Traditional & Increased-Capacity Magazines For 1911 Colts, Copies & Compacts
Robust, high-quality U.S. made magazines in blued carbon steel and stainless steel for 1911 Auto pistols chambered in a variety of calibers. Choose from round or flat steel followers, both designed to give positive last-round feeding with all bullet types, including wadcutters. Safety orange nylon follower is concave to hold an additional round. Three floorplate configurations available: Welded – Flat, steel plate permanently welded to magazine body, with screw holes to accept Metalform Bumper Pads.
SPECS: Blued carbon steel (Blue) or natural-finish stainless steel (Stnls). Approximately 5" (12.7cm) long. Followers – Stainless steel, natural silver or black finish, flat or round contour. Some magazines have concave safety orange nylon follower.
Más...
Cargadores Tradicionales y de Alta Capacidad para Colts 1911, Réplicas y Compactas
Cargadores robustos y de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para proporcionar una alimentación positiva del último cartucho con todos los tipos de balas, incluyendo los wadcutters. El seguidor de nylon naranja de seguridad es cóncavo para contener una bala adicional. Tres configuraciones de base disponibles: Soldada – Placa de acero plana, soldada permanentemente al cuerpo del cargador, con agujeros para tornillos para aceptar las Almohadillas de Parachoques de Metalform.
ESPECIFICACIONES: Acero al carbono azulado (Blue) o acero inoxidable de acabado natural (Stnls). Aproximadamente 5" (12.7cm) de largo. Seguidores – Acero inoxidable, acabado natural plateado o negro, contorno plano o redondo. Algunos cargadores tienen seguidor de nylon naranja de seguridad cóncavo.
Más...
Evaluaciones de clientes para METALFORM .45 GOVT/COMM S/S 8 RD. FLAT FOLLOWER W/WELDED BASE
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,4
promising but no(18/01/2018)
on the positive side, this is one of very few magazines on the market with hybrid feed lips. Which means it feeds as 1911 was designed to feed, or close to it. And, it's a flush fitting 8rd magazine, which is nice.
On the negative side, 1) it consistently fails limp wristing test through the top 3 rounds and 2) it overrides the mag catch, which is not a trivial failure. It remains to be seen if this can be remedied, but as it comes from the factory this magazine is unfortunately unacceptable.
Solid performer, simple(29/01/2010)
Been using these mags for 7 years now. No rust yet. Follower design engages slide stop every time I run empty, and the feed lips are holding. If you reload semi-wadcutters, load up a few dummy rounds first to get the case OAL correct to ensure flawless magazine function. The only negative I can think of is that the great follower design is tricky to remove for magazine cleaning and inspection.
100%(05/03/2011)
Springfield provided these mags with all three 1911s I own. I have about 20 of them and not one has ever failed me. They may not look like they are made of quality but trust me, they will work!
Great quality - Great price!(13/02/2012)
Excellent value. So dependable that I have been using in my carry gun for 15+ years. Suggest if used for competition that rubber bumpers be used; any magazine can only withstand so many speed change drops to the ground. Disassembly not difficult with a short piece of wood ruler (to depress follower) and small punch to hold spring. Round follower works exceptionally well.
Breakage/wad feeding problems(25/12/2012)
Had floorplate fall off, MF replaced with one that wouldn't feed 190 gr lee wheelweight cast semi-wad. Other mag worked fine.
Solid and Simple(18/08/2015)
I purchased three of these and so far I am happy. They work great in my 1911. Feeding and performance is as good as my 47Ds, CMC Power mags and CheckMate 7rnd hybrid feed-lip w/ dimpled follower. The rounded follower design helps to mimic a round below the last round and will ensure positive ejection should your extractor fail. Removal of the follower for magazine cleaning takes a little more effort. Overall, I think it is a great design and I have no complaints.
No HP or SWC(26/11/2015)
i bought 6 of these earlier this year, as arrived none would feed high performance .45-185gr-HP or .45-185gr-SW. when i went to open the feed lips to decrease the feed angle, the feed lips cracked on 3 of the 6, making them useless. buy something else.
Worked well for a long time(24/03/2016)
Have used these mags a lot. Have only had spring issues with one. After countless speed and tac reloads finally cracked the welds and bent the bases on several of these mags. Other than that for the price they have been great mags and have carried them for duty for many years.
Sub part welds(06/07/2016)
I received two of these mags for use in my 1911 and BOTH of the base plates broke off in the same manner. I had seven round in the mag and when I tried to chamber a round, the base plate fell off, along with the spring, follower and the rest of the ammo. I will never buy these again.
