On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four bits to fit side plate, grip, thumb latch, and rear sight elevation and tang screws.
SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.
Más...
Autoalmacenables, Para Llevar Consigo por Armeros y Tiradores
Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier parte. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para ofrecerte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, Mango Hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas para ajustar los tornillos de la placa lateral, el mango, el pestillo del pulgar y los tornillos de elevación y tangencia de la mira trasera.
ESPECIFICACIONES: 8" (20.3cm) de largo en total. Diámetro del mango de 1¼" (3.2cm).
Más...
Evaluaciones de clientes para BROWNELLS S&W 4-IN-1 COMBO SCREWDRIVER
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 3,6
Tips are too thin for my J frame.(19/02/2017)
This set of bits are good quality, but were useless for the side plate and crane screws on a 1999 640-1and a 2016 340 M&P. The tip thickness of the 150-3 included in the set is too thin to properly fit the screw notches.
The Best(04/09/2009)
The only Screwdrivers and bits I use to work on Guns.
VERY NICE!(18/08/2010)
These Brownell bits are superbly crafted and fit all my S&W revolvers, from J-Frames to N-Frames. Plus, they fit many slotted fasteners on my rifles too. I'm so impressed, I'm going to order a complete Brownell's bit set.
Not up to Brownells usual quality(27/10/2011)
On the very first screw, a side plate screw, the screwdriver tip bent and buggered up the screw head. Very dissappointed!
Excellent Bits(06/04/2012)
My armored courier company very recently began issuing semi-automatics. But before that, everyone brought me their guns to clean. This 4-in-1 screwdriver let me clean and lubricate everything on our model 64's easily and without damage to the weapons. If you're doing anything with a S&W revolver, you need this.
Nice set, but missing an important bit.(08/08/2014)
I like the bits and the handle and the idea of including a set up the most used bits for a S&W revolver. The problem is, the MOST used bit for my N framed 625 isn't included. None of the included bits properly fit the yoke screw (which appears to need a 180-4 bit. Some of the bits that are included don't seem to fit anything on my revolver. They may be for a different frame size. But, the kit should have the proper yoke screw bit for each frame size.
Excellent Product(08/02/2017)
Purchased this set for my S&W 460 and 500. The smallest bit seems to have no real use for my S&W X-frames, the other bits are excellent for the side plate and cylinder release screws.
The larger bit is good for the grip screw but somewhat undersized. Overall an excellent product!
N.º de producto: 080087004 BROWNELLS S&W 4-IN-1 COMBO SCREWDRIVER050806007970 Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier parte. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para ofrecerte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, Mango Hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas para ajustar los tornillos de la placa lateral, el mango, el pestillo del pulgar y los tornillos de elevación y tangencia de la mira trasera.
44.9EUR8744,90 €
*
Plazo de entrega de aproximadamente 14-21 días.
Caracteristicas:Estilo: 4-BitsHacer: Smith & WessonManejo: 84 HollowModelo: Universal Handguns
Destornilladores compactos y portátiles con puntas Magna-Tip® para un ajuste preciso en armas Smith & Wesson.
Incluye cuatro puntas para ajustar tornillos específicos: placa lateral, mango, pestillo del pulgar y mira trasera.
Mango hueco con casquillo magnético para almacenamiento fácil de las puntas; longitud total de 8" y diámetro del mango de 1¼".
Atributos
Estilo:
4-Bits
Hacer:
Smith & Wesson
Manejo:
84 Hollow
Modelo:
Universal Handguns
Peso de entrega: 0,113kgAltura de envío: 10mmAncho de envío: 18mmLongitud de envío: 102mm
UPC
: 050806007970
Detalles del artículo
Hecho en USA
N.º de producto: 080087002 BROWNELLS S&W COMBO BITS ONLY050806007963 Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier parte. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para ofrecerte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, Mango Hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas para ajustar los tornillos de la placa lateral, el mango, el pestillo del pulgar y los tornillos de elevación y tangencia de la mira trasera.
24.9EUR024,90 €
*
Pedido pendiente, tiempo de entrega aproximado 4-12 semanas desde el almacén de EE. UU.
Caracteristicas:Hacer: Smith & WessonModelo: Universal Handguns
On the bench or in the field, you ll have the right screwdrivers for your gun in one compact, go-anywhere package. We precisely matched each gun s screws to the correct Magna-Tip® bits to give you the best possible, blade-to-slot fit. Except where indicated otherwise, each set comes with a magnetic socket, Hollow Handle for easy, on-board storage of the bits. Four bits to fit side plate, grip, thumb latch, and rear sight elevation and tang screws.
SPECS: 8" (20.3cm) long overall. 1¼" (3.2cm) diameter grip.
Más...
Autoalmacenables, Para Llevar Consigo por Armeros y Tiradores
Tanto en el taller como en el campo, tendrás los destornilladores adecuados para tu arma en un paquete compacto que puedes llevar a cualquier parte. Hemos combinado con precisión los tornillos de cada arma con las puntas Magna-Tip® correctas para ofrecerte el mejor ajuste posible entre la hoja y la ranura. Excepto donde se indique lo contrario, cada conjunto viene con un casquillo magnético, Mango Hueco para un fácil almacenamiento a bordo de las puntas. Cuatro puntas para ajustar los tornillos de la placa lateral, el mango, el pestillo del pulgar y los tornillos de elevación y tangencia de la mira trasera.
ESPECIFICACIONES: 8" (20.3cm) de largo en total. Diámetro del mango de 1¼" (3.2cm).
Más...
Evaluaciones de clientes para BROWNELLS S&W 4-IN-1 COMBO SCREWDRIVER
Número de evaluaciones: 7
De brownells.com: 7
Evaluación media: 3,6
Tips are too thin for my J frame.(19/02/2017)
This set of bits are good quality, but were useless for the side plate and crane screws on a 1999 640-1and a 2016 340 M&P. The tip thickness of the 150-3 included in the set is too thin to properly fit the screw notches.
The Best(04/09/2009)
The only Screwdrivers and bits I use to work on Guns.
VERY NICE!(18/08/2010)
These Brownell bits are superbly crafted and fit all my S&W revolvers, from J-Frames to N-Frames. Plus, they fit many slotted fasteners on my rifles too. I'm so impressed, I'm going to order a complete Brownell's bit set.
Not up to Brownells usual quality(27/10/2011)
On the very first screw, a side plate screw, the screwdriver tip bent and buggered up the screw head. Very dissappointed!
Excellent Bits(06/04/2012)
My armored courier company very recently began issuing semi-automatics. But before that, everyone brought me their guns to clean. This 4-in-1 screwdriver let me clean and lubricate everything on our model 64's easily and without damage to the weapons. If you're doing anything with a S&W revolver, you need this.
Nice set, but missing an important bit.(08/08/2014)
I like the bits and the handle and the idea of including a set up the most used bits for a S&W revolver. The problem is, the MOST used bit for my N framed 625 isn't included. None of the included bits properly fit the yoke screw (which appears to need a 180-4 bit. Some of the bits that are included don't seem to fit anything on my revolver. They may be for a different frame size. But, the kit should have the proper yoke screw bit for each frame size.
Excellent Product(08/02/2017)
Purchased this set for my S&W 460 and 500. The smallest bit seems to have no real use for my S&W X-frames, the other bits are excellent for the side plate and cylinder release screws.
The larger bit is good for the grip screw but somewhat undersized. Overall an excellent product!