPECIFICACIONES: Aluminio, acabado anodizado negro. 6" (15cm) de largo. Modelos separados para cañones pesados de 7" de largo o de 5-1/2". Incluye tornillos e instrucciones.
Más...
Evaluaciones de clientes para LSP 7" SMITH & WESSON
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 3,5
Great Optic Mount Rail for the S&W M41(20/07/2014)
Perfect fit to the barrel contour of my 5.5" barrel Model 41. Easy installation, and my Aimpoint Micro with integral Weaver base mounted right up with no problems. The LSP rail has many more mounting spaces than the Weaver or Weigand bases and is very well made. It has a generous "U" channel down the middle that allow you to use the irons with the optic dismounted if you wish.
Product needs improvement.(20/10/2012)
Would never buy this product again, unless they fix the problem. I bought 2 of them but had to send them back. They fit the S&W model 41 ok, but scope rings don't tighten on the base. Not wide enough. Supposed to measure .829 across, but the two I had measured .810 to .818 end to end. I send them back, but they couldn't find one that measured what they should. I sure hope the fix the problem, because over all the product was great. It fit my 41 perfect but needs to be the right size so weaver style rings will work with it the way they said it will.
N.º de producto: 530041007 LSP 7" SMITH & WESSON Ref Fabricante: 530041007 Riel para mira telescópica ligero y extra largo que proporciona suficiente longitud para que el alivio ocular pueda ser ajustado con precisión para cada tirador individualmente. Compatible con los cañones perforados y roscados de fábrica recientes; perfora y rosca cañones más antiguos. Acepta todos los anillos estilo Weaver.
64.9EUR464,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Color: BlackEstilo: Weaver-Style BasesHacer: Smith & WessonMaterial: AluminioModelo: 41Numero de bases: 1-Piece
Riel para mira telescópica ligero y extra largo, compatible con cañones perforados y roscados de fábrica recientes, y cañones más antiguos.
Acepta todos los anillos estilo Weaver y está fabricado en aluminio con acabado anodizado negro.
Disponible en modelos para cañones pesados de 7" o de 5-1/2", incluye tornillos e instrucciones.
Atributos
Color:
Black
Estilo:
Weaver-Style Bases
Hacer:
Smith & Wesson
Material:
Aluminio
Modelo:
41
Numero de bases:
1-Piece
Peso de entrega: 0,091kgAltura de envío: 10mmAncho de envío: 81mmLongitud de envío: 191mm
Detalles del artículo
Hecho en USA
N.º de producto: 530041055 LSP 5-1/2" SMITH & WESSON Ref Fabricante: 530041055 Riel para mira telescópica ligero y extra largo que proporciona suficiente longitud para que el alivio ocular pueda ser ajustado con precisión para cada tirador individualmente. Compatible con los cañones perforados y roscados de fábrica recientes; perfora y rosca cañones más antiguos. Acepta todos los anillos estilo Weaver.
64.9EUR464,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Color: BlackEstilo: Weaver-Style BasesHacer: Smith & WessonMaterial: AluminioModelo: 41Numero de bases: 1-Piece
Extra-Long Rails For Factory Drilled & Tapped Barrels
Lightweight, extra-long scope rail provides plenty of length so eye relief can be precisely tailored for each, individual shooter. Matches the recent, factory drilled and tapped barrels; drill and tap older barrels. Accepts all Weaver-style rings.
SPECS: Aluminum, black, anodized finish. 6" (15cm) long. Separate models for 7" Long or 5-1/2" Long Heavy barrel. Includes screws, instructions.
Más...
Rieles Extra Largos Para Cañones Perforados y Roscados de Fábrica
Riel para mira telescópica ligero y extra largo que proporciona suficiente longitud para que el alivio ocular pueda ser ajustado con precisión para cada tirador individualmente. Compatible con los cañones perforados y roscados de fábrica recientes; perfora y rosca cañones más antiguos. Acepta todos los anillos estilo Weaver.
ESPECIFICACIONES: Aluminio, acabado anodizado negro. 6" (15cm) de largo. Modelos separados para cañones pesados de 7" de largo o de 5-1/2". Incluye tornillos e instrucciones.
Más...
Evaluaciones de clientes para LSP 7" SMITH & WESSON
Número de evaluaciones: 2
De brownells.com: 2
Evaluación media: 3,5
Great Optic Mount Rail for the S&W M41(20/07/2014)
Perfect fit to the barrel contour of my 5.5" barrel Model 41. Easy installation, and my Aimpoint Micro with integral Weaver base mounted right up with no problems. The LSP rail has many more mounting spaces than the Weaver or Weigand bases and is very well made. It has a generous "U" channel down the middle that allow you to use the irons with the optic dismounted if you wish.
Product needs improvement.(20/10/2012)
Would never buy this product again, unless they fix the problem. I bought 2 of them but had to send them back. They fit the S&W model 41 ok, but scope rings don't tighten on the base. Not wide enough. Supposed to measure .829 across, but the two I had measured .810 to .818 end to end. I send them back, but they couldn't find one that measured what they should. I sure hope the fix the problem, because over all the product was great. It fit my 41 perfect but needs to be the right size so weaver style rings will work with it the way they said it will.