Good product(13/03/2017)
I bought 2 of these mags for my Series 70 Colt. Fit was perfect and worked flawlessly. Good product. Better then my Colt Mags. I like the SS followers.
N.º de producto: 620045084 METALFORM .45 GOVT/COMM S/S 8 RD. FLAT FOLLOWER W/WELDED BASE Ref Fabricante: 45-798 Cargadores robustos y de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para proporcionar una alimentación positiva del último cartucho con todos los tipos de balas, incluyendo los wadcutters. El seguidor de nylon naranja de seguridad es cóncavo para contener una bala adicional. Tres configuraciones de base disponibles: Soldada – Placa de acero plana, soldada permanentemente al cuerpo del cargador, con agujeros para tornillos para aceptar las Almohadillas de Parachoques de Metalform.
Cargadores de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto.
Capacidad de 8 cartuchos con seguidores de acero redondos o planos, diseñados para una alimentación positiva del último cartucho.
Tres configuraciones de base disponibles, incluyendo una base soldada con agujeros para tornillos para aceptar Almohadillas de Parachoques de Metalform.
Atributos
Acabado:
Silver
Capacidad:
8-Round
Cartucho:
45 Auto (ACP)
Hacer:
1911
Material:
Stainless Steel
Modelo:
Commander,Government
Peso de entrega: 0,023kgAltura de envío: 13mmAncho de envío: 64mmLongitud de envío: 132mm
Detalles del artículo
Hecho en USA
Clasificación de exportación de EE. UU.: 0A501.x
Estos artículos están controlados por el gobierno de los EE. UU. Y autorizados para exportar solo al país de destino final para que los utilicen el destinatario final o el / los usuario (s) final (es) aquí identificado (s). No pueden ser revendidos, transferidos ni eliminados de otra manera, para cualquier otro país o a cualquier otra persona que no sea el destinatario final o el (los) usuario (s) final (es) autorizado (s), ya sea en su forma original o después de haber sido incorporados a otros artículos, sin obtener primero la aprobación del Gobierno de los EE. UU. de su ley y regulaciones.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Operador económico responsable según el reglamento de la UE
Brownells España
P.I Molí d'en Xec / C.Barneda, 30
08291 Ripollet
España
info@brownells.es
N.º de producto: 620045001 METALFORM .45 GOVT/COMM BLUE 7 RD. ROUND FOLLOWER W/WELDED BASE Ref Fabricante: 45.297 Cargadores robustos y de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para proporcionar una alimentación positiva del último cartucho con todos los tipos de balas, incluyendo los wadcutters. El seguidor de nylon naranja de seguridad es cóncavo para contener una bala adicional. Tres configuraciones de base disponibles: Soldada – Placa de acero plana, soldada permanentemente al cuerpo del cargador, con agujeros para tornillos para aceptar las Almohadillas de Parachoques de Metalform.
N.º de producto: 620045002 METALFORM .45 GOVT/COMM S/S 7 RD. ROUND FOLLOWER W/WELDED BASE Ref Fabricante: 45.797 Cargadores robustos y de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para proporcionar una alimentación positiva del último cartucho con todos los tipos de balas, incluyendo los wadcutters. El seguidor de nylon naranja de seguridad es cóncavo para contener una bala adicional. Tres configuraciones de base disponibles: Soldada – Placa de acero plana, soldada permanentemente al cuerpo del cargador, con agujeros para tornillos para aceptar las Almohadillas de Parachoques de Metalform.
N.º de producto: 620045083 METALFORM .45 GOVT/COMM BLUE 8 RD. FLAT FOLLOWER W/WELDED BASE Ref Fabricante: 45-298 Cargadores robustos y de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para proporcionar una alimentación positiva del último cartucho con todos los tipos de balas, incluyendo los wadcutters. El seguidor de nylon naranja de seguridad es cóncavo para contener una bala adicional. Tres configuraciones de base disponibles: Soldada – Placa de acero plana, soldada permanentemente al cuerpo del cargador, con agujeros para tornillos para aceptar las Almohadillas de Parachoques de Metalform.
Traditional & Increased-Capacity Magazines For 1911 Colts, Copies & Compacts
Robust, high-quality U.S. made magazines in blued carbon steel and stainless steel for 1911 Auto pistols chambered in a variety of calibers. Choose from round or flat steel followers, both designed to give positive last-round feeding with all bullet types, including wadcutters. Safety orange nylon follower is concave to hold an additional round. Three floorplate configurations available: Welded – Flat, steel plate permanently welded to magazine body, with screw holes to accept Metalform Bumper Pads.
SPECS: Blued carbon steel (Blue) or natural-finish stainless steel (Stnls). Approximately 5" (12.7cm) long. Followers – Stainless steel, natural silver or black finish, flat or round contour. Some magazines have concave safety orange nylon follower.
Más...
Cargadores Tradicionales y de Alta Capacidad para Colts 1911, Réplicas y Compactas
Cargadores robustos y de alta calidad hechos en EE.UU. en acero al carbono azulado y acero inoxidable para pistolas 1911 Auto calibradas en una variedad de calibres. Elige entre seguidores de acero redondos o planos, ambos diseñados para proporcionar una alimentación positiva del último cartucho con todos los tipos de balas, incluyendo los wadcutters. El seguidor de nylon naranja de seguridad es cóncavo para contener una bala adicional. Tres configuraciones de base disponibles: Soldada – Placa de acero plana, soldada permanentemente al cuerpo del cargador, con agujeros para tornillos para aceptar las Almohadillas de Parachoques de Metalform.
ESPECIFICACIONES: Acero al carbono azulado (Blue) o acero inoxidable de acabado natural (Stnls). Aproximadamente 5" (12.7cm) de largo. Seguidores – Acero inoxidable, acabado natural plateado o negro, contorno plano o redondo. Algunos cargadores tienen seguidor de nylon naranja de seguridad cóncavo.
Más...
Evaluaciones de clientes para METALFORM .45 GOVT/COMM S/S 8 RD. FLAT FOLLOWER W/WELDED BASE
Número de evaluaciones: 10
De brownells.com: 10
Evaluación media: 3,4
promising but no(18/01/2018)
on the positive side, this is one of very few magazines on the market with hybrid feed lips. Which means it feeds as 1911 was designed to feed, or close to it. And, it's a flush fitting 8rd magazine, which is nice.
On the negative side, 1) it consistently fails limp wristing test through the top 3 rounds and 2) it overrides the mag catch, which is not a trivial failure. It remains to be seen if this can be remedied, but as it comes from the factory this magazine is unfortunately unacceptable.
Solid performer, simple(29/01/2010)
Been using these mags for 7 years now. No rust yet. Follower design engages slide stop every time I run empty, and the feed lips are holding. If you reload semi-wadcutters, load up a few dummy rounds first to get the case OAL correct to ensure flawless magazine function. The only negative I can think of is that the great follower design is tricky to remove for magazine cleaning and inspection.
100%(05/03/2011)
Springfield provided these mags with all three 1911s I own. I have about 20 of them and not one has ever failed me. They may not look like they are made of quality but trust me, they will work!
Great quality - Great price!(13/02/2012)
Excellent value. So dependable that I have been using in my carry gun for 15+ years. Suggest if used for competition that rubber bumpers be used; any magazine can only withstand so many speed change drops to the ground. Disassembly not difficult with a short piece of wood ruler (to depress follower) and small punch to hold spring. Round follower works exceptionally well.
Breakage/wad feeding problems(25/12/2012)
Had floorplate fall off, MF replaced with one that wouldn't feed 190 gr lee wheelweight cast semi-wad. Other mag worked fine.
Solid and Simple(18/08/2015)
I purchased three of these and so far I am happy. They work great in my 1911. Feeding and performance is as good as my 47Ds, CMC Power mags and CheckMate 7rnd hybrid feed-lip w/ dimpled follower. The rounded follower design helps to mimic a round below the last round and will ensure positive ejection should your extractor fail. Removal of the follower for magazine cleaning takes a little more effort. Overall, I think it is a great design and I have no complaints.
No HP or SWC(26/11/2015)
i bought 6 of these earlier this year, as arrived none would feed high performance .45-185gr-HP or .45-185gr-SW. when i went to open the feed lips to decrease the feed angle, the feed lips cracked on 3 of the 6, making them useless. buy something else.
Worked well for a long time(24/03/2016)
Have used these mags a lot. Have only had spring issues with one. After countless speed and tac reloads finally cracked the welds and bent the bases on several of these mags. Other than that for the price they have been great mags and have carried them for duty for many years.
Sub part welds(06/07/2016)
I received two of these mags for use in my 1911 and BOTH of the base plates broke off in the same manner. I had seven round in the mag and when I tried to chamber a round, the base plate fell off, along with the spring, follower and the rest of the ammo. I will never buy these again.
Good product(13/03/2017)
I bought 2 of these mags for my Series 70 Colt. Fit was perfect and worked flawlessly. Good product. Better then my Colt Mags. I like the SS followers